Kent · England

Bathroom Resealing in Sheerness

Baths, showers and worktops in Sheerness need attention? We cut out the old, prepare the joints and apply the right sealant.

  • A reseal done over the top of the old bead
  • A joint torn by a bath that flexes
  • Damp behind the bath or under the tray

Bathroom resealing near Sheerness

Bathroom resealing for homes and businesses in Sheerness

A shower joint gets soaked every day. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. We work on shower trays & enclosures, wet rooms and baths, and the jobs we see most are damp behind the bath or under the tray and black spots spreading through the bead.

In a smaller place like Sheerness, homes are mostly houses and bungalows rather than flats, from older cottages to newer builds. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.

The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.

Location
Sheerness (ME12)
Wider area
Kent
Guarantee
One year on every job
Quote
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

How the visit works

The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. Expect the work to take a morning or an afternoon for most single baths and showers, and we tell you how long to leave it before we go. In a smaller place like Sheerness, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.

  1. We start by protecting the area and stripping out the old bead, including the film left on the tiles.
  2. We clean and degrease the joint and treat any mould.
  3. We let it dry fully and fill the bath with water before sealing.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. We tidy up and give you the cure time, usually around 24 hours.

Getting ready for the visit

  • Tell us about access, such as stairs, a lift or high-level joints
  • Tell us about any previous sealing or DIY attempts
  • Let us know if you’ve seen damp or leaks

Getting a quote

Getting a quote is simple: let us know the job and the location. A few pictures by email make the job easier to understand.

Ask for a quote

Related advice

Do you need bathroom resealing in Sheerness?

With age, silicone loses its stretch. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Hot pans and harsh cleaners don’t help.

Signs it’s time to call us include:

  • Leaks into the floor or ceiling below
  • Gaps where the bath or tray has moved
  • Leaking joints on a shower screen
  • Water getting behind the kitchen upstand

Rented homes near Sheerness-On-Sea station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.

Before you book anyone

  • What the cure time is
  • How the surfaces are prepared before sealing
  • Is VAT in the price?
  • How the colour is chosen

10 questions to ask before booking

What affects the cost of bathroom resealing

Your quote is based on your job. We look at:

  • Mould in or behind the old joints
  • The type of sealant required
  • Whether the work is at height
  • Any working-time requirements on site

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.

What to tell us for a quote

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • The type of property
  • The rough size of the job
  • How we’d reach the joints
  • Where the property is

We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.

Why deal with it now?

Leaving a split or mouldy bead only stores up trouble. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, turning a small job into a building repair. Around Sheerness, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.

What it costs depends on the amount of work, how much old material has to come out and access to the work. You will have a clear quote before any work starts.

Why book with us

  • Any old sealant cut out fully, not covered over
  • 4.9 on Google from 180+ five-star reviews
  • Trusted Arbo and Everbuild sealants
  • Homes, businesses and hotels

Read our cost guide and customer reviews.

Bathroom resealing around Sheerness

Sheerness is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Schools such as Rose Street Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around Parish Church of the Holy Trinity, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Sheerness is about 7 miles north of Sittingbourne, in Kent. If you need bathroom resealing in Sheerness, it’s easy to get a quote: please phone 0345 464 0079 or send us an email. We cover Kent from our Crawley base. Across Kent, we cover 922 places, and Sheerness is one of them. We also work in Chelmsford, around 24 miles away.

Our applicators cover all of ME12 for bathroom resealing and the streets around it. Whether your property is on High Street, Granville Road and Millennium Way or anywhere close by, our applicators can take on the job. With the A249 and A250 close by, Sheerness is easy for our applicators to reach. We also cover the places around Sheerness: Blue Town (1 mile north-west), Halfway Houses (1 mile south-east), Queenborough (2 miles south), Rushenden (2 miles south-west) and Grain (2 miles north-west). Further out, we also cover Sittingbourne (7 miles south), Whitstable (13 miles south-east), Faversham (10 miles south-east), Davington (10 miles south-east), Foley Park (15 miles south-west) and Preston (10 miles south-east).

Landmarks near Sheerness

Locally, jobs take us to homes and businesses close to Oasis Academy Isle of Sheppey, Barton's Point Coastal Park and The Crown pub and the streets around them. There’s a railway station in Sheerness itself: Sheerness-On-Sea station. Other landmarks nearby include Rose Street Cottage of Curiosities (under half a mile north).

Map of Sheerness © OpenStreetMap contributors

Sheerness: your questions answered

Do you cover smaller places like Sheerness?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do you work for landlords with property near Sheerness-On-Sea station?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.

Can I choose the colour of the sealant?

White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.

What information do you need?

Let us know what needs doing and where. We will ask anything else we need to know.

Do you guarantee your resealing?

Yes, a 12-month guarantee. Looking after the joint as we suggest helps it last.

How long does it take to reseal a bath or shower?

That depends on the number of joints and the state of the old sealant. For most single baths or showers, allow a couple of hours.

Do the sealants smell?

That depends on the sealant. Some products have a noticeable smell, others very little.

What do you put in the joint?

Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.

Can I do it myself?

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

When it isn’t the sealant

New sealant can’t fix everything, and we’d rather say so up front. It won’t solve:

  • Failed grout lines across the wall
  • A tray that rocks until it’s re-bedded
  • A leaking waste, trap or valve

If in doubt, call 0345 464 0079 or email us and we will say what we think before booking.

Where we work in Sheerness

  • Basins & vanity units
  • Sinks & splashbacks
  • Wet rooms
  • Baths
  • Kitchen worktops & upstands
  • Shower trays & enclosures

For landlords and businesses

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.

We work for landlords and agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job