Kent · England
Sheerness Gutter Sealing
Gutter sealing in Sheerness from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Wet patches on the wall under a gutter joint
- Water dripping where gutter sections meet
- Quick sealant fixes on gutters that didn’t last
Why deal with it now?
Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. In an older home around Sheerness, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
What you get with us
- Old sealant always removed completely
- 180+ five-star Google reviews
- Sealant colour chosen to suit
- Colour agreed with you before we start
See our cost guide or customer reviews.
How we handle gutter sealing in Sheerness
Gaps along uPVC fascias and soffits look untidy and can let in water and draughts. We seal them in a colour to suit where possible. Common call-outs are for streaks down the brickwork from a leaking joint and dripping gutter ends, across gutter end caps, garage door frames and uPVC fascias.
Outbuildings, garages and conservatories around homes in places like Sheerness add more joints to look after. Leaks usually start at a gutter end, a garage door frame or where an extension meets the house.
Whatever the size of the job, it’s backed by our one-year guarantee in Sheerness and across Kent.
- Location
- Sheerness (ME12)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Also near Sheerness
Other services in Sheerness
What we do, step by step
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes an hour or two for a few joints, longer for a full run. Parking around Sheerness is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We look at where the water is coming from and check the gutter is not broken or sagging.
- We clean out the joint and take out the old sealant.
- The area is dried so the sealant can bond.
- Gutter or exterior sealant is applied and finished.
- We look along the gutter and clear debris around the joints.
Getting ready for the visit
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
Want a quote for gutter sealing? Please phone 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Signs you need gutter sealing in Sheerness
End caps get knocked or pushed by water. Once the seal behind them fails, they drip and runs down the wall.
Look out for any of the following:
- Rain getting in around a garage door
- Water dripping where gutter sections meet
- Old gutter sealant that has let go
- Internal damp traced to a gutter joint
Homes close to Parish Church of the Holy Trinity include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Before booking anyone
- Whether they seal over old material or remove it
- What preparation is included
- How long the guarantee is
- What happens if the job turns out different
Landlord and commercial work in Sheerness
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Landlords and letting agents in Sheerness can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
Gutter sealing in Sheerness: local notes
Sheerness is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Managing a site like Rose Street Primary School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Letting a property close to Sheerness-On-Sea station? Then a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Sheerness is about 7 miles north of Sittingbourne, in Kent. Our applicators cover gutter sealing for homes and businesses in Sheerness and nearby. We cover 922 towns and villages across Kent, large and small. There’s also a page for Chelmsford, roughly 24 miles from Sheerness.
Postcode districts we cover here for gutter sealing: ME12. We cover properties on High Street, Granville Road and Millennium Way. Main roads around Sheerness include the A249 and A250, which makes travel easy. We also cover the places around Sheerness: Blue Town (1 mile north-west), Halfway Houses (1 mile south-east), Queenborough (2 miles south), Rushenden (2 miles south-west) and Grain (2 miles north-west). Further out, we also cover Sittingbourne (7 miles south), Whitstable (13 miles south-east), Faversham (10 miles south-east), Davington (10 miles south-east), Foley Park (15 miles south-west) and Preston (10 miles south-east).
Landmarks near Sheerness
Typical jobs here are in homes near Oasis Academy Isle of Sheppey, Barton's Point Coastal Park and The Crown pub, among other places. There’s a railway station in Sheerness itself: Sheerness-On-Sea station. Nearby you’ll also find Rose Street Cottage of Curiosities (within half a mile north).
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Guttering that needs replacing
- Water backing up from a blocked pipe
- Brackets that have snapped or loosened
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Roofline trims
- Gutter end caps
- Gutter joints
- Soffit joints
- uPVC fascias
- Garage door frames
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
How the job changes by surface
Gutter joints
Joints between gutter lengths are the most common leak point. We clean, dry and reseal them.
Soffit joints
We choose a sealant colour that suits the soffit, where one is available.
Sheerness questions
Will you come out to Sheerness?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Sheerness-On-Sea station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
Do you replace gutters or fascias?
Replacement is not our trade. We will tell you if the gutter needs replacing.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Is sealant enough for a gutter that has dropped?
Sealing a sagging joint will not last. A gutter installer needs to refix it, and we’ll tell you if that is what we find.
Is it OK to seal over old sealant?
No. The old sealant always comes out first, so the new joint bonds to clean surfaces.
How long does the job take?
Typically it takes an hour or two for a few joints, longer for a full run. Bigger jobs take longer.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.