Medway · England
Bathroom & kitchen resealing in Wallend, Medway
Problem with your baths, showers and worktops in Wallend? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Cracked, shrunken or lifting silicone
- A messy, uneven bead from a previous reseal
- Gaps between the worktop and the wall
Different surfaces, different methods
Baths
Acrylic baths give a little under load, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
Kitchen worktops & upstands
Worktop joints get wet and wiped every day. We seal them in a colour that suits the worktop.
Bathroom resealing in Wallend
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. Once it cracks or goes mouldy, water starts to find its way through. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We work on sinks & splashbacks, basins & vanity units and baths, and common reasons people get in touch are lumpy, uneven sealant from a DIY attempt and damp behind the bath or under the tray.
Homes around Wallend are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
All of our work is guaranteed for twelve months.
- Location
- Wallend (ME3)
- Region
- Medway
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Looking after it afterwards
To keep the joints looking good and working properly:
- Let new sealant cure fully before it gets wet
- Move toiletries away from the joint
- Squeegee the walls and tray after use
- Keep an eye on the corners, where splits start
Have a look at the joints every few months. A small split or a corner lifting is easy to spot, so if something does not look right, just phone 0345 464 0079 or email us.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
How we quote for bathroom resealing
Your quote is based on your job. We take into account:
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- Which sealant suits the joint
- Access and height
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What to tell us for a quote
You don’t need to know the technical terms. Just tell us:
- Pictures of the joints, sent by email
- How we’d reach the joints
- Where the property is
- Whether it has been sealed before
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Why it’s worth doing now in Wallend
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is normally all it takes, as long as the fittings themselves are sound. If something else is wrong, we will tell you. In a small place like Wallend, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why choose Mr Mastic in Wallend
- We never seal over old sealant
- Sealant colour chosen to suit
- Anti-fungal silicone where joints get wet
- A 12-month guarantee on all work
Read our cost guide or what customers say.
Places near Wallend
More services for Wallend
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
Hotels need rooms back in use, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Bathroom resealing around Wallend
Wallend is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Sheerness-On-Sea station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. If you live in an older home near Church of St James, walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as St James Church of England Primary Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.
Wallend is about 5 miles north-west of Minster, in Medway. Whether you’re in the middle of Wallend or further out, we cover bathroom resealing for every kind of property. We cover 68 towns and villages across Medway. There’s also a page for Chelmsford, roughly 22 miles from Wallend.
Work in ME3 is quoted and booked the same way as anywhere else. You’ll find Wallend on the B2001, which makes it straightforward to reach with everything needed for bathroom resealing. Nearby, we also carry out bathroom resealing in Grain (1 mile east), Blue Town (2 miles east), Sheerness (3 miles east), Queenborough (3 miles south-east) and Rushenden (3 miles south-east). Larger places within reach include Gillingham (8 miles south-west), Chatham (10 miles south-west), Rochester (10 miles south-west), Rainham (8 miles south-west), Strood (10 miles south-west) and Luton (9 miles south-west).
Around Wallend
Locally, jobs take us to homes and businesses close to The Hogarth Inn, among other places. The closest station to Wallend is Sheerness-On-Sea station, roughly 2.6 miles east. A little further out are Bluetown Heritage Centre (2.3 miles east). For a walk, there’s Bishop Saltings.
Wallend questions
Can you do bathroom resealing in Wallend?
Yes. We work across London and the South East, and Wallend is part of that. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
Do you work for landlords with property near Sheerness-On-Sea station?
Yes. We work for landlords and agents as well as homeowners. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Do I have to be there?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Do the sealants smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Should I try DIY first?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
Do you remove the old sealant?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
How the visit works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a morning or an afternoon for most single baths and showers. For a village or hamlet like Wallend, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Clear the area around the work
- Let us know about stairs, lifts or work at height
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.