Kent · England
Glazing Silicone in Murston
Glazing silicone for conservatories, rooflights, glass panels and shower screens in Murston, with a one-year guarantee on every job. Call for a quick quote.
- Sealant that was laid over old silicone and failed
- Mouldy sealant around glass panels
- Water tracking down the inner face of the glass
What the job involves on each surface
Glass-to-glass joints
Glass-to-glass joints depend entirely on the sealant. It must be clean, neat and well bonded.
Conservatory frames
The joints where the conservatory meets the house take a lot of movement. They’re resealed with a suitable sealant.
Glazing silicone in Murston, done properly
Across Murston, we reseal glazing joints in homes, offices and hotels. Conservatories, rooflights, glass panels and shower screens are all part of the job, with a sealant chosen for the joint. We work on rooflights, conservatory frames and shower screens, and the jobs we see most are new silicone smeared over old sealant and conservatory leaks at frame and glazing joints.
Many houses in smaller places like Murston have conservatories, garden rooms or patio doors. Their glazing joints and frame seals are as much a part of the job as the windows.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Murston (ME10, ME9)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes a few hours for most jobs for a typical job. In a smaller place like Murston, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We look at the glazing and agree which joints need resealing.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
Before we arrive
- Try not to wet indoor joints just before the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any leaks or damp you’ve noticed
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, ring 0345 464 0079 or email us.
Advice
Towns and villages near Murston
What else we do in Murston
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Landlords, agents and businesses in Murston
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Questions from Murston
Do you work for landlords with property near Sittingbourne station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.
Is Murston within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Can you just put new silicone over the old?
New silicone will not bond to old silicone and water gets between the layers. The old bead always comes out first.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We’ll tell you how long to leave the joint before we leave.
Do you offer different sealant colours?
Most of the time, yes. We will tell you which colours the right product comes in.
Do you fit new glass or sealed units?
We do not replace glass. We reseal the joints around it, and we will tell you if a unit looks like it has failed.
How much does glazing silicone cost in Murston?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before we start.
Glazing silicone in Murston: local notes
Murston is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on glazing joints and frame seals, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you let a flat or house near Sittingbourne station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. If you live in an older home near Church of All Saints, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall. Schools such as Sunny Bank Primary School are buildings too, and larger buildings have plenty of frames, and the mastic around each one ages.
Murston is about 1 mile east of Sittingbourne, in Kent. From the centre of Murston to the outskirts, we cover glazing silicone for every kind of property, from flats and houses to offices and hotels. Murston is one of 922 towns and villages in Kent we cover. You can also see our page for Chelmsford, about 30 miles away.
Our applicators cover all of ME10 and ME9 for glazing silicone. You’ll find streets such as Oak Road, Glebe Lane and Leigh Road. Nearby, we also carry out glazing silicone in Milton Regis (1 mile north), Sittingbourne (1 mile west), Tonge Corner (1 mile east), Rodmersham (1 mile south) and Kemsley (1 mile north). We also work in nearby towns such as Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (6 miles north).
What’s near Murston
Typical jobs here are in homes near Sittingbourne Community College, Milton Creek Country Park and The New Inn. Murston’s nearest station is Sittingbourne station, roughly 0.7 miles west of the centre. Other landmarks nearby include Sittingbourne Heritage Museum (within half a mile west) and Bayford Court (within half a mile west).
What we cannot put right
It helps to know what we can’t do:
- A frame that needs repairing or replacing
- Leaks from the roof covering or flashing (a roofer’s job)
- Glass that needs replacing
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.
Where we work in Murston
- Glass-to-glass joints
- Rooflights
- Glass-to-frame joints
- Glass balustrade bases
- Conservatory frames
- Shower screens
Why act early in Murston
Resealing cannot fix a failed unit or a cracked panel. We say so plainly and point you to a glazier or roofer. In a smaller place like Murston, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email and we’ll talk you through it.
Why us?
- Colour agreed with you before any work starts
- Full insurance on every job
- Any old sealant cut out fully, not covered over
- Domestic, commercial and hotel work
What affects the cost of glazing silicone
We quote each job individually. These are the things that affect it:
- The product the joint needs
- The number of rooms or windows
- When we can work, for business premises
- Mould in or behind the old joints
The cost depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What to tell us for a quote
When you call or email, these details help:
- How many joints, rooms or windows are involved
- The problem you’ve noticed
- Access, such as stairs, a lift or height
- The type of property
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work before giving you a price.