Kent · England
Glazing & conservatory sealant in Milton Regis, Kent
Glazing silicone across Milton Regis and nearby, with old sealant always removed completely and a 12-month guarantee.
- Rooflight joints letting water in
- Leaks from the base of a shower screen
- Cracked silicone between glass panels
When something else is needed
In fairness, there are a few things sealant will not fix:
- Leaks from the roof covering or flashing (a roofer’s job)
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- A sagging or failing conservatory roof
If you’re not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer before you book.
Surfaces we seal
- Glass-to-frame joints
- Conservatory frames
- Shower screens
- Glass-to-glass joints
- Glass balustrade bases
- Rooflights
Glazing silicone in Milton Regis, done properly
Glazing joints need a sealant made for glass. Our applicators use neutral-cure glazing silicone that is suited to glass and the frame, finished with a neat, even bead. We work on glass-to-glass joints, rooflights and glass balustrade bases, and common reasons people get in touch are glazing silicone that has cracked or come away and water running down inside the glass.
Outdoor sealant needs dry, clean surfaces, so work on frames around Milton Regis is planned for dry weather. Let us know about access to all the frames, upstairs ones included.
All our work comes with a 12-month guarantee.
- Location
- Milton Regis (ME10)
- Region
- Kent
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Questions from Milton Regis
Is Milton Regis within the area you cover?
Yes. Milton Regis is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Does living near the coast affect glazing silicone in Milton Regis?
Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. It’s worth checking the walls that face the sea first.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or send us an email.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Are you fully insured?
Yes. We’re fully insured for every job we do.
Can you reseal a frameless shower screen?
Yes. We remove the old sealant and reseal the wall and tray joints.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours, depending on how many joints need doing. We’ll tell you when we quote.
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Nearby places to Milton Regis
What else we do in Milton Regis
Windows and doors in Milton Regis
Milton Regis is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Schools such as Sunny Bank Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s. Rented homes near Sittingbourne station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Milton Regis is about 1 mile north-east of Sittingbourne, in Kent. Every kind of property in Milton Regis is covered for glazing silicone, old or new, large or small. Every job comes with our 12-month guarantee. Our Kent coverage runs to 922 places, Milton Regis among them. We also work in Chelmsford, about 29 miles from Milton Regis.
Every address in ME10 is covered for glazing silicone. That includes homes and businesses on Castle Road, Church Road and Dolphin Road. Other places close to Milton Regis include Murston (1 mile south), Sittingbourne (1 mile south-west), Kemsley (1 mile north-west), Tonge Corner (1 mile east) and Tonge (1 mile east). Further out, we also cover Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (5 miles north-east).
Near you in Milton Regis
In Milton Regis, that means homes and buildings near The New Inn, Milton Creek Country Park and Borden Grammar School, among other places. For rail, the closest station is Sittingbourne station, roughly 0.8 miles south-west. A little further out are Dolphin Sailing Barge Museum (less than half a mile south-west) and Bayford Court (0.6 miles south-west).
Landlord and commercial work in Milton Regis
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
If you manage several properties in or around Milton Regis, several properties can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Different surfaces, different methods
Rooflights
Rooflight glazing joints are cut out and renewed. Leaks from the roof itself need a roofer.
Glass-to-glass joints
Frameless glass corners and panels are joined with silicone. We reseal with a suitable glazing silicone.
What we’re called out for in Milton Regis
Not every leak is a sealant problem: broken panels, roof problems and blocked gutters can all let water in. We find the cause before we seal anything.
It’s worth asking for a quote if you see:
- Glazing silicone that has cracked or come away
- Mouldy sealant around glass panels
- Rooflight joints letting water in
- Water getting into a conservatory at the joints
Homes close to Church of All Saints include some older properties, and frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Comparing quotes
- Who does the work, and how experienced they are
- How long to leave it before use
- How the joint is cleaned and prepared
- Whether you can choose the colour
What affects the cost of glazing silicone
Some jobs are bigger than they look, and some smaller. The main factors:
- How many areas need sealing
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
To make quoting easier, let us know:
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- The rough size of the job
- Any access issues, like height or stairs
There’s no standard price list. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or drop us an email.
What we do, step by step
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. Most jobs take a few hours, depending on how many joints need doing. For a village or hamlet like Milton Regis, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- We inspect the work and test it where we can.
Preparing for the visit
- Clear the area around the work
- Mention any parking rules near the property
- Let us know if you’ve seen damp or leaks
Get a quote
For glazing silicone in Milton Regis, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.