Kent · England
Mountain Street Gutter Sealing
Gutter sealing for Mountain Street, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Earlier gutter repairs that have peeled off
- Old sealant on roofline trims that has split
- Dripping gutter ends
Why deal with it now?
Replacing fascias because of open joints is generally unnecessary. Sealing the joints tidies them up as long as the boards are in good condition. Where a wall is exposed, as many are in small places like Mountain Street, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why us?
- Rated 4.9 stars on Google
- More than 20 years in sealant work
- You choose the colour before work begins
- Anti-fungal sanitary silicone in wet areas
See our cost guide and what customers say.
About our gutter sealing in Mountain Street
A drip at a gutter joint is easy to ignore, but the water lands on the same spot every time it rains. Resealing it is a small job if the gutter is otherwise in good order. We work on garage door frames, gutter end caps and uPVC fascias, and people most often call us about old sealant on roofline trims that has split and stop ends leaking at the end of a run.
Older homes in small places like Mountain Street may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
Big or small, it’s backed by our 12-month guarantee in Mountain Street and across Kent.
- Where
- Mountain Street (CT4)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Gutter sealing in Mountain Street: local notes
London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Rented homes near Chilham station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Mountain Street is about 6 miles south-west of Canterbury, in Kent. Our applicators cover gutter sealing for homeowners, landlords and businesses in Mountain Street. Across Kent, we cover 922 places, Mountain Street among them. Our Chelmsford page covers work nearby, about 40 miles away.
Postcode districts we cover here for gutter sealing: CT4. Other places close to Mountain Street include Chilham (1 mile north-east), Godmersham (1 mile south), Old Wives Lees (1 mile north), Shottenden (2 miles north-west) and Bilting (2 miles south). We also work in nearby towns such as Ashford (8 miles south-west), Canterbury (6 miles north-east), Sittingbourne (12 miles north-west), Folkestone (14 miles south-east), Whitstable (9 miles north) and Faversham (6 miles north-west).
Landmarks near Mountain Street
In Mountain Street, that means homes and buildings near Woolpack Inn and Broadham Down, among other places. For rail, the closest station is Chilham station, roughly 0.8 miles north-east. Well-known places in the area include Kent and Canterbury Hospital (5.7 miles east) and Chilham Castle (within half a mile north).
Landlords, agents and businesses in Mountain Street
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too in Mountain Street and across Kent. Several sites can go on one quote.
How the visit works
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. The job generally takes a few hours, depending on the number of joints and the access. Somewhere like Mountain Street needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we trace the drip and check the gutter isn’t damaged.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Read more
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Clean out the gutters once or twice a year
- Check that water runs out of the downpipes
- Look at the gutters while it’s raining
- Get leaks sealed before the wet months
Leave the new sealant to cure as we advise and avoid disturbing it.
Once roofline sealant splits, water can get behind it. Sealing it early keeps the boards behind dry.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Brackets that have snapped or loosened
- Fascias that need replacing
- A gutter length that has split
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Garage door frames
- Roofline trims
- Soffit joints
- uPVC fascias
- Gutter end caps
- Gutter joints
Do you need gutter sealing in Mountain Street?
Stop ends take pressure from water running along the gutter. Once the seal behind them fails, they drip and runs down the wall.
Most people get in touch when they notice one of these:
- Damp on an inside wall under a dripping gutter
- Stop ends leaking at the end of a run
- Fascia boards with gaps between them
- Rain getting in around a garage door
In the older streets around Church of St Mary, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Before you book anyone
- Whether you can choose the colour
- What the quote includes, VAT included or not
- When the joint can take water or movement
- The length of the guarantee
Also near Mountain Street
More services for Mountain Street
Mountain Street questions
Can you do gutter sealing in Mountain Street?
Yes, Mountain Street is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Do you work for landlords with property near Chilham station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can you match the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in.
Can a leaking gutter joint be sealed?
Often, yes. A clean, dry joint resealed with gutter sealant generally stops the drip. A split or warped section needs replacing.
Will sealing fix a sagging gutter?
Sealing a sagging joint won’t last. A gutter installer needs to refix it, and we will tell you if that is what we find.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
Do I have to be there?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.