Kent · England
Molash Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for Molash, backed by a 12-month guarantee. Ask us for a quote.
- Dark patches showing through the sealant
- Sealant applied over old sealant that has lifted
- Wide, uneven beads that look worse than the old ones
Keeping the joints in good condition
So the new joints stay in good condition:
- Check ceilings under showers for marks
- Don’t wait for a small gap to become a leak
- Find out why the sealant failed first
- Air the bathroom so the sealant can dry
Keep the room ventilated: run the fan during and after showers, or open a window.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into whatever is behind or below. Early action keeps it to a sealant job.
Remedial sealant in Molash, done properly
Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. We work on failed movement joints, shrunken worktop sealant and mouldy bath & shower sealant, and common reasons people get in touch are wide, uneven beads that look worse than the old ones and sealant peeling off a dusty or damp surface.
Being in a small place like Molash makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Molash (CT4)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What we do, step by step
When we arrive, we look over the joints with you first, so you know exactly what we’re doing. We protect the surfaces around the joints before we start. The work generally takes a few hours, depending on how many layers have to come out. Somewhere as small as Molash, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Mention any leaks or damp you’ve noticed
- Tell us if parking is tricky
Getting a quote
For remedial sealant in Molash, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Read more
Surface by surface
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed.
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. Once it’s all removed, the joint is treated.
Nearby places to Molash
More services for Molash
What affects the cost of remedial sealant
For a quick quote, just ask. What matters most is:
- The old material and how stubborn it is
- Whether there’s mould to deal with
- The product the joint needs
- The number of rooms or windows
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
What to tell us for a quote
When you call or email, these details help:
- Where the property is
- If someone has resealed it before
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand.
Landlords, agents and businesses in Molash
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Molash questions
I let a flat near Wye station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Molash?
Yes. Molash is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What if resealing will not fix my leak?
We check for that before we reseal. If the fault is elsewhere, you’ll know before any work is done.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Do you work for hotels and businesses?
Yes. We’ve worked for hotels, offices and other businesses, and we’re fully insured.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. For most joints, it’s a few hours.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Remedial sealant in Molash: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Wye station, a joint that keeps failing is best fixed properly while the property is empty. If you live in an older home near Church of St Peter, older homes can move a little, which is hard on rigid grout and tired sealant.
Molash is about 6 miles south of Faversham, in Kent. Homes, rented property, offices and hotels in Molash is covered for remedial sealant, old or new, large or small. Every job comes with our one-year guarantee. Molash is one of 922 towns and villages in Kent we cover. There’s also a page for Chelmsford, roughly 39 miles from Molash.
All of CT4 is within our area for remedial sealant. We cover properties on The Street, Pound Lane and Church Lane and the roads around them. We also cover the places around Molash: Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). Larger places within reach include Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
Near you in Molash
In Molash, that means homes and buildings near George Inn. Molash’s nearest station is Wye station, roughly 3.2 miles south of the centre. Well-known places in the area include Tower keep castle at Chilham (2.7 miles east).
Why deal with it now?
Adding more sealant is the usual quick fix, and it rarely works. It doesn’t grip the old layer, so the leak carries on and there’s now more to remove. In a small place like Molash, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Doing several joints on one visit generally makes better use of the time than several visits. We’ll give you a clear price for the lot.
Why Molash clients choose us
- A sealant colour to suit the surroundings
- Full insurance on every job
- Over 20 years’ experience
- Anti-fungal sanitary silicone in wet areas
Take a look at our cost guide and what customers say.