Kent · England
Glazing & conservatory sealant in Molash, Kent
Glazing silicone for Molash and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Failed sealant around rooflight glass
- Drips on the inside of a conservatory window
- Water escaping where a screen meets the wall
Common questions in Molash
Is Molash within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Wye station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
How long will you be here?
Typically it takes a few hours, depending on how many joints need doing. Bigger jobs take longer, and we will say how long yours will take.
Can you reseal the base of a glass balustrade?
Yes, we reseal the joint at the base channel. Fitting glass is a separate trade.
Can you reseal a frameless shower screen?
Yes. We remove the old sealant and reseal the wall and tray joints.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Can you do several jobs on one visit?
Of course. Doing several areas at once is normally more efficient.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
How we handle glazing silicone in Molash
Glass, frames and walls all move at different rates, and the silicone between them takes the strain. When it cracks or lets go, water gets in. We replace it with a glazing silicone that suits the glass and frame. Typical jobs include water getting into a conservatory at the joints and split or lifting silicone on glass, across shower screens, glass-to-frame joints and glass balustrade bases.
Mastic can only go onto a dry, clean joint, so window work in Molash is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.
Each job carries a 12-month guarantee.
- Where
- Molash (CT4)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the cost of glazing silicone
There’s no set price list. What we look at:
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- Whether there’s mould to deal with
- The number and length of the joints
What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before work begins.
What we need to know
Photos help, but a description is a good start. Please mention:
- Where the job is, and your postcode
- Pictures of the joints, sent by email
- Whether it has been sealed before
- The problem you’ve noticed
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we will come back to you with a quote.
What the job involves on each surface
Glass balustrade bases
Balustrade bases are exposed outdoors. A sound sealant joint keeps them tidy and dry.
Glass-to-frame joints
The sealant must stick to glass and frame alike. We choose a product that suits both.
What we are called out for in Molash
New silicone over old silicone won’t bond. Many failed joints we see have been topped up rather than cut out leaving a path for water.
Look out for these signs:
- Silicone pulling away from the glass
- Water getting into a conservatory at the joints
- Leaking glazing joints on a rooflight
- Mouldy sealant around glass panels
Homes close to Church of St Peter include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Comparing quotes
- Whether all the old sealant comes out first
- Whether VAT is included
- How much experience the applicator has
- How long the guarantee is
Should I try it myself first?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Nearby places to Molash
Other services in Molash
Molash homes and the weather
With historic houses such as Belmont House and Gardens (about 3.8 miles north-west) nearby, there’s older building stock in the area around Molash as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For landlords with property near Wye station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Molash is about 6 miles south of Faversham, in Kent. Whether you’re in the middle of Molash or further out, we cover glazing silicone for every kind of property. We cover 922 towns and villages across Kent, large and small. For nearby work, see our Chelmsford page (39 miles or so).
We work across the CT4 postcode area for glazing silicone and the streets around it. If you need glazing silicone at a property on The Street, Pound Lane and Church Lane or a nearby road, our applicators can take on the job. Close by, we work in Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). Within a short drive, we also cover Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
What’s near Molash
Locally, jobs take us to homes and businesses close to George Inn and the streets around them. The closest station to Molash is Wye station, about 3.2 miles south of the centre. Nearby you’ll also find Tower keep castle at Chilham (2.7 miles east).
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Keep air moving in the conservatory
- Avoid scraping close to the bead
- Check the gutters above the glazing for debris
- Wipe the screen down after showering
Keep conservatory gutters clear so water doesn’t back up against the seals. Overflowing gutters can cause leaks of their own.
A small conservatory leak soon spreads. Water runs along frames and down walls, so get it looked at when you first see it.
Work for landlords, hotels and businesses
We work for letting agents and landlords as well as homeowners. Resealing between tenancies keeps a property looking cared for.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
What we do, step by step
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. Expect the work to take a few hours, depending on how many joints need doing, and we tell you how long to leave it before we go. For a village or hamlet like Molash, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we agree the joints to be done.
- We cut away the failed silicone.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- The joints are checked before we leave.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- For indoor joints, keep the area dry beforehand if you can
- Let us know about parking restrictions
Getting a quote
Need a quote? Please call 0345 464 0079 or email us with a few details. We will explain what we’d do and give you a clear price before we start.