Kent · England
Regrouting in Molash
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Molash, with a 12-month guarantee on every job. Ask us for a quote.
- Grout washed out of a shower
- Splashback grout that has darkened
- Good tiles let down by tired grout
About our regrouting in Molash
Our applicators rake out the old grout to an even depth, without damaging the edges of the tiles. The joints are then vacuumed, regrouted and cleaned off, and the corners get fresh silicone. Typical jobs include old grout in a dated colour and floor grout that has worn and darkened, on shower walls, tiled floors and kitchen splashbacks.
Homes around Molash are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Molash (CT4)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How the job changes by surface
Wet rooms
Regrouting a wet room helps keep water on the surface of the tiles. It can’t fix waterproofing below the tiles.
Bathroom floors
Regrouting a floor brightens the whole room. Floor-to-wall and bath joints are sealed, not grouted.
Your questions about regrouting in Molash
Do you work for landlords with property near Wye station?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
Is Molash within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or drop us an email.
What goes in the corners, grout or silicone?
Flexible sealant. Grout belongs between the tiles, while corners and edges need a joint that can move.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
How soon can the shower be used after regrouting?
Before we leave, we’ll tell you how long to wait. The grout and sealant both need to cure before the shower is used.
Molash homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Wye station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Molash is about 6 miles south of Faversham, in Kent. Every kind of property in Molash can book us for regrouting. The work is guaranteed for a year. Across Kent, we cover 922 places, Molash among them. You can also see our page for Chelmsford, roughly 39 miles from Molash.
All of CT4 is within our area for regrouting, from the main roads to the quietest streets. Regrouting is available to properties on The Street, Pound Lane and Church Lane and the roads around them. We also cover the places around Molash: Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). Within a short drive, we also cover Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
Near you in Molash
Around Molash, our work takes us to homes and buildings near George Inn. The closest station to Molash is Wye station, about 3.2 miles south of the centre. A little further out are Tower keep castle at Chilham (2.7 miles east).
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Give the walls a quick rinse after use
- Keep an eye on the silicone along the edges
- Use a soft brush rather than a wire one
- Use gentle cleaners on grout
Wipe the tiles down after a shower keeps water off the grout. Ventilate the room well so the grout dries between uses.
Once grout cracks, it tends to get worse. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.
Can I do it myself?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Why act early in Molash
Regrouting keeps the tiles you already have. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and often a few days without a shower. If the tiles are sound, regrouting is the simpler fix. Around Molash, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- 4.9 on Google from 180+ five-star reviews
- Quality sealants from Arbo and Everbuild
- We leave the area clean and tidy
- ARBOMaster approved applicator
Read what affects the cost and customer reviews.
What happens on the day
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes anything from a few hours to a full day, depending on the area. Somewhere like Molash needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We check the tiles are sound and flag any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- We reseal the internal corners and edges with silicone.
Getting ready for the visit
- Mention if the joints have been sealed before
- Mention any parking rules near the property
- Mention any sign-in or site rules at work premises
Get a quote
Want a quote for regrouting? Please ring 0345 464 0079 or email us with a few details. We will explain what we’d do and send you a clear quote before we start.
Related advice
What sealant work can’t fix
Before you book, it’s worth knowing the limits too:
- Failed tanking or waterproofing under the tiles
- Tiles that are chipped or split
- Water coming from plumbing rather than grout
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.
Where we work in Molash
- Bathroom floors
- Tiled floors
- Wet rooms
- Bathroom wall tiles
- Shower walls
- Kitchen splashbacks
Places near Molash
More services for Molash
Common problems we fix in Molash
Soap scum and limescale build up on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.
The problems people normally mention when they call are:
- Shower grout that has worn away
- Grout in a colour the owner wants to change
- Grout that is cracking and breaking up
- Stained grout that cleaning won’t shift
Homes close to Church of St Peter include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- How the colour is chosen
- Whether the sealant suits the joint
- What insurance they hold
- What happens if the job turns out different