Kent · England
Commercial Sealant in Molash
Commercial sealant across Molash and nearby, with old sealant always removed completely.
- Rental bathrooms that need resealing between tenants
- Mouldy washroom sealant that staff and guests notice
- Split sealant around staff kitchen worktops and sinks
Commercial sealant in Molash, done properly
For a rental portfolio, resealing between tenants keeps bathrooms and kitchens presentable. Several addresses can be quoted together to keep things simple. Common call-outs are for too many rooms to reseal without closing the building and silicone laid over old silicone by a previous contractor, on office washrooms & kitchens, hotel bathrooms and rental portfolios.
For holiday lets, converted business premises or a community building near Molash, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
All of our work is guaranteed for twelve months.
- Location
- Molash (CT4)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
What happens if it’s left?
Sealant is easy to forget until an audit or inspection is due. Planning the work ahead means rooms are finished and cured in time. Around Molash, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Why choose Mr Mastic in Molash
- Quality sealants from Arbo and Everbuild
- 4.9 on Google from 180+ five-star reviews
- We’re fully insured
- Every job guaranteed for a year
Take a look at what affects the cost or what customers say.
Common problems we fix in Molash
A hotel shower or office washroom is used many times a day, and they’re cleaned with strong products every day. So the silicone ages faster than it would at home.
Keep an eye out for these signs:
- Mouldy washroom sealant that staff and guests notice
- Tired sealant ahead of a health and safety audit
- Water marks on ceilings under bathrooms
- Sealant failing again soon after quick repairs
Community buildings like Church of St Peter are part of the picture too: halls and community kitchens see heavy use, and their sealant shows it.
Questions to ask before you book
- How the surfaces are prepared before sealing
- What the quote includes, VAT included or not
- Whether all the old sealant comes out first
- Whether you can choose the colour
When it isn’t the sealant
In fairness, there are a few things sealant won’t fix:
- Leaking pipework, valves or wastes (a plumber’s job)
- A broken extractor fan behind the mould problem
- Cracked trays or baths rather than failed joints
If you are not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Retail & leisure sites
- Rental portfolios
- Office washrooms & kitchens
- Welfare facilities
- Hotel bathrooms
- Student & care accommodation
Places near Molash
Other services in Molash
Commercial buildings in Molash
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Wye station change hands often, and we can quote for one property or a whole portfolio of rentals.
Molash is about 6 miles south of Faversham, in Kent. Jobs in Molash get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Molash is one of 922 towns and villages in Kent we cover. Our Chelmsford page covers work nearby.
Work in CT4 is quoted and booked the same way as anywhere else. Local streets include The Street, Pound Lane and Church Lane, and we cover them all. Neighbouring places we cover for commercial sealant include Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). We also work in nearby towns such as Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
What’s near Molash
Typical jobs here are in homes near George Inn and the streets around them. For rail, the closest station is Wye station, roughly 3.2 miles south of the centre. Nearby you will also find Tower keep castle at Chilham (2.7 miles east).
How to look after the new joints
So the new joints stay in good condition:
- Keep strong chemicals and scourers off the joints
- Act on lifting sealant before it leaks
- Give housekeeping the cure time for every room
- Report broken fans quickly
Each room is handed back with its cure time, which is generally around 24 hours. Make sure housekeeping or cleaning staff know it so nobody showers or cleans the joint too early.
Mould in shared washrooms gets noticed and talked about. The longer it’s left, the deeper it grows into the silicone, so the fix is replacement.
How the visit works
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. The job normally takes anything from a few hours to several days, depending on the number of rooms, and we tell you how long to leave it before we go. In a small place like Molash, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The first visit is a look round the site to agree the scope.
- We agree when we’ll work, with early or out-of-hours slots where they can be arranged.
- Each area is protected and stripped of old sealant.
- Once dry, every joint is resealed and tooled.
- We let your team know the cure time for every area.
Before we arrive
- Tell us about any water getting in
- Let us know about parking restrictions
- Clear items away from the joints we’re working on
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Related advice
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
If you manage several properties in or around Molash, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Molash questions
I let a flat near Wye station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Is Molash within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Is commercial work guaranteed?
Yes, for 12 months. Mild cleaning and good ventilation help it last.
When can guests or staff use the shower again?
Normally after around 24 hours. Each room is handed back with the cure time for the product used.
Can you quote for more than one area?
Yes. Just list everything you need.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you take on large, multi-room jobs?
Yes. After a site walk, we agree the scope and sequence, and give you one clear quote.