Kent · England
Faversham Commercial Sealant
Washrooms, bathrooms and kitchens in Faversham need attention? We remove the old material, prepare the joints and seal them properly.
- Repeated reseals that don’t last
- Shower leaks reaching the floor below
- Mouldy bathrooms flagged at a tenancy check
Commercial sealant for homes and businesses in Faversham
For a rental portfolio, resealing between tenants keeps bathrooms and kitchens presentable. We can quote for several properties at once to keep things simple. Common call-outs are for too many rooms to reseal without closing the building and silicone laid over old silicone by a previous contractor, on rental portfolios, welfare facilities and retail & leisure sites.
Washrooms in busy buildings wear their sealant out faster than a bathroom at home, while fire-rated sealant has to be made good whenever new pipes or cables go through. For a building in Faversham, we plan timings around how it’s used.
All our work comes with a 12-month guarantee, wherever you are in Kent.
- Place
- Faversham (ME13)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Commercial buildings in Faversham
For seaside hotels, guest houses and holiday lets around Faversham, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Faversham station, several rental properties can be resealed on one programme. For buildings such as Church of St Mary Magdalene, its kitchen and washroom sealant needs looking after like anywhere else.
Faversham is about 9 miles west of Canterbury, in Kent. Across the ME13 area, we cover commercial sealant for homes and businesses. 922 places in Kent are on our list, large and small. There’s also a page for Chelmsford, roughly 34 miles from Faversham.
We work across ME13 for commercial sealant and the streets around it. Whether your property is on Bedlington Square, Market Place and Market Street or a nearby road, we can help. Being close to the A2 and A251, Faversham is simple for us to get to. Other places close to Faversham include Davington (1 mile north-west), The Brents (1 mile north-east), Preston (1 mile south-east), Ospringe (1 mile south-west) and Whitehill (1 mile south-west). Further out, we also cover Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (7 miles west), Whitstable (7 miles east), Herne Bay (11 miles east) and Minster (8 miles north-west).
What’s near Faversham
Around Faversham, our work takes us to homes and buildings near Mechanics Arms, Queen Elizabeth's Grammar School and Oare Meadow. There’s a railway station in Faversham itself: Faversham station. Nearby you will also find Newnham Castle (4.2 miles south-west).
Towns and villages near Faversham
More services for Faversham
Landlord and commercial work in Faversham
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Do you need commercial sealant in Faversham?
A hotel shower or office washroom is used many times a day, and they’re cleaned with strong products every day. So the silicone ages faster than it would at home.
The problems people usually mention when they call are:
- Failed floor-level joints in accessible wet rooms
- Washroom sealant that looks dirty however often it’s cleaned
- Too many rooms to reseal without closing the building
- Sealant failing again soon after quick repairs
If you look after a building such as Ethelbert Road Primary School, sealant in washrooms, kitchens and changing areas can be renewed around term times or opening hours.
What your quote should include
- Which sealant they’ll use, and why
- How long the guarantee is
- How the colour is chosen
- How the joint is cleaned and prepared
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Check extract fans are actually running
- Leave squeegees in busy showers
- Log resealing so you know what’s due
- Keep strong chemicals and scourers off the joints
Add sealant checks to your planned maintenance. A quick look at each bathroom when rooms are checked spots problems early.
Signs to look for: mould, splits, peeling corners or water marks downstairs. When you see them, it’s time to plan a reseal.
Different surfaces, different methods
Welfare facilities
Busy staff showers wear sealant out quickly. Anti-fungal sanitary silicone is used throughout, accessible showers included.
Student & care accommodation
Halls and care homes often have many near-identical bathrooms. A room-by-room programme keeps the job efficient.
What happens if it’s left?
Sealant work is quick by the room: the job takes a few hours per room, so whole buildings are phased. After that, each area needs its cure time before use, so planning the order matters more than the hours on site. Gaps in sealant and mould in the bead never get better on their own, and in a busy household in Faversham they spread with every shower and every downpour. Now is the easy time to put it right.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Why choose Mr Mastic in Faversham
- Homes, businesses and hotels
- We never seal over old sealant
- A 12-month guarantee on all work
- Neat joints and a tidy finish
Read what affects the cost and what customers say.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
What we do, step by step
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours for a single washroom, longer for a whole building, depending on the size of the job. A visit in Faversham needs access to the work and a place to park close by. For outside work, let us know about side access, gates and any upper-floor joints.
- We walk the site with you and agree the rooms, the order and the hours.
- Room by room, we protect the area and remove all the old sealant.
- Joints are cleaned, treated for mould and dried.
- We lay the right sealant for each area, with anti-fungal silicone in wet rooms.
- Each room is checked and handed back with its cure time.
Preparing for the visit
- Keep children and pets away from the work area
- Mention any parking rules near the property
- Clear the area around the work
Get a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
Related advice
FAQs for Faversham
Do you take on hotel work around Faversham?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can you help a landlord with a rental near Faversham station?
Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Can you supply method statements and risk assessments?
We are fully insured, and we will go through your site’s requirements with you. We’ll confirm what we can supply when we quote.
Will the old sealant be removed?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available for many products, and we will agree it with you first.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Do you come to Faversham?
Yes. We’re based in Crawley and work across South East England, London and Scotland, Faversham included.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we’re done.