Perth and Kinross · Scotland
Bathroom & kitchen resealing in Kenmore, Perth and Kinross
Professional bathroom resealing in and around Kenmore, with every bit of old sealant taken out first and a 12-month guarantee.
- Water escaping at the shower enclosure
- Lumpy, uneven sealant from a DIY attempt
- Two layers of silicone, both failing
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Wipe up water along the back of the worktop
- Keep bottles off the sealant line
- Never pick at the silicone with a blade
- Clean with a mild bathroom cleaner and a soft cloth
Have a look at the joints every few months. Small splits and lifting ends are easy to catch early, and if anything looks wrong, just send an email to info@mrmastic.co.uk.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually will not remove it. Catching it early keeps it a simple reseal.
Bathroom resealing for homes and businesses in Kenmore
A shower joint gets soaked every day. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. Common call-outs are for damp behind the bath or under the tray and a reseal done over the top of the old bead, across kitchen worktops & upstands, shower trays & enclosures and baths.
In and around a place like Kenmore, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Place
- Kenmore (PH15)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How the job changes by surface
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.
Wet rooms
A wet room floor and its walls can move independently, so the internal corners need silicone rather than grout. Cracked grout in a corner can be cut out and replaced with silicone.
Why deal with it now?
A clean new bead makes a room look cared for, which matters if you are letting a property or selling it. Lumpy sealant with smears on the tiles has the opposite effect. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.
Why book with us
- 20+ years of sealant experience
- Domestic, commercial and hotel work
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
Common problems we fix in Kenmore
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
Most people get in touch when they notice one of these:
- Gaps where the bath or tray has moved
- Failed sealant on the screen profile
- Black mould in the silicone that will not clean off
- New sealant laid over old sealant that is now lifting
For jobs in and around Kenmore, choosing the right material for each joint is as important as a tidy finish.
Questions to ask before you book
- The length of the guarantee
- How much experience the applicator has
- Which sealant they’ll use, and why
- Which colour the sealant will be
Bathroom resealing in Kenmore: local notes
There are hotels and other places to stay in and around Kenmore. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
In and around Kenmore, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. Every kind of property in Kenmore is covered for bathroom resealing. Every job comes with our 12-month guarantee. 107 places in Perth and Kinross are on our list, large and small. There’s also a page for Dundee, roughly 40 miles from Kenmore.
Every address in PH15 is covered for bathroom resealing, from the main roads to the quietest streets. Local streets include The Square, Taymouth Drive and Pier Road, all of which we cover. Close by, we work in Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Landmarks near Kenmore
Nearby you’ll also find Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (less than half a mile north). For a walk, there’s Drummond Hill.
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen in most cases. Outdoor work around Kenmore depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, generally around 24 hours.
How to prepare
- Let us know about parking restrictions
- Mention if the joints have been sealed before
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Read more
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
We work for landlords and agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Nearby places to Kenmore
More services for Kenmore
Kenmore: your questions answered
Do you work for hotels and guest houses in Kenmore?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can you do bathroom resealing in Kenmore?
Yes, Kenmore is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How long will the resealing take?
One bath or shower is around two hours’ work, old sealant removal included. A full bathroom and kitchen can take most of a day.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme.
How do I get a quote for bathroom resealing in Kenmore?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.