Perth and Kinross · Scotland
Gutter, fascia & soffit sealing in Kenmore, Perth and Kinross
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Kenmore, backed by a one-year guarantee. Call for a quick quote.
- Water dripping where gutter sections meet
- Cracked sealant along roofline trims
- Open joints in fascias and soffits
How we handle gutter sealing in Kenmore
It’s easy to live with a dripping gutter joint, but each shower sends water to the same place. Resealing it is a small job if the gutter is otherwise in good order. We’re often asked to deal with old sealant on roofline trims that has split and internal damp traced to a gutter joint, on soffit joints, uPVC fascias and gutter end caps.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Kenmore (PH15)
- Region
- Perth and Kinross
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Outside joints around Kenmore
Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
Whether the job is in Kenmore itself or nearby, the right material for each joint matters as much as a neat finish. Around Kenmore, as everywhere, gutter sealing is only as good as the preparation behind it.
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. Anywhere in PH15, our applicators can take on gutter sealing. Our Perth and Kinross coverage runs to 107 places, and Kenmore is one of them. Our Dundee page covers work nearby (40 miles or so).
Work in PH15 works the same way as everywhere else we cover. If you need gutter sealing at a property on The Square, Taymouth Drive and Pier Road or a nearby road, our applicators can take on the job. We also cover Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Local landmarks in Kenmore
Nearby you will also find Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (within half a mile north). Open spaces near Kenmore include Drummond Hill.
What happens if it’s left?
You don’t need new fascias just because the joints have opened. A neat seal closes the gaps if the boards are sound. In a place like Kenmore, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Why choose Mr Mastic in Kenmore
- Domestic, commercial and hotel work
- Anti-fungal silicone where joints get wet
- 4.9 on Google from 180+ five-star reviews
- A sealant colour to suit the surroundings
Read what affects the cost or customer reviews.
How we quote for gutter sealing
The price is agreed before any work begins. It takes into account:
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
- How many areas need sealing
- Any working-time requirements on site
Combining jobs into one visit is normally more efficient than separate visits. We will give you a clear price for the lot.
What to tell us for a quote
You do not need to know the technical terms. Just tell us:
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- If someone has resealed it before
Want a quote for gutter sealing? Please send an email to info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and give you a clear price before work begins.
Your questions about gutter sealing in Kenmore
Is Kenmore in your area for gutter sealing?
Yes, Kenmore is within the area we cover. Our work covers the whole of Scotland. You can send an email to info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.
Is Kenmore within the area you cover?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.
Are you fully insured?
Yes. We are fully insured.
How long before the joint can be used?
Different products cure at different speeds, so please follow the time we give you.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so the joint is cleaned back first.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.
How it works
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes anything from an hour or two to a few hours. Somewhere like Kenmore may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we trace the drip and check the gutter is not damaged.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Tell us if parking is tricky
- Clear items away from the joints we’re working on
Getting a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved.
Read more
Towns and villages near Kenmore
More services for Kenmore
When it is not the sealant
It helps to know what we cannot do:
- Brackets that have snapped or loosened
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Fascias that need replacing
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before you book.
Surfaces we seal
- Soffit joints
- Garage door frames
- Roofline trims
- uPVC fascias
- Gutter joints
- Gutter end caps
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Check fascia and soffit joints for gaps
- Deal with a drip before winter
- Keep an eye out for wet patches below a joint
- Keep ladders off the guttering
Keep downpipes clear, so water can get away. Blockages push water back along the gutter.
If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches.
Landlords, agents and businesses in Kenmore
We also work for property managers and facilities teams in Kenmore and across Perth and Kinross. Several sites can go on one quote, and we’re fully insured.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.