Perth and Kinross · Scotland
Gutter, fascia & soffit sealing in Perth, Perth and Kinross
Gutter sealing in Perth from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Water dripping where gutter sections meet
- Trim joints where the sealant has failed
- Old gutter sealant that has let go
About our gutter sealing in Perth
Gaps along uPVC fascias and soffits look untidy and can let in water and draughts. We seal them in a colour to suit where one is available. If you are dealing with old sealant on roofline trims that has split and internal damp traced to a gutter joint, we can put it right, on garage door frames, uPVC fascias and gutter end caps alike.
Scottish towns like Perth mix older stone buildings with newer estates of brick, render and uPVC trims. Older buildings tend to leak at gutter joints, newer ones at dried-out movement joints.
All of our work is guaranteed for twelve months.
- Place
- Perth (PH1, PH2)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Walls and rooflines in Perth
Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that. Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex.
If you let a flat or house near Perth station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Perth is about 33 miles north of Edinburgh, in Perth and Kinross. Homes, rented property, offices and hotels in Perth can book us for gutter sealing, old or new, large or small. The work is guaranteed for a year. Our area takes in 107 places across Perth and Kinross, from the larger towns to small villages. For nearby work, see our Dundee page.
Here we cover the PH1 and PH2 postcode area for gutter sealing. Streets in the area include Simpson Square, High Street and Moredun Square, all of which we cover. Perth sits on or near the A9 and A85, which makes travel easy. Nearby, we also carry out gutter sealing in Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). Within a short drive, we also cover Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). As one of the bigger places in Perth and Kinross, Perth has homes, rented property and businesses of every kind.
Near you in Perth
Typical jobs here are in homes near North Inch, Public House and St John's Academy, among other places. Perth’s nearest station is Perth station, roughly 0.7 miles south-east. Other landmarks nearby include Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). The countryside around Perth includes St Magdalene's Hill.
Aftercare tips
Looking after new joints is easy:
- Keep ladders off the guttering
- Keep the gutters clear of debris
- Have sagging gutters refixed early
- Look along the fascias for open joints
If a gutter starts to sag, get the brackets looked at. Movement will pull the joints open again.
A leaking garage frame lets water reach stored items. A reseal sorts it.
Other services in Perth
How we quote for gutter sealing
The quote reflects the job in front of us. We look at:
- Mould in or behind the old joints
- The size of the job
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
What to tell us for a quote
Before you ask for a quote, have a think about:
- The rough size of the job
- The problem you’ve noticed
- Any access issues, like height or stairs
- Where the job is, and your postcode
For gutter sealing in Perth, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
For anyone letting property in or around Perth, several properties can go on one quote. Send us the addresses and the work at each.
What we are called out for in Perth
Sealant on fascias and trims weathers like any outdoor joint. It goes hard, cracks and pulls away after some years.
Most people get in touch when they notice one of these:
- Damp on an inside wall under a dripping gutter
- Quick sealant fixes on gutters that didn’t last
- Dripping gutter ends
- Gaps along fascia and soffit joints
Managing a site like Perth High School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
What to look for in a quote
- Whether VAT is included
- Which sealant they’ll use, and why
- Whether they’re fully insured
- What happens if they find a problem under the old sealant
FAQs for Perth
Is gutter sealing in Perth guaranteed?
All our work, in Perth and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Do you work for landlords with property near Perth station?
Yes, we work for landlords and agents. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before work begins.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you come to Perth?
Yes, we do. Perth is part of the area we cover, and the service is the same as everywhere else.
Can you seal fascia and soffit joints?
Yes. Open joints along uPVC fascias and soffits can be sealed in a matching colour.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
What about gutters on a second or third storey?
That depends on the building. Let us know the height and the ground below and we’ll confirm what’s needed.
Do you clean gutters?
We clean the joints we’re sealing and any debris nearby is cleared. A full gutter clean is a separate service.
How the job changes by surface
Garage door frames
Resealing a garage door frame keeps rain and draughts out.
Roofline trims
Trim joints are cut out and resealed.
What happens on the day
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it usually takes anything from an hour or two to a few hours. In a Scottish town like Perth, parking is normally straightforward, though older centres can be tighter. For flats, mention the shared stair or door entry system.
- We look at the gutters, fascias and trims and agree the joints to seal.
- We clean out each joint.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
How to prepare
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, send an email to info@mrmastic.co.uk.
Read more
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.