Perth and Kinross · Scotland
Gutter Sealing in Blairgowrie and Rattray
Specialist gutter sealing for Blairgowrie and Rattray: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Trim joints where the sealant has failed
- Internal damp traced to a gutter joint
- Open joints in fascias and soffits
How we handle gutter sealing in Blairgowrie and Rattray
Across Blairgowrie and Rattray, we reseal gutter joints, end caps and roofline trims. Single-storey and low gutters are simple to reach, and for higher work, tell us about access and we’ll confirm what’s needed. We work on uPVC fascias, garage door frames and gutter end caps, and people most often call us about garage door frames letting rain in and water running down the wall below the gutter.
In a town like Blairgowrie and Rattray, older stone-built streets sit alongside newer estates with brick, render and uPVC rooflines. Older buildings tend to leak at gutter joints, newer ones at dried-out movement joints.
Your job is guaranteed for a year, as with all our work.
- Where
- Blairgowrie and Rattray (PH10)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Signs you need gutter sealing in Blairgowrie and Rattray
Sagging sections pull joints apart. Sealing will not hold if the gutter keeps dropping so the brackets need attention first.
Look out for these signs:
- Water running down the wall below the gutter
- Rain getting in around a garage door
- Damp patches inside below a leaking gutter
- Quick sealant fixes on gutters that didn’t last
Around Blairgowrie and Rattray, as everywhere, gutter sealing is only as good as the preparation behind it.
What to look for in a quote
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
- What the cure time is
- Are they insured?
What we do, step by step
The work is kept neat and contained to the area we’re working on. Expect the work to take an hour or two for a few joints, longer for a full run, and we tell you how long to leave it before we go. For a job in Blairgowrie and Rattray, tell us where the work is, how to get in and where to park. Outside work depends on the weather, as sealant needs a dry surface.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Getting ready for the visit
- Keep children and pets away from the work area
- Move anything stored near the joints
- Try not to wet indoor joints just before the visit
Ask for a quote
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.
Related advice
Honest limits
To be straight with you, some problems need a different trade:
- Cracked, split or warped gutter sections
- Boards that have decayed or split
- Downpipes that are blocked or broken
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Gutter end caps
- uPVC fascias
- Gutter joints
- Garage door frames
- Roofline trims
- Soffit joints
What the job involves on each surface
Roofline trims
Trims along the roofline are often finished with sealant. When it splits, water can get behind.
Gutter end caps
We seal end caps from the inside where we can reach, after cleaning and drying.
Also in Blairgowrie and Rattray
Blairgowrie and Rattray questions
What’s the best way to get a price for gutter sealing in Blairgowrie and Rattray?
Just send an email to info@mrmastic.co.uk and tell us what needs doing and where. We’ll give you a clear price, with a fixed price before any work starts.
Is there a guarantee on gutter sealing in Blairgowrie and Rattray?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is sealant enough for a gutter that has dropped?
No. A sagging gutter pulls its joints apart so it needs refixing before sealing.
Do you offer different sealant colours?
Most of the time, yes. We will explain which colours are available and agree one before we start.
What about gutters on a second or third storey?
Low-level work is easiest. We’ll confirm the access for higher gutters once we know more.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we’re using and why.
Blairgowrie and Rattray buildings and the weather
Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
If you look after a building such as Blairgowrie High School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Blairgowrie and Rattray is about 14 miles north of Perth, in Perth and Kinross. Wherever you are in the PH10 postcode area, we cover gutter sealing for homes and businesses. Across Perth and Kinross, we cover 107 places, Blairgowrie and Rattray among them. We also work in Dundee, about 16 miles from Blairgowrie and Rattray.
Every address in PH10 is covered for gutter sealing. Streets in the area include High Street, Mitchell Square and Back Brae, all of which we cover. Main roads around Blairgowrie and Rattray include the A93 and A923, so getting to you is simple. If you are just outside Blairgowrie and Rattray, we cover Rattray (1 mile north-east), Carsie (2 miles south), Kinloch (2 miles west), Meikleour (4 miles south) and Coupar Angus (4 miles south-east). Within a short drive, we also cover Perth (14 miles south), Letham (14 miles south), Scone (12 miles south), Tulloch (13 miles south), Alyth (5 miles north-east) and Oakbank (15 miles south). Blairgowrie and Rattray is among the bigger towns we cover in Perth and Kinross.
What’s near Blairgowrie and Rattray
In Blairgowrie and Rattray, that means homes and buildings near The Ericht Ale House. A little further out are Lethendy House (3.2 miles south-west) and Blairgowrie Community Hospital (within half a mile south-west). Not far away are Rae Loch and Hill of Alyth.
What affects the cost of gutter sealing
Jobs vary more than people expect. What affects the quote:
- The number and length of the joints
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
- Which sealant suits the joint
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- Any access issues, like height or stairs
- What’s wrong with the joints now
- The type of property
- If someone has resealed it before
Every job is quoted individually. Just drop us a line at info@mrmastic.co.uk with the details.
Why act early in Blairgowrie and Rattray
Sealant will not clear a blocked downpipe. We look at what’s really happening and tell you if something else is needed. Private landlords in a town like Blairgowrie and Rattray must keep homes wind and watertight under the Repairing Standard. Sorting failed joints early is easier than dealing with a tenant’s complaint.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Call for a quick quote and we’ll go through it with you.
Why choose Mr Mastic in Blairgowrie and Rattray
- Fully insured
- Arbo and Everbuild products
- Sealant colour chosen to suit
- White, clear, grey or coloured to suit, where the product allows
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.