Perth and Kinross · Scotland
Bathroom Resealing in Boreland
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Boreland. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Mouldy sealant that has gone black
- Lumpy, uneven sealant from a DIY attempt
- A bead that has pulled away from the tiles
Bathroom resealing in Boreland, done properly
A bead that has gone black, split or come away shouldn’t be left until there’s a leak. A photo of the joints helps when you drop us a line at info@mrmastic.co.uk, and you will get a clear quote before any work starts. Common call-outs are for water getting behind the bath panel and cracked, shrunken or lifting silicone, across kitchen worktops & upstands, baths and sinks & splashbacks.
A bathroom in a place like Boreland gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Our work is backed for twelve months, in Boreland and everywhere else we cover.
- Place
- Boreland (PH15)
- Wider area
- Perth and Kinross
- Cover
- One year on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Common questions in Boreland
Will you come out to Boreland?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is there a guarantee on bathroom resealing in Boreland?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Will there be a smell?
Some sealants have a smell while they cure, but it fades. Ventilation helps.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Do you have insurance?
Yes, we are fully insured for every job we do.
Do you remove the old sealant?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
When can I use the bath or shower again?
Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or as long as we advise for that product.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. Then send an email to info@mrmastic.co.uk.
What the job involves on each surface
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, following the enclosure maker’s guidance on which side to seal.
When it isn’t the sealant
We’ll always be straight with you, so here’s what new sealant will not do:
- A tray that rocks until it’s re-bedded
- Cracks in the tray itself rather than the joint
- Damage behind the tiles that needs a tiler
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
Joints and surfaces we work on
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & upstands
- Basins & vanity units
- Sinks & splashbacks
Leave it or put it right?
The difference in a professional reseal is mostly what you do not see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead will not last. Around Boreland, water from a failed joint in an older stone home can soak into timber and plaster.
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Why us?
- Approved under the ARBOMaster scheme
- Colour picked to suit the job
- Arbo and Everbuild products
- We agree the colour with you first
Read what affects the cost or our reviews.
How the visit works
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes half a day or less for one room, longer when the kitchen is included. Outdoor work around Boreland depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
Before we arrive
- For business premises, tell us about site rules or sign-in
- For indoor joints, keep the area dry beforehand if you can
- Plan for the work area to be out of bounds to pets and children
How to get a quote
If you’re in Boreland and need bathroom resealing, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Related advice
What else we do in Boreland
How we quote for bathroom resealing
The quote reflects the job in front of us. We look at:
- Whether there’s mould to deal with
- Access and height
- How many areas need sealing
- How much old sealant there is and how hard it is to remove
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Asking for a quote
To make quoting easier, please include:
- The address or postcode of the job
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
- Whether it has been sealed before
Every job is quoted individually, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details.
Boreland homes and their sealant
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
In and around Boreland, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. Whether the job is in Boreland itself or nearby, the right material for each joint matters as much as a neat finish.
Boreland is about 17 miles north-west of Crieff, in Perth and Kinross. If you need bathroom resealing in Boreland, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We cover Perth and Kinross from our Crawley base, Boreland included. Boreland is one of 107 towns and villages in Perth and Kinross where we work for bathroom resealing. Our Dundee page covers work nearby.
Jobs for bathroom resealing in PH15 is quoted and booked the same way as anywhere else. Whether your property is on Tay Sealladh and Tigh na Loan or a nearby road, our applicators can take on the job. Other places close to Boreland include Fearnan (1 mile east), Acharn (3 miles east), Kenmore (4 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).
Around Boreland
Other landmarks nearby include Scottish Crannog Centre (3.3 miles east) and Carnbane Castle (3.2 miles north-west). Not far away are Drummond Hill and Lochan nan Uan.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Aftercare tips
So the new joints stay in good condition:
- Avoid abrasive pads on the sealant
- Stick to a soft cloth and a mild cleaner
- Dry the bead with a towel now and then
- Let new sealant cure fully before it gets wet
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.