Perth and Kinross · Scotland
Bathroom Resealing in Aberfeldy
Specialist bathroom resealing for Aberfeldy: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- New sealant laid over old sealant that is now lifting
- Damp behind the bath or under the tray
- Black mould in the silicone that will not clean off
Aberfeldy: your questions answered
Do you cover Aberfeldy for bathroom resealing?
Yes, Aberfeldy is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Do you work for hotels and guest houses in Aberfeldy?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
My sealant has gone black. Can you sort it?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Is there any odour?
Sometimes, a little. It fades as the sealant cures.
Are you fully insured?
Yes, we’re fully insured for domestic and commercial work.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Bathroom resealing in Aberfeldy, done properly
A reseal only lasts if the joint is properly prepared. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. Typical jobs include new sealant laid over old sealant that is now lifting and shrunken sealant along the back of a worktop, across basins & vanity units, sinks & splashbacks and kitchen worktops & upstands.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are generally the first signs.
There’s a 12-month guarantee on every job.
- Where
- Aberfeldy (PH15)
- Region
- Perth and Kinross
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How it works
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a couple of hours for a single bath or shower. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Mention any leaks or damp you’ve noticed
- Clear items away from the joints we are working on
Get a quote
If you are in Aberfeldy and need bathroom resealing, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before work begins.
Related advice
For landlords and businesses
We also work for property managers and facilities teams in Aberfeldy and across Perth and Kinross. We can quote a run of properties together.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Honest limits
We’ll always be straight with you, so here’s what sealant can’t fix:
- Damage behind the tiles that needs a tiler
- Water coming from the plumbing rather than the joint
- A cracked shower tray or bath (that needs repair or replacement)
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Basins & vanity units
- Baths
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
What happens if it’s left?
Tired sealant is not a reason to replace a bath or shower. A new bead often brings the whole room back. If something else is wrong, we will tell you. Around Aberfeldy, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Doing several joints on one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
Why Aberfeldy clients choose us
- Anti-fungal sanitary silicone in wet areas
- We leave the area clean and tidy
- An ARBOMaster approved applicator
- Domestic, commercial and hotel work
Read how sealant jobs are priced and our reviews.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Avoid abrasive pads on the sealant
- Dry the bead with a towel now and then
- Keep the fan on for a while after bathing
- Look for lifting corners and small gaps now and then
Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering keeps water from sitting on the joint.
Don’t wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Common problems we fix in Aberfeldy
Older sealant shrinks and hardens. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Hot pans and harsh cleaners do not help.
If you can see any of these, it’s time to have the joints looked at:
- A reseal done over the top of the old bead
- A messy, uneven bead from a previous reseal
- Gaps between the worktop and the wall
- A bead that has pulled away from the tiles
In and around Aberfeldy, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
What your quote should include
- How hidden problems are handled
- What insurance they hold
- Who turns up on the day
- Which colour the sealant will be
Bathroom resealing in Aberfeldy: local notes
Aberfeldy has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
If you look after a building such as Breadalbane Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Aberfeldy is about 20 miles west of Blairgowrie and Rattray, in Perth and Kinross. Our applicators cover bathroom resealing for homeowners, landlords and businesses in Aberfeldy and nearby. Our area takes in 107 places across Perth and Kinross, large and small. Dundee is on our list too, around 35 miles away.
Every address in PH15 is covered for bathroom resealing, from the main roads to the quietest streets. Whether your property is on Market Street, Burnside Lane and Burnside or a nearby road, our applicators can take on the job. You will find Aberfeldy on the A826 and A827, which makes it straightforward to reach with everything needed for bathroom resealing. Close by, we work in Little Ballinluig (4 miles north-east), Grandtully (4 miles north-east), Kenmore (6 miles south-west), Acharn (7 miles south-west) and Port na Craig (7 miles north-east).
Local landmarks in Aberfeldy
In Aberfeldy, that means homes and buildings near Library and Area Office, Weem Hotel and Tay Forest Park. Other landmarks nearby include Weem Castle (0.9 miles north-west). For a walk, there’s Farragon Hill and Loch Glassie.
Places near Aberfeldy
Other services in Aberfeldy
How we quote for bathroom resealing
You will get a clear quote before work begins. It’s based on:
- How many rooms, windows or areas are involved
- Access and height
- Any mould that needs treating
- Working hours on commercial sites
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
- The type of property
- Access, such as stairs, a lift or height
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.