Perth and Kinross · Scotland
Grandtully Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing in Grandtully, with a 12-month guarantee on every job. Call for a quick quote.
- A joint torn by a bath that flexes
- Failed sealant on the screen profile
- A bead that has pulled away from the tiles
Bathroom resealing for homes and businesses in Grandtully
Homes in Grandtully have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We work on basins & vanity units, shower trays & enclosures and wet rooms, and people most often call us about water getting behind the kitchen upstand and mouldy sealant that has gone black.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
You are covered for a year from the day we finish. If anything is not right with it, email us at info@mrmastic.co.uk.
- Place
- Grandtully (PH15, PH9)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What affects the cost of bathroom resealing
Every job gets its own quote. These are the things that affect it:
- Whether there’s mould to deal with
- How many areas need sealing
- Whether old sealant or filler has to be cut out
- The size of the job
The cost depends on how much there is to do, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
To make quoting easier, let us know:
- The problem you’ve noticed
- Any access issues, like height or stairs
- Where the property is
- If it’s domestic, commercial or a hotel
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, send an email to info@mrmastic.co.uk.
How the visit works
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and clear up. It normally takes two to three hours for a typical bath, depending on how much old sealant there is. Outside jobs in Grandtully need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Mention any tricky access
- Let us know about earlier repairs to the joints
Get a quote
We quote each job on its own, so start by telling us what you need. Just send an email to info@mrmastic.co.uk with the details, and pictures are welcome.
Read more
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- A cracked shower tray or bath (that needs repair or replacement)
- Movement from a bath with loose feet or no proper support
- Water coming from the plumbing rather than the joint
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before you book.
What we seal
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
FAQs for Grandtully
Do you work for landlords with property near Pitlochry station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
Is Grandtully in your area for bathroom resealing?
Yes. We work across all of Scotland, and Grandtully is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear price.
Can you just seal over the old silicone?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
How long does the new silicone need before I use the shower?
Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or follow the cure time we give you.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
What bathroom resealing looks like in Grandtully
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
Rented homes near Pitlochry station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Grandtully is about 17 miles west of Blairgowrie and Rattray, in Perth and Kinross. Every kind of property in Grandtully can book us for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Across Perth and Kinross, we cover 107 places, and Grandtully is one of them. There’s also a page for Dundee, roughly 33 miles from Grandtully.
Work in PH15 and PH9 works the same way as everywhere else we cover. Whether your property is on The Paddock and Lageonan Road or anywhere close by, we can help. Nearby, we also carry out bathroom resealing in Little Ballinluig (1 mile south-west), Port na Craig (3 miles north-east), Logierait (4 miles east), Pitlochry (4 miles north-east) and Ballinluig (4 miles east).
Landmarks near Grandtully
For rail, the closest station is Pitlochry station, roughly 3.4 miles north-east of the centre. Other landmarks nearby include Pitlochry Community Hospital (3.4 miles north-east) and Tom na Croiche (3.8 miles east). Not far away are Loch na Bà.
Looking after it afterwards
After the cure time, these simple habits help:
- Keep an eye on the corners, where splits start
- Wait for the cure time we give you
- Run the extractor fan during and after every shower
- Keep scourers and sharp tools away from the bead
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
When to call us in Grandtully
Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
Any of these means the joints need attention:
- Sealant that has split, shrunk or peeled away
- Damp behind the bath or under the tray
- Gaps where the bath or tray has moved
- New sealant laid over old sealant that is now lifting
If you live in an older home near Strathtay Parish Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Comparing quotes
- How much experience the applicator has
- How the joint is cleaned and prepared
- What guarantee comes with the work
- How the colour is chosen
Different surfaces, different methods
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Filling the bath first allows for that movement.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. Where the sealant around the visible edge has failed, we renew it.
Places near Grandtully
What else we do in Grandtully
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.