Surrey · England
Bathroom & kitchen resealing in Hammer, Surrey
Our applicators work in Hammer on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Black mould in the silicone that will not clean off
- A bead that has pulled away from the tiles
- Smears of silicone across the tiles
Bathroom resealing in Hammer
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We work on basins & vanity units, wet rooms and kitchen worktops & upstands, and people most often call us about a bead that has pulled away from the tiles and black spots spreading through the bead.
Homes around Hammer are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Hammer (GU27)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Hammer homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as St. Stephen's Church, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Haslemere station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Hammer is about 9 miles south of Farnham, in Surrey. Hammer gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 395 places in Surrey are on our list. For nearby work, see our Portsmouth page.
Jobs for bathroom resealing in GU27 is quoted and booked the same way as anywhere else. Bathroom resealing is available to properties on Hammer Lane, Moor Road and Copse Road and the roads around them. We also cover the places around Hammer: Woolmer Hill (1 mile south), Hammer Bottom (1 mile west), Shottermill (1 mile east), Bramshott Chase (1 mile north) and Linchmere (1 mile south-west). We also work in nearby towns such as Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
What’s near Hammer
Around Hammer, our work takes us to homes and buildings near The Prince of Wales pub and Camelsdale Primary School and the streets around them. Hammer’s nearest station is Haslemere station, about 1.5 miles east. Other landmarks nearby include Haslemere and District Hospital (2 miles east). The countryside around Hammer includes Lynchmere Commons and Wheeler's Down.
Different surfaces, different methods
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, finished in a colour that suits the basin.
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Your questions about bathroom resealing in Hammer
Do you cover Hammer for bathroom resealing?
Yes, Hammer is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear price.
Is Hammer within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and we clear up when we’re done.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Do you do kitchens as well as bathrooms?
Yes, often alongside a bathroom. Where it’s needed by the sink, we use a food-safe sealant.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we are using and why.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Nearby places to Hammer
More services for Hammer
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. It won’t solve:
- Cracked or missing grout between tiles (that’s regrouting)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Loose or hollow tiles, or failed tanking behind them
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
Where we work in Hammer
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
- Baths
- Basins & vanity units
Landlords, agents and businesses in Hammer
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
What happens on the day
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it generally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a small place like Hammer, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Let us know if you’ve seen damp or leaks
- Let us know about stairs, lifts or work at height
- Clear the area around the work
Get a quote
For a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
Read more
Quotes for bathroom resealing in Hammer
Every job gets its own quote. This is what makes a difference:
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
- Working hours on commercial sites
- The old material and how stubborn it is
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
Asking for a quote
When you contact us, it’s useful to know:
- A few photos by email, if you can
- The problem you’ve noticed
- The rough size of the job
- If someone has resealed it before
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Do you need bathroom resealing in Hammer?
With age, silicone loses its stretch. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Hot pans and harsh cleaners don’t help.
Keep an eye out for any of the following:
- Shrunken sealant along the back of a worktop
- Gaps where the bath or tray has moved
- Smears of silicone across the tiles
- Black spots spreading through the bead
Schools such as Woolmer Hill School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before booking
- Which colour the sealant will be
- Are they insured?
- What guarantee comes with the work
- Whether the sealant suits the joint
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Let new sealant cure fully before it gets wet
- Keep the fan on for a while after bathing
- Never pick at the silicone with a blade
- Use gentle cleaners on the silicone
Do not stand bottles along the bead, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. A reseal in time can save the worktop.