Surrey · England
Bathroom & kitchen resealing in Ash, Surrey
Our applicators work in Ash on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly.
- Lumpy, uneven sealant from a DIY attempt
- Mouldy sealant that has gone black
- Water getting behind the bath panel
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Bathroom resealing for homes and businesses in Ash
Sealant that’s mouldy, cracked or peeling shouldn’t be left until there’s a leak. A photo of the joints helps when you phone 0345 464 0079 or email us, and we will send you a clear quote for bathroom resealing in Ash. If you have sealant that has split, shrunk or peeled away and water getting behind the bath panel, we can help.
Homes around Ash range from older cottages to more recent houses. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
Each job carries a 12-month guarantee.
- Where
- Ash (GU12, GU10)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Don’t leave water standing on kitchen joints
- Don’t let bottles sit on the bead
- Squeegee the walls and tray after use
- Run the extractor fan during and after every shower
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Common questions in Ash
Do you cover smaller places like Ash?
Yes. Ash is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Ash station?
Yes. We work for landlords and letting agents as well as householders. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s normally around 24 hours. Getting it wet too early can spoil the new joint.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is normally more efficient.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages.
How long does a bath or shower reseal take?
One bath or shower is around two hours’ work, old sealant removal included. A full bathroom and kitchen can take most of a day.
My sealant has gone black. Can you sort it?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
What happens on the day
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and clear up. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is. A visit to Ash is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- Tell us about any previous sealing or DIY attempts
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Advice
What affects the cost of bathroom resealing
Your quote is based on your job. We take into account:
- The product the joint needs
- The amount of work
- The number of rooms or windows
- Any working-time requirements on site
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Asking for a quote
When you call or email, it’s useful to know:
- How we’d reach the joints
- A few pictures by email, if you can
- The address or postcode of the job
- Roughly how big the job is
Want a quote for bathroom resealing? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Landlord and commercial work in Ash
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Hotels need rooms back in use, so the work can be planned room by room. We have worked in hotels as well as homes and businesses.
How the job changes by surface
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. The extra cleaning is what makes the bead last.
Shower trays & enclosures
Water often gets past the wall profile of a shower enclosure. We reseal it along with the base of the enclosure, sealing the side the enclosure’s instructions call for.
Also in Ash
Why act early in Ash
Running new silicone over the old joint can look tidy for a few weeks, but it won’t bond. Water creeps under it and mould follows, and the next reseal means two layers to cut out. In a smaller place like Ash, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why choose Mr Mastic in Ash
- Rated 4.9 stars on Google
- Full insurance on every job
- Colour picked to suit the job
- We leave the area clean and tidy
See what affects the cost and what customers say.
Ash homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Schools such as Walsh CofE Junior School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around Church of St Peter, walls and floors in older homes can move, and sealant and grout show it first. For landlords with property near Ash station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Ash is about 2 miles east of Aldershot, in Surrey. Our applicators cover bathroom resealing for householders, landlords and businesses in Ash and the surrounding area, as part of our work across Surrey. Ash is one of 395 places in Surrey where we work for bathroom resealing. We also work in Reading, around 18 miles away.
Here we cover the GU12 and GU10 postcode area for bathroom resealing. You will find streets such as Ash Church Road, Square Field Way and Littlefield Close. You will find Ash on the A331 and B3206, which makes it straightforward to reach. Neighbouring places we cover for bathroom resealing include Ash Green (1 mile east), Tongham (1 mile south-west), Ash Vale (1 mile north), Seale (2 miles south) and Aldershot (2 miles west). Larger places within reach include Guildford (6 miles east), Woking (8 miles north-east), Camberley (6 miles north), Farnham (4 miles south-west), Egham (15 miles north-east) and Frimley (5 miles north).
Landmarks near Ash
Around Ash, our work takes us to homes and buildings near Aldershot Park, The Connaught School and The Dover Arms. Ash’s nearest station is Ash station, about 0.5 miles north-east of the centre. Nearby you’ll also find Farnham Castle (4 miles south-west) and Ash Museum (less than half a mile north-east). Open spaces near Ash include Rowhill Nature Reserve and Hog's Back.