Surrey · England

Regrouting in Ash, Surrey

Regrouting across Ash and nearby, with every bit of old sealant taken out first and a one-year guarantee.

  • Cracked or crumbling grout lines
  • Splashback grout that has darkened
  • Good tiles let down by tired grout

Book regrouting in Ash

Can I do it myself?

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

How we handle regrouting in Ash

Regrouting is usually paired with resealing. Grout belongs between tiles, but corners and edges move, so they need flexible silicone instead. Renewing both together means nothing is left half-done. We work on bathroom floors, shower walls and wet rooms, and the jobs we see most are cracked grout along the bath or tray and shower grout that has worn away.

In a smaller place like Ash, homes are mostly houses and bungalows rather than flats, from older cottages to newer builds. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.

Our work is backed for twelve months, and the guarantee is the same wherever you are.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Place
Ash (GU12, GU10)
Wider area
Surrey
Guarantee
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026

What happens on the day

Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to a full day, depending on the area. Parking around Ash is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.

  1. We check the tiles are sound and flag any that are loose or hollow.
  2. We rake out the old grout to an even depth, taking care of the tile edges.
  3. The joints are vacuumed and cleaned.
  4. We fill the joints with new grout, then clean the tiles.
  5. The corners and edges get new silicone, because grout there would crack.

Before we arrive

  • Where the joints are inside, avoid wetting them before we arrive
  • Mention any sign-in or site rules at work premises
  • Let us know about earlier repairs to the joints

Ask for a quote

For regrouting in Ash, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.

Get a quick quote

Read more

Work for landlords, hotels and businesses

Letting agents and landlords in Ash can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.

For anyone letting property in or around Ash, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.

Quotes for regrouting in Ash

You’ll get a clear quote before work begins. It’s based on:

  • The number and length of the joints
  • Working hours on commercial sites
  • Mould in or behind the old joints
  • Access and height

We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or send us an email.

Helping us quote

When you contact us, it’s useful to know:

  • Roughly how big the job is
  • The problem you’ve noticed
  • If someone has resealed it before
  • Photos by email, if that is easy

Want a quote for regrouting? Please phone 0345 464 0079 or send us an email and tell us about the job. We will explain what we’d do and send you a clear quote before any work starts.

What regrouting looks like in Ash

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

For landlords with property near Ash station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. Managing a site like Walsh CofE Junior School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.

Ash is about 2 miles east of Aldershot, in Surrey. Ash gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Ash is one of 395 towns and villages in Surrey we cover for regrouting. We also work in Reading, about 18 miles from Ash.

Our applicators cover all of the GU12 and GU10 postcode area for regrouting and the streets around it. Streets in the area include Ash Church Road, Square Field Way and Littlefield Close, all of which we cover. Ash is on the A331 and B3206, which makes it straightforward to reach. We also cover Ash Green (1 mile east), Tongham (1 mile south-west), Ash Vale (1 mile north), Seale (2 miles south) and Aldershot (2 miles west). Larger places within reach include Guildford (6 miles east), Woking (8 miles north-east), Camberley (6 miles north), Farnham (4 miles south-west), Egham (15 miles north-east) and Frimley (5 miles north).

Around Ash

Typical jobs here are in homes near Aldershot Park, The Connaught School and The Dover Arms, among other places. Ash’s nearest station is Ash station, roughly 0.5 miles north-east. Well-known places in the area include Farnham Castle (4 miles south-west) and Ash Museum (within half a mile north-east). The countryside around Ash includes Rowhill Nature Reserve and Hog's Back.

Map of Ash © OpenStreetMap contributors

Ash: your questions answered

Can you help a landlord with a rental near Ash station?

Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can call 0345 464 0079 or email us with the details for a clear quote.

Do you cover smaller places like Ash?

Yes, Ash is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Can I do it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Can you regrout if a few tiles are loose?

New grout cannot hold loose tiles in place. We flag any loose or hollow tiles before starting so you know where you stand.

Can you change the grout colour?

Yes. It’s the ideal time to change it. Tell us the colour you’d like when you ask for a quote.

What goes in the corners, grout or silicone?

Corners get silicone, not grout. They flex and grout can’t take that movement.

Which products do you use?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.

Can you do several jobs on one visit?

Yes. Tell us about everything you’d like done.

Do you need regrouting in Ash?

Movement behind the tiles cracks grout. That can be a loose tile, a flexing floor or a stud wall, which is why we check the tiles first.

These are the problems we’re asked about most:

  • Grout that makes sound tiles look old
  • Grout washed out of a shower
  • Greasy, stained grout behind the hob
  • Dirty, worn grout on a tiled floor

For an older house near a landmark such as Church of St Peter, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

What your quote should include

  • How hidden problems are handled
  • How the joint is cleaned and prepared
  • Which sealant they’ll use, and why
  • The length of the guarantee

Choosing a sealant specialist

Surface by surface

Bathroom floors

Cracked floor grout can point to movement underneath. We check the tiles before regrouting.

Corners and edges

Corners flex as the building moves, so they get silicone, not grout.

What happens if it’s left?

Grout pens and paint-on colourants only cover the surface. They do not fill cracks or stop water and stains often come back through. A proper regrout puts new grout in the joint. In a smaller place like Ash, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.

What it costs depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.

What you get with us

  • One-year guarantee on every job
  • Homes, businesses and hotels
  • 4.9 on Google from 180+ five-star reviews
  • We’re fully insured

See how sealant jobs are priced and our reviews.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job