Surrey · England
Hammer Bottom Bathroom Resealing
We cover Hammer Bottom for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Two layers of silicone, both failing
- A joint torn by a bath that flexes
- Mouldy sealant that has gone black
What the job involves on each surface
Sinks & splashbacks
The edge of an inset sink is a common place for water to get under the worktop. Where the sealant around the visible edge has failed, we renew it.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, so it’s cut out and renewed just like a bath joint.
Bathroom resealing in Hammer Bottom
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the bead is not stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. We work on baths, kitchen worktops & upstands and basins & vanity units, and the jobs we see most are a joint torn by a bath that flexes and gaps between the worktop and the wall.
Around Hammer Bottom, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
All of our work is guaranteed for twelve months, in Hammer Bottom and everywhere else we cover.
- Where
- Hammer Bottom (GU27, GU30)
- Region
- Surrey
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
On the day, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work starts. The work normally takes two to three hours for a typical bath, depending on how much old sealant there is. Somewhere like Hammer Bottom needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Mention if the joints have been sealed before
- Keep children and pets away from the work area
- Mention any parking rules near the property
How to get a quote
We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or send us an email with the details.
Advice
Towns and villages near Hammer Bottom
Also in Hammer Bottom
What bathroom resealing looks like in Hammer Bottom
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Haslemere station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. Managing a site like Woolmer Hill School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Hammer Bottom is about 9 miles south of Farnham, in Surrey. Our applicators cover bathroom resealing for homes and businesses in Hammer Bottom and the surrounding area. Our Surrey coverage runs to 395 places, and Hammer Bottom is one of them. We also work in Portsmouth, about 24 miles from Hammer Bottom.
All of GU27 and GU30 is within our area for bathroom resealing. If you need bathroom resealing at a property on Hammer Vale, Sandy Lane and Hewshott Lane or a nearby road, we can help. Neighbouring places we cover for bathroom resealing include Hammer (1 mile east), Woolmer Hill (1 mile south-east), Bramshott Chase (1 mile north), Linchmere (1 mile south) and Shottermill (1 mile east). We also work in nearby towns such as Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (13 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
Landmarks near Hammer Bottom
Around Hammer Bottom, our work takes us to homes and buildings near The Prince of Wales pub and Camelsdale Primary School. The nearest railway station is Haslemere station, about 1.9 miles east of the centre. Other landmarks nearby include Haslemere and District Hospital (2.4 miles east). For a walk, there’s Wheeler's Down and Lynchmere Commons.
Aftercare tips
Looking after new joints is easy:
- Let new sealant cure fully before it gets wet
- Open a window or run the fan so the room dries
- Avoid abrasive pads on the sealant
- Dry the bead with a towel now and then
Wipe up standing water along the worktop joint and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Small signs come before a leak: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.
Can I do it myself?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Common problems we fix in Hammer Bottom
Not every tube in the shop is meant for a shower. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they crack, discolour or grow mould quickly. A bathroom joint needs anti-fungal sanitary silicone.
The problems people normally mention when they call include:
- A joint torn by a bath that flexes
- A messy, uneven bead from a previous reseal
- Gaps between the worktop and the wall
- Water escaping at the shower enclosure
If you live in an older home near The Parish Church of St Peter, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- How hidden problems are handled
- Which sealant they’ll use, and why
- How much experience the applicator has
- What insurance they hold
When it is not the sealant
Before you book, it’s worth knowing the limits:
- A cracked shower tray or bath (that needs repair or replacement)
- Failed grout lines across the wall
- Loose or hollow tiles, or failed tanking behind them
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Wet rooms
- Baths
- Shower trays & enclosures
Common questions in Hammer Bottom
I let a flat near Haslemere station. Can you help?
Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Is Hammer Bottom in your area for bathroom resealing?
Yes, Hammer Bottom is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear quote.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Do you do kitchens as well as bathrooms?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
How long does it take to reseal a bath or shower?
It takes half a day or less for one room, longer when the kitchen is included. We will confirm how long your job needs when we quote.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
What colours of sealant can you use?
You are not limited to white: white, clear and colours to suit tiles and worktops. We will talk it through when we quote.