Surrey · England
Bathroom Resealing in Bramshott Chase
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Bramshott Chase and across Surrey. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Sealant that has split, shrunk or peeled away
- Gaps where the bath or tray has moved
- Leaking joints on a shower screen
About our bathroom resealing in Bramshott Chase
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on wet rooms, sinks & splashbacks and basins & vanity units, and common reasons people get in touch are leaks into the floor or ceiling below and water escaping at the shower enclosure.
Around Bramshott Chase, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Bramshott Chase (GU26)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026

Common questions in Bramshott Chase
Do you cover Bramshott Chase for bathroom resealing?
Yes. We work across London and the South East, and Bramshott Chase is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing.
Is Bramshott Chase within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you just seal over the old silicone?
No, never. Sealing over the top looks fine for a few weeks, then lifts. Every trace of the old bead is removed first.
Do you work for letting agents?
Yes. Domestic, commercial and hotel work are all part of what we do, and we’re fully insured.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Does the resealing come with a guarantee?
Yes. All our work comes with a 12-month guarantee.
Also near Bramshott Chase
What else we do in Bramshott Chase
What affects the quote in Bramshott Chase
Jobs vary more than people expect. The main factors:
- The size of the job
- Any working-time requirements on site
- How many rooms, windows or areas are involved
- Whether old sealant or filler has to be cut out
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What to tell us for a quote
When you call or email, it’s useful to know:
- Pictures of the joints, sent by email
- How we’d reach the joints
- Where the property is
- Roughly how big the job is
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, call 0345 464 0079 or email us.
Should I try it myself first?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
When to call us in Bramshott Chase
Older sealant shrinks and hardens. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Hot pans and harsh cleaners don’t help.
Signs it’s time to call us include:
- A reseal done over the top of the old bead
- Water escaping at the shower enclosure
- A joint torn by a bath that flexes
- Cracked, shrunken or lifting silicone
Schools such as Woolmer Hill School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
What your quote should include
- How the colour is chosen
- How the surfaces are prepared before sealing
- What the quote includes, VAT included or not
- What happens if the job turns out different
What sealant work cannot fix
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- A bath or tray that moves because it is not properly supported
- A leaking waste, trap or valve
- Cracked or missing grout between tiles (that is regrouting)
If in doubt, call 0345 464 0079 or email us and we will say what we think before you book.
Where we work in Bramshott Chase
- Wet rooms
- Sinks & splashbacks
- Shower trays & enclosures
- Kitchen worktops & upstands
- Basins & vanity units
- Baths
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Clean with a mild bathroom cleaner and a soft cloth
- Check the joints every few months for splits or lifting
- Squeegee the walls and tray after use
- Don’t let bottles sit on the bead
Have a look at the joints every few months. A small split or a corner lifting is easy to spot, and if anything looks wrong, just phone 0345 464 0079 or drop us an email.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
How it works
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take half a day or less for one room, longer when the kitchen is included. Somewhere like Bramshott Chase needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Mention any tricky access
- Mention any parking rules near the property
- Tell us about any previous sealing or DIY attempts
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved.
Advice
What happens if it’s left?
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that’s a far bigger job than a reseal. Where a wall is exposed, as many are in small places like Bramshott Chase, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Why us?
- Colour picked to suit the job
- Quality sealants from Arbo and Everbuild
- Any old sealant cut out fully, not covered over
- Full insurance on every job
Bramshott Chase homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Haslemere station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. In the older streets around Church of St Luke, walls and floors in older homes can move, and sealant and grout show it first.
Bramshott Chase is about 8 miles south of Farnham, in Surrey. Homes, rented property, offices and hotels in Bramshott Chase can book us for bathroom resealing. Every job comes with our 12-month guarantee. We cover 395 towns and villages across Surrey, large and small. For nearby work, see our Portsmouth page, about 24 miles away.
Here we cover the GU26 postcode area for bathroom resealing. That includes homes and businesses on Upper Hammer Lane, Old Bramshott Chase and Portsmouth Road and the roads around them. Other places close to Bramshott Chase include Hammer Bottom (1 mile south), Hammer (1 mile south), Shottermill (1 mile south-east), Woolmer Hill (1 mile south) and Haslemere (2 miles south-east). We also work in nearby towns such as Guildford (13 miles north-east), Farnham (8 miles north), Frimley (15 miles north), Cranleigh (12 miles east), Ash (10 miles north) and Godalming (9 miles north-east).
What’s near Bramshott Chase
Locally, jobs take us to homes and businesses close to Shottermill Junior School and The Prince of Wales pub, among other places. The closest station to Bramshott Chase is Haslemere station, roughly 1.7 miles east. Nearby you’ll also find Haslemere and District Hospital (2.1 miles east). Green spaces nearby include Upper Lake and Gibbet Hill.
