Surrey · England
Bathroom & kitchen resealing in Woolmer Hill, Surrey
Bathroom resealing across Woolmer Hill and nearby, with old sealant always removed completely and a one-year guarantee.
- Gaps between the worktop and the wall
- Damp behind the bath or under the tray
- Failed sealant on the screen profile
Bathroom resealing for homes and businesses in Woolmer Hill
A bead that has gone black, split or come away is worth sorting before it lets water through. A photo of the joints helps when you ring 0345 464 0079 or drop us an email, and we’ll give you a clear quote for bathroom resealing in Woolmer Hill. If you have water escaping at the shower enclosure and new sealant laid over old sealant that is now lifting, we can help, whatever the surface.
Around Woolmer Hill, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
A one-year guarantee comes as standard, so you’re covered after we’ve gone.
- Where
- Woolmer Hill (GU27)
- Region
- Surrey
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Aftercare tips
Good habits help new joints last longer. Our tips:
- Use gentle cleaners on the silicone
- Avoid abrasive pads on the sealant
- Wipe up water along the back of the worktop
- Wait for the cure time we give you
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
Towns and villages near Woolmer Hill
Also in Woolmer Hill
FAQs for Woolmer Hill
Can you do bathroom resealing in Woolmer Hill?
Yes, Woolmer Hill is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Do you cover smaller places like Woolmer Hill?
Yes, Woolmer Hill is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it normally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Can new silicone go straight over the old?
No, never. Sealing over the top looks fine for a few weeks, then lifts, because silicone does not bond to silicone. We remove the old bead completely before resealing.
Do you guarantee your resealing?
Yes. All our work comes with a 12-month guarantee, and we are fully insured.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
The process
When we arrive, we look over the joints with you first. We protect the surfaces around the joints before work begins. The work usually takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere as small as Woolmer Hill, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, usually after around 24 hours.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- For business premises, tell us about site rules or sign-in
- Mention any leaks or damp you’ve noticed
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.
Related advice
Bathrooms and kitchens in Woolmer Hill
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Haslemere station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you look after a building such as Camelsdale Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Homes close to St Paul include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Woolmer Hill is about 1 mile south-west of Haslemere, in Surrey. Whether you are in the middle of Woolmer Hill or further out, we cover bathroom resealing for every kind of property. Our area takes in 395 places across Surrey. We also work in Crawley, around 24 miles away.
Every address in GU27 is within our area for bathroom resealing, from the main roads to the quietest streets. If you need bathroom resealing at a property on Moor Road, Copse Road and Hammer Lane or a nearby road, our applicators can take on the job. Neighbouring places we cover for bathroom resealing include Hammer (1 mile north), Hammer Bottom (1 mile north-west), Shottermill (1 mile north-east), Linchmere (1 mile south-west) and Bramshott Chase (1 mile north). Further out, we also cover Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (12 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
What’s near Woolmer Hill
Locally, jobs take us to homes and businesses close to Woolmer Hill School, Woolmer Hill School and Mill Tavern, among other places. For rail, the closest station is Haslemere station, about 1.5 miles north-east of the centre. Nearby you will also find Haslemere and District Hospital (2 miles north-east). Green spaces nearby include Lynchmere Commons and Wheeler's Down.
Quotes for bathroom resealing in Woolmer Hill
Every job gets its own quote. This is what makes a difference:
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- The number and length of the joints
- Mould in or behind the old joints
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Asking for a quote
When you call or email, these details help:
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- Any access issues, like height or stairs
- A few photos by email, if you can
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Failed grout lines across the wall
- Tiles that have come away from the wall
- Cracks in the tray itself rather than the joint
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Joints and surfaces we work on
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Wet rooms
- Sinks & splashbacks
- Basins & vanity units
Landlord and commercial work in Woolmer Hill
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can be quoted together.
If you manage several properties in or around Woolmer Hill, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
What the job involves on each surface
Baths
The long joint down the side of a bath is where most leaks start, particularly where there’s a shower over the bath. It gets one smooth bead of anti-fungal silicone, tooled so water can’t sit on it.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.