Surrey · England
Mastic man in GU27
We cover every part of the GU27 postcode district, including Haslemere, Shottermill and Fernhurst. Every joint is properly prepared, with a one-year guarantee.
Areas within GU27
- Haslemere
- Shottermill
- Fernhurst
- Grayswood
- Hammer
- Kingsley Green
- Woolmer Hill
- Hammer Bottom
- Ansteadbrook
- Linchmere
Services in GU27
- Fire-rated sealant
- Regrouting
- Glazing & conservatory sealant
- Commercial & hotel sealant
- Remedial sealant & repairs
- New-build mastic & snagging
- Sand mastic for sash & case windows
- External & façade joints
- Bathroom & kitchen resealing
- Gutter, fascia & soffit sealing
- Floor & skirting joints
- Window & door mastic
- See all services
Tell us what needs doing and your postcode for a quick quote: call 0345 464 0079 or send us an email.
Our bathroom resealing service in GU27
The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. Only once it’s dry does the new bead go on. We work on wet rooms, sinks & splashbacks and kitchen worktops & upstands, and common reasons people get in touch are lumpy, uneven sealant from a DIY attempt and failed sealant on the screen profile.
There’s no need to move everything out, only the area right around the joints. We protect the rest, and the job takes a couple of hours for a single bath or shower for a typical job.
- We protect the area and cut out all of the old sealant.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We tidy up and give you the cure time, normally around 24 hours.
What affects the price in GU27
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- Sanitary silicone with an anti-fungal additive in wet areas
- 4.9 on Google from 180+ five-star reviews
- Domestic, commercial and hotel work
- Quality sealants from Arbo and Everbuild
Get a quote
Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Around Haslemere
Around Haslemere, our work takes us to homes and buildings near Shottermill Infant School, Church of St Christopher and Royal School Haslemere, among other places. Also close by are Woolmer Hill School (1.3 miles west) and The White Lion Public House (0.5 miles east). Haslemere has its own railway station: Haslemere station. A little further out are Haslemere and District Hospital (0.6 miles north-east). For a walk, there’s Upper Lake and Lynchmere Commons.
Bathrooms and kitchens across GU27
Homes across GU27 range from older properties to new builds, with plenty of rented property in places like Haslemere, Shottermill and Fernhurst. Bathroom resealing keeps bathrooms and kitchens watertight and looking cared for.
London and the South East are among the drier parts of the UK, though outside sealant still needs a dry, clean joint, so work across GU27 is planned around the weather.
Haslemere: If you live in an older home near Church of St Christopher, walls and floors in older homes can move, and sealant and grout show it first. Schools such as Shottermill Infant School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Check the joints every few months for splits or lifting
- Wipe up water along the back of the worktop
- Run the extractor fan during and after every shower
- Stick to a soft cloth and a mild cleaner
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
Landlord and commercial work in GU27
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
What affects the cost of bathroom resealing
We quote each job individually. This is what makes a difference:
- The type of sealant required
- Working hours on commercial sites
- The old material and how stubborn it is
- How many areas need sealing
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What we need to know
Photos by email are helpful but not essential. Please mention:
- The type of property
- The rough size of the job
- If someone has resealed it before
- Any access issues, like height or stairs
If you’re in GU27 and need bathroom resealing, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.
What we’re called out for in GU27
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, so a rushed job can start to lift early.
These are the problems we are asked about most:
- New sealant laid over old sealant that is now lifting
- Leaks into the floor or ceiling below
- Water escaping at the shower enclosure
- A messy, uneven bead from a previous reseal
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Your questions about bathroom resealing in GU27
How much does bathroom resealing cost in GU27?
Size, access and the old material all affect the cost. Ask us for a quote.
Is it OK to put new sealant on top of the old bead?
No. Fresh silicone cannot stick to the old bead, so it peels away and hides mould and water. All the old sealant comes out first.
Do you have insurance?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Do you work in GU27?
We do. GU27 is part of the area we cover, and the service is the same as everywhere else.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Do you work for landlords and businesses?
Yes, regularly. We can quote for several properties at once, and between tenancies is a good time for the work.