Surrey · England
Hammer Remedial Sealant
Remedial sealant across Hammer and nearby, with old sealant always removed completely and a one-year guarantee.
- Beads that never stuck properly
- Products that weren’t meant for the joint
- Kitchen joints letting water behind the worktop
Quotes for remedial sealant in Hammer
The price is agreed before any work begins. It’s based on:
- How many rooms, windows or areas are involved
- The product the joint needs
- How much old sealant there is and how hard it is to remove
- Working hours on commercial sites
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will explain what it covers.
What to tell us for a quote
To help us quote quickly, please include:
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
- A few pictures by email, if you can
- What’s wrong with the joints now
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.
Remedial sealant in Hammer, done properly
Remedial work is what we do when sealant has failed or been done badly. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all need stripping out before the joint can be done properly. We’re often asked to deal with movement joints that have split or pulled away and thick, messy sealant smeared over tiles, across failed movement joints, leaking tray & enclosure joints and mouldy bath & shower sealant.
In a village or hamlet like Hammer, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Hammer (GU27)
- Wider area
- Surrey
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Your questions about remedial sealant in Hammer
Can you do remedial sealant in Hammer?
Yes, Hammer is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and tell us what needs doing.
Will you come out to Hammer?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can landlords and businesses book you?
Yes, regularly. We can quote for several properties at once, and between tenancies is a good time for the work.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is generally more efficient.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in.
What if resealing will not fix my leak?
You will hear it from us. A cracked tray, faulty valve or leaking waste needs a different trade, and we won’t reseal for the sake of it.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status.
Bathrooms and kitchens in Hammer
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you live in an older home near St. Stephen's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Letting a property close to Haslemere station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Hammer is about 9 miles south of Farnham, in Surrey. From the centre of Hammer to the outskirts, we cover remedial sealant for every kind of property. Across Surrey, we cover 395 places, Hammer among them. We also work in Portsmouth, about 24 miles from Hammer.
Every address in GU27 is covered for remedial sealant. Remedial sealant is available to properties on Hammer Lane, Moor Road and Copse Road. Other places close to Hammer include Woolmer Hill (1 mile south), Hammer Bottom (1 mile west), Shottermill (1 mile east), Bramshott Chase (1 mile north) and Linchmere (1 mile south-west). We also work in nearby towns such as Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
What’s near Hammer
In Hammer, that means homes and buildings near The Prince of Wales pub and Camelsdale Primary School and the streets around them. Hammer’s nearest station is Haslemere station, about 1.5 miles east of the centre. A little further out are Haslemere and District Hospital (2 miles east). Open spaces near Hammer include Lynchmere Commons and Wheeler's Down.
Surface by surface
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath.
Mouldy bath & shower sealant
Mould that has grown into silicone doesn’t clean out for good. All of it comes out, and the joint is treated and dried before anti-fungal sanitary silicone goes in.
The process
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the work takes a few hours for a typical bath or shower, longer where several layers have been applied for a typical job. Somewhere as small as Hammer, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
- Let us know about stairs, lifts or work at height
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Read more
Landlords, agents and businesses in Hammer
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What sealant work cannot fix
To be straight with you, there are a few things sealant will not fix:
- Tiles that have come away from the wall
- Sealant in an older building that needs testing for asbestos first
- A tray or worktop that needs refixing first
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
Where we work in Hammer
- Failed movement joints
- Expansion joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
Also in Hammer
Signs you need remedial sealant in Hammer
Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
Most people get in touch after spotting something like this:
- Sealant peeling off a dusty or damp surface
- Dark patches showing through the sealant
- Decorators’ caulk around a bath or shower
- Kitchen joints letting water behind the worktop
For site and facilities teams at buildings such as Woolmer Hill School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What to look for in a quote
- How long to leave it before use
- Whether VAT is included
- How the surfaces are prepared before sealing
- How long the guarantee is
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Check trays and worktops don’t move
- Ask why a joint failed before redoing it
- Clean sealant with mild products only
- Don’t add new sealant on top of old
Give the new sealant its full cure time: follow the cure time we give you.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.