Orkney Islands · Scotland
Bathroom & kitchen resealing in Brinian, Orkney Islands
Bathroom resealing for Brinian, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- A bead that has pulled away from the tiles
- Leaking joints on a shower screen
- New sealant laid over old sealant that is now lifting
Your questions about bathroom resealing in Brinian
Is Brinian in your area for bathroom resealing?
Yes. We work across all of Scotland, and Brinian is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Do you cover smaller places like Brinian?
Yes, Brinian is covered. We work across all of Scotland, islands included, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
How long will the resealing take?
It takes a couple of hours for a single bath or shower. We’ll confirm how long your job needs when we quote.
Is white the only colour available?
We can use white, clear or a colour to suit. On a worktop we colour-match where the joint shows.
Can you reseal around my kitchen sink and worktop?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Does the resealing come with a guarantee?
Yes. All our work comes with a 12-month guarantee.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
When can I use the bath or shower again?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
About our bathroom resealing in Brinian
Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. Just drop us a line at info@mrmastic.co.uk with a photo of the joints, and we will give you a clear quote before any work starts. If you have new sealant laid over old sealant that is now lifting and leaking joints on a shower screen, we can help.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
There’s a 12-month guarantee on every job.
- Place
- Brinian (KW17)
- Region
- Orkney Islands
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What else we do in Brinian
Surface by surface
Baths
A bath shifts slightly every time it’s filled, so it’s filled with water before the bead goes on. The joint is then laid with the bath at its lowest point and is not stretched when it’s used.
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
When to call us in Brinian
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
If you can see any of these, it’s time to have the joints looked at:
- A bead that has pulled away from the tiles
- Water getting behind the kitchen upstand
- Mouldy sealant that has gone black
- A reseal done over the top of the old bead
Around Brinian, as everywhere, bathroom resealing is only as good as the preparation behind it.
What to look for in a quote
- What the cure time is
- How much experience the applicator has
- What preparation is included
- How hidden problems are handled
What we do, step by step
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes around two hours for one bath or shower, longer for a whole bathroom. Outdoor work around Brinian depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, generally around 24 hours.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention any tricky access
- For business premises, tell us about site rules or sign-in
Getting a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Related advice
Why deal with it now?
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it generally comes back. The lasting answer is to remove the bead and start again. Around Brinian, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- We’re fully insured
- A sealant colour to suit the surroundings
- A 12-month guarantee on all work
- Homes, businesses and hotels
Landlords, agents and businesses in Brinian
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
What bathroom resealing looks like in Brinian
Brinian is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Whether the job is in Brinian itself or nearby, the right material for each joint matters as much as a neat finish.
Brinian is about 10 miles north of Kirkwall, in the Orkney Islands. For bathroom resealing in and around Brinian, please drop us a line at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover the Orkney Islands. Across the Orkney Islands, we cover 51 places, and Brinian is one of them.
Here we cover the KW17 postcode area for bathroom resealing. With the B9065 close by, Brinian is simple for us to get to. If you are just outside Brinian, we cover Tingwall (4 miles south-west), Evie (5 miles west), Gorseness (5 miles south), Isbister (6 miles south-west) and Norseman (7 miles south-west). Brinian is among the bigger towns we cover in the Orkney Islands. Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Local landmarks in Brinian
Nearby you will also find Langskaill House (3.5 miles south). Green spaces nearby include Loch of Oorns and Blotchnie Fiold.
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Avoid abrasive pads on the sealant
- Stick to a soft cloth and a mild cleaner
- Run the extractor fan during and after every shower
- Do not leave water standing on kitchen joints
Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.