Orkney Islands · Scotland
Bathroom & kitchen resealing in Isbister, Orkney Islands
Our applicators work in Isbister on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Smears of silicone across the tiles
- Black spots spreading through the bead
- Water escaping at the shower enclosure
Landlord and commercial work in Isbister
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.
Bathroom resealing in Isbister
Homes in Isbister have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. If you are dealing with leaks into the floor or ceiling below and shrunken sealant along the back of a worktop, we can help.
For a place like Isbister, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Place
- Isbister (KW17)
- Wider area
- Orkney Islands
- Cover
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Questions from Isbister
What guarantee comes with bathroom resealing in Isbister?
All our work, in Isbister and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Do you cover Isbister for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Isbister is part of that. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is it messy?
We keep the work tidy. Nearby surfaces are protected.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Bathroom resealing in Isbister: local notes
Isbister is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Work on the islands has to be planned around ferry crossings and the weather, so the more notice, the better.
Whether the job is in Isbister itself or nearby, the right material for each joint matters as much as a neat finish. Around Isbister, as everywhere, bathroom resealing is only as good as the preparation behind it.
Isbister is about 6 miles north-west of Kirkwall, in the Orkney Islands. Every kind of property in Isbister is covered for bathroom resealing. Every job comes with our 12-month guarantee. Across the Orkney Islands, we cover 51 places, Isbister among them.
Every address in KW17 is covered for bathroom resealing. Neighbouring places we cover for bathroom resealing include Norseman (1 mile west), Gorseness (2 miles north-east), Settiscarth (2 miles west), Tingwall (3 miles north) and Finstown (4 miles south-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
What’s near Isbister
Well-known places in the area include Langskaill House (3.3 miles north-east). For a walk, there’s Enyas Hill and Birsay moors RSPB Reserve.
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Wipe the sealant dry after showering
- Clean with a mild bathroom cleaner and a soft cloth
- Wipe up water along the back of the worktop
- Never pick at the silicone with a blade
Keep bottles and razors off the sealant line, as they hold water against it. Squeegeeing the walls and tray after use helps the joint dry.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
What the job involves on each surface
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We reseal the joints and will tell you if the water seems to be coming from somewhere else.
Places near Isbister
Also in Isbister
The process
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take half a day or less for one room, longer when the kitchen is included. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you are told the cure time, generally around 24 hours.
Before we arrive
- Mention any tricky access
- Let us know about parking restrictions
- Keep children and pets away from the work area
Getting a quote
For bathroom resealing in Isbister, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
What we can’t put right
We will not take on work that will not last, so these are the limits:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracked or missing grout between tiles (that is regrouting)
- Loose or hollow tiles, or failed tanking behind them
If you are not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
How we quote for bathroom resealing
Some jobs are bigger than they look, and some smaller. The main factors:
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- When we can work, for business premises
- The number and length of the joints
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk for an honest opinion and a quote.
Helping us quote
When you call or email, these details help:
- Where the job is, and your postcode
- The problem you’ve noticed
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.