Moray · Scotland
Window Mastic in Buckie
Problem with your window and door frames in Buckie? We remove the old material, prepare the joints and seal them properly.
- Rain getting in at the frame or under the sill
- White mastic on grey or black frames
- Gaps left after new windows were fitted
Window mastic for homes and businesses in Buckie
A window frame and the wall around it expand and shrink at different rates. Heat and cold make frames grow and shrink against brick or render that hardly moves. That is why the joint needs a flexible, low-modulus sealant rather than something rigid. We work on uPVC windows, composite doors and aluminium frames, and the jobs we see most are untidy mastic left by window fitters and draughty joints inside around the window.
In a town like Buckie, plenty of homes have harled (roughcast) walls, and sealing a frame against rough harling takes a sealant that grips and moves. A thin bead that hasn’t been worked into the surface soon lets water behind it.
There’s a 12-month guarantee on every job, large or small.
- Location
- Buckie (AB56)
- Wider area
- Moray
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Different surfaces, different methods
Composite doors
A composite door generally sits in a plastic outer frame, so its perimeter joint is sealed much like a window. We match the colour to the frame.
uPVC windows
Some uPVC windows were sealed at fitting with a quick bead that never bonded. It comes out, deep gaps get backing rod and the joint is resealed.
How it works
Every visit runs the same way: we look at the joints together, protect the area around them, do the work and clear up. Most jobs take a few hours for a handful of frames, longer for a whole house. In a Scottish town like Buckie, parking is generally straightforward, though older centres can be tighter. If you’re in a flat with a shared stair or a door entry system, let us know when you book.
- We check how each frame can be reached safely.
- All the failed sealant is cut away.
- Frame and wall are cleaned and must be dry before sealing.
- Deep voids are backed, then the sealant is gunned in.
- We tool the joint so water runs off, then clear up.
How to prepare
- Tell us about any water getting in
- Tell us about any previous sealing or DIY attempts
- Let us know about stairs, lifts or work at height
Ask for a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved.
Read more
Other services in Buckie
Buckie: your questions answered
Do you cover Buckie for window mastic?
Yes. Our work covers the whole of Scotland, and Buckie is part of that. You can email us at info@mrmastic.co.uk and let us know what needs doing.
Is window mastic in a coastal place like Buckie any different?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. The right product, a clean joint and the right depth all help it cope.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you get sealant to suit coloured frames?
Yes. We can use white, brown, anthracite grey, black or clear.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will tell you what we are using.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we’re done.
Buckie homes and the weather
Buckie is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on the mastic around window and door frames, especially on the side facing the sea. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.
In and around Buckie, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.
Buckie is about 13 miles east of Elgin, in Moray. We carry out window mastic for homeowners, landlords and businesses in Buckie and nearby, as part of our work across Moray. Buckie is one of 58 places in Moray where we work for window mastic. We also work in Aberdeen, around 48 miles away.
Work in AB56 works the same way as everywhere else we cover. Local streets include Cluny Square, North High Street and High Street. With the A942 and A990 close by, Buckie is easy for our applicators to reach. Close by, we work in Ianstown (1 mile north-east), Rathven (1 mile east), Portessie (1 mile north-east), Arradoul (1 mile south-west) and Portgordon (2 miles south-west). Further out, we also cover Elgin (13 miles west), Lossiemouth (12 miles west), Keith (9 miles south), Ashgrove (13 miles west), Portknockie (4 miles north-east) and Cullen (6 miles east). Buckie is among the bigger towns we cover in Moray. For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.
What’s near Buckie
Other landmarks nearby include Seafield Hospital (0.7 miles south-west) and Findochty Castle (2.3 miles north-east).
Common problems we fix in Buckie
On timber frames, paint and putty build up around the joint. Mastic painted over many times cracks with the paint, and timber moves with moisture as well as temperature.
The most common problems we see are:
- Rushed sealant from a window installation
- Gaps where the sill meets the wall
- Draughty joints inside around the window
- Draughts coming in around windows and doors
Schools such as Buckie High School are buildings too, and larger buildings have plenty of frames, and the mastic around each one ages.
What your quote should include
- What happens if the job turns out different
- What insurance they hold
- What product goes in the joint
- The length of the guarantee
What affects the cost of window mastic
You’ll get a clear quote before work begins. It’s based on:
- The number and length of the joints
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
- Which sealant suits the joint
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
What to tell us for a quote
What to tell us when you ask for a quote:
- How many joints, rooms or windows are involved
- How we’d reach the joints
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before any work starts.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Air rooms to keep condensation down around windows
- Keep paint off silicone joints
- Avoid blasting the frames with a pressure washer
- Use gentle cleaners on frames and sealant
On timber frames, keep the paintwork in good order, because bare, wet timber moves more and pulls at the joint. Paint up to the joint, not over the silicone.
Water gets in quietly when mastic fails. You might not see it until plaster blows or a damp patch appears inside. Catching it early keeps the fix to a reseal.
Why it’s worth doing now in Buckie
Getting a straight, even bead on an outside frame takes practice, especially on upper floors. A professional job is cut out properly, backed where needed and finished neatly, using a product chosen for the frame and wall. In Buckie, wind and rain soon get through failed outside joints. Indoors, failed sealant lets water into floors and ceilings.
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why Buckie customers choose us
- 180+ five-star Google reviews
- Anti-fungal silicone where joints get wet
- An ARBOMaster approved applicator
- You choose the colour before work begins
Read what affects the cost and customer reviews.
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.