Moray · Scotland

Window Mastic in Findochty

Window and door frames in Findochty need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • A bead that does not match the frame
  • Untidy mastic left by window fitters
  • Mastic that has split away from the wall

Window mastic near Findochty

About our window mastic in Findochty

Over two decades of sealing frames has taught us which products suit which walls. We’re fully insured ARBOMaster approved applicators, and we give a 12-month guarantee on the work. If you are dealing with water coming in at the bottom corners of a door and draughts coming in around windows and doors, we can help, on composite doors, timber windows & doors and uPVC windows alike.

Older stone-built homes in Scotland often have sash and case or timber windows set in stone. Those suit a traditional sand mastic or a neutral-cure sealant, not an acetoxy silicone that can attack some stone.

You’re covered for a year from the day we finish. If anything is not right with it, email us at info@mrmastic.co.uk.

Where
Findochty (AB56)
Region
Moray
Cover
A year, on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

DIY versus a professional finish

A DIY attempt does not rule out a professional job. We cut it out and start again.

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Common problems we fix in Findochty

A lot of older mastic was never designed to stay flexible. Once it’s rigid, every bit of frame movement pulls at it, and a gap opens along one edge.

Most people get in touch after spotting something like this:

  • Cracked or shrunken mastic around the frame
  • A bead that doesn’t match the frame
  • Mastic that is falling out in pieces
  • Untidy mastic left by window fitters

For an older house near a landmark such as Church Of Scotland, frames set in older brick or stone need a sealant that suits the wall as well as the frame.

Comparing quotes

  • How the joint is cleaned and prepared
  • What happens if they find a problem under the old sealant
  • How the colour is chosen
  • Is the old sealant removed completely?

Our hiring checklist

Aftercare tips

Once the sealant has cured, a few habits help it last:

  • Paint up to the joint, not over it
  • Walk round the house once a year and look at the joints
  • Avoid blasting the frames with a pressure washer
  • Ventilate rooms so frames do not stay wet inside

On timber frames, keep the paintwork in good order, because bare, wet timber moves more and pulls at the joint. Keep paint off the silicone itself.

Leaks generally show up in wet, windy weather, but sealant goes on best when frames and walls are dry. Sorting cracked mastic early means the joint is sound before the bad weather.

How we quote for window mastic

We do not publish a price list, because no two jobs are the same. The quote depends on:

  • Working hours on commercial sites
  • How many areas need sealing
  • The product the joint needs
  • The old material and how stubborn it is

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.

Asking for a quote

When you contact us, these details help:

  • Any previous sealing or DIY work
  • Photos by email, if that’s easy
  • How we’d reach the joints
  • How many joints, rooms or windows are involved

We quote each job on its own. Simply email us at info@mrmastic.co.uk and describe the job and send pictures if you have them.

Frames and glazing around Findochty

Findochty is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on the mastic around window and door frames, especially on the side facing the sea. Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.

In and around Findochty, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.

Findochty is about 3 miles north-east of Buckie, in Moray. From the centre of Findochty to the outskirts, window mastic is available for homes and businesses alike, from flats and houses to offices and hotels. Findochty is one of 58 places in Moray we cover. Our Aberdeen page covers work nearby (48 miles or so).

Every address in AB56 is within our area for window mastic, from the main roads to the quietest streets. That includes homes and businesses on Main Street, Station Road and Blantyre Terrace. With the A942 and B9020 close by, Findochty is easy for our applicators to reach. Neighbouring places we cover for window mastic include Buckpool (1 mile north), Portknockie (2 miles east), Portessie (2 miles south-west), Rathven (2 miles south-west) and Ianstown (2 miles south-west). Larger places within reach include Lossiemouth (14 miles west), Keith (11 miles south), Ashgrove (15 miles west), Cullen (3 miles east), Fochabers (9 miles south-west) and Lhanbryde (12 miles west). For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.

Around Findochty

Well-known places in the area include Findochty Castle (0.6 miles south-west) and Seafield Hospital (3.5 miles south-west).

Map of Findochty © OpenStreetMap contributors

Landlords, agents and businesses in Findochty

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.

Letting agents often deal with us directly. Tell us the address, the job and how access works.

How the job changes by surface

Aluminium frames

Aluminium needs a sealant that bonds to coated metal and we avoid acetoxy silicones, which can react with some metals. Neutral-cure sealant is the safe choice.

Window sills

Every drop off the glass ends up on the sill, so the joints at each end and underneath matter. They’re cut out and resealed with exterior sealant.

Findochty: your questions answered

Will you come out to Findochty?

Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.

Can you do window mastic in Findochty?

Yes. We work across all of Scotland, and Findochty is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.

Can landlords and businesses book you?

Yes, often. Several properties can be quoted together, and between tenancies is a good time for the work.

Do you hold any approvals?

Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.

Are you fully insured?

Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.

Can you work on commercial sites?

Yes. Hotels, offices and other businesses use us and we’re fully insured.

Can I paint over the new sealant?

Silicone generally won’t take paint. If you plan to paint, tell us first and we can use a paintable sealant where it suits the joint.

Where do you work from?

We are a Crawley-based firm. We work across South East England, London and Scotland.

How it works

Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes most of a day for a typical house, less for a few frames. Outside jobs in Findochty need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.

  1. First we look at every frame and agree the list.
  2. We remove the old mastic and clean the frame and the wall.
  3. Where gaps are deep, backing rod goes in first.
  4. New exterior sealant goes on in a matching colour and is tooled smooth.
  5. Finally we tidy up and check each joint.

How to prepare

  • Where the joints are inside, avoid wetting them before we arrive
  • Plan for the work area to be out of bounds to pets and children
  • Tell us about any previous sealing or DIY attempts

Get a quote

Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, send an email to info@mrmastic.co.uk.

Get a quick quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job