Aberdeenshire · Scotland
Remedial Sealant in Maud
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Maud and across Aberdeenshire. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- A shower that leaks however often it’s resealed
- Thick, messy sealant smeared over tiles
- Sealant applied over old sealant that has lifted
Remedial sealant for homes and businesses in Maud
If a joint has been resealed and is leaking again, it’s worth a proper look. Send pictures when you drop us a line at info@mrmastic.co.uk. Common call-outs are for dark patches showing through the sealant and decorators’ caulk around a bath or shower, across shrunken worktop sealant, botched or over-sealed joints and leaking tray & enclosure joints.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Maud (AB42)
- Region
- Aberdeenshire
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Honest limits
Before you book, it’s worth knowing the limits too:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Movement from fittings that are not supported
- Tiles that have come away from the wall
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before you book.
Surfaces we seal
- Leaking tray & enclosure joints
- Expansion joints
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Shrunken worktop sealant
Remedial sealant around Maud
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Around Maud, as everywhere, remedial sealant is only as good as the preparation behind it.
Maud is about 12 miles south of Fraserburgh, in Aberdeenshire. We provide remedial sealant to householders, landlords and businesses in Maud and the surrounding area, as part of our work across Aberdeenshire. Our area takes in 161 places across Aberdeenshire, large and small. You can also see our page for Aberdeen, roughly 25 miles from Maud.
We cover every part of AB42 for remedial sealant and the streets around it. That includes homes and businesses on Market Street, School Road and Deer Road and the roads around them. Other places close to Maud include New Deer (2 miles west), Turfhill (3 miles west), Old Deer (3 miles east), Stuartfield (3 miles east) and Auchnagatt (4 miles south). Larger places within reach include Peterhead (12 miles east), Fraserburgh (12 miles north), Ellon (11 miles south), Turriff (12 miles west), Roanheads (13 miles east) and Clerkhill (12 miles east).
Near you in Maud
A little further out are Maud Junction railway station (under half a mile east) and Brucklay Castle (1.6 miles north-west). Not far away are Pitfour Lake.
FAQs for Maud
Do you cover Maud for remedial sealant?
Yes. Our work covers the whole of Scotland, and Maud is part of that. Just email us at info@mrmastic.co.uk with a few details of the job, and we’ll send you a clear quote.
Do you cover smaller places like Maud?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Can I add another job to the visit?
Of course. Doing several areas at once is normally more efficient, so mention them when you ask for a quote.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you remove sealant that’s been put over old sealant?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
What happens if the problem is the tray or the plumbing?
We check for that before we reseal. If we find the leak is elsewhere, we tell you before going further.
Common problems we fix in Maud
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.
Keep an eye out for any of the following:
- Dark patches showing through the sealant
- Leaks that keep coming back after resealing
- Decorators’ caulk around a bath or shower
- Worktop sealant that has shrunk and split
For jobs in and around Maud, choosing the right material for each joint is as important as a tidy finish.
Comparing quotes
- Who turns up on the day
- Are they insured?
- Whether they seal over old material or remove it
- Is VAT in the price?
Towns and villages near Maud
What else we do in Maud
What affects the quote in Maud
The quote reflects the job in front of us. We look at:
- The amount of work
- Whether there’s mould to deal with
- Access and height
- How many areas need sealing
The cost depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
- A few photos by email, if you can
- The address or postcode of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
How it works
There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes a few hours, depending on how many layers have to come out, including the tidy-up. Somewhere like Maud may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
How to prepare
- Let us know if you’ve seen damp or leaks
- Plan for the work area to be out of bounds to pets and children
- Mention any parking rules near the property
How to get a quote
Every job is quoted individually, so start by telling us what you need. Simply drop us a line at info@mrmastic.co.uk and describe the job.
Read more
Can I do it myself?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What the job involves on each surface
Windows & doors
Some leaks around windows come from the wall or the window itself. We check the joint and tell you if it looks to be something else.
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. Once it’s all removed, the joint is treated.
Keeping the joints in good condition
Looking after new joints is easy:
- Look for stains below bathrooms now and then
- Do not wait for a small gap to become a leak
- Run the fan after every shower
- Keep movement joints clear of mortar and paint
Leave the new joint to cure fully before it gets wet or moves: generally around 24 hours, or as long as we advise.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into floors, walls or ceilings. Early action keeps it to a sealant job.