Aberdeenshire · Scotland

Remedial sealant & repairs in New Deer, Aberdeenshire

We cover New Deer for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.

  • Movement joints that have split or pulled away
  • Caulk or the wrong sealant used in a wet area
  • Dark patches showing through the sealant

Remedial sealant for New Deer homes and businesses

Keeping the joints in good condition

How long the joints last depends on use and care. We suggest:

  • Check trays and worktops do not move
  • Never fill a movement joint with mortar or grout
  • Run the fan after every shower
  • Find out why the sealant failed first

Watch the joint over the first few weeks, particularly where the original failure was caused by movement. Should anything change, drop us a line at info@mrmastic.co.uk.

Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.

Remedial sealant in New Deer

Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that is what we find, we will tell you rather than reseal something that won’t fix it. If you have a second bead peeling off the first and mould trapped under a layer of silicone, we can help.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

Mr Mastic applicator smiling as he applies silicone to the corner of a bath
Location
New Deer (AB53)
Region
Aberdeenshire
Guarantee
One year on every job
Quotes
A clear price before we start
Email
info@mrmastic.co.uk
Updated
26 October 2026

What affects the quote in New Deer

Call for a quick quote. What matters most is:

  • Whether old sealant or filler has to be cut out
  • Mould in or behind the old joints
  • Working hours on commercial sites
  • How easy the joints are to reach

Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

Helping us quote

To make quoting easier, please include:

  • Any previous sealing or DIY work
  • How we’d reach the joints
  • What the problem is, such as mould, gaps, leaks or cracking
  • Photos by email, if that is easy

Every job is quoted individually, so the first step is telling us about yours. Simply drop us a line at info@mrmastic.co.uk and describe the job and send photos if you have them.

Honest limits

In fairness, there are a few things sealant will not fix:

  • Movement from fittings that aren’t supported
  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
  • A cracked shower tray or bath (that needs repair or replacing)

If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer before you book.

Surfaces we seal

  • Leaking tray & enclosure joints
  • Failed movement joints
  • Shrunken worktop sealant
  • Botched or over-sealed joints
  • Expansion joints
  • Mouldy bath & shower sealant

New Deer questions

Is remedial sealant in New Deer guaranteed?

All our work, in New Deer and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.

Is New Deer in your area for remedial sealant?

Yes. We work across all of Scotland, and New Deer is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.

How do I get a quote for remedial sealant in New Deer?

The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.

Can you remove sealant that’s been put over old sealant?

Yes. Stripping layered sealant takes longer than a normal reseal, but it’s what makes the new bead last.

Do you work for landlords and businesses?

Yes, regularly. We can quote for several properties at once.

Do you do commercial work?

Yes. Hotels, offices and other businesses use us and we are fully insured.

Can you reseal a split movement joint?

Yes. The depth is set with backing so the sealant only bonds to the two sides.

How long will it take to strip and reseal the joint?

It takes a few hours for most joints, depending on how much old sealant has to come out. You will know the timing when we quote.

Landlord and commercial work in New Deer

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.

Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured.

What we’re called out for in New Deer

Even good sealant ages. Mould grows into the silicone, the surface hardens and the bead shrinks, especially in damp, poorly aired rooms. At that point it has to come out.

The most common problems we see are:

  • Worktop sealant that has shrunk and split
  • Decorators’ caulk around a bath or shower
  • Black mould underneath the bead
  • Over-sealed joints coming away

Around New Deer, as everywhere, remedial sealant is only as good as the preparation behind it.

Comparing quotes

  • What the cure time is
  • How the joint is cleaned and prepared
  • Who turns up on the day
  • Is VAT in the price?

How to choose a mastic man

How the visit works

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for most joints, depending on how much old sealant has to come out and we leave things clean and tidy. Outdoor work around New Deer depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.

  1. The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
  2. Old beads and residue are removed down to clean surfaces.
  3. Mould is treated and the joint dried.
  4. The right product goes in, with backing where the joint moves.
  5. The joint is tooled and you are told about anything else we found.

Preparing for the visit

  • Let us know about earlier repairs to the joints
  • Plan for the work area to be out of bounds to pets and children
  • Tell us about access, such as stairs, a lift or high-level joints

How to get a quote

The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.

Ask for a quote

Advice

Leave it or put it right?

DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. In an older home around New Deer, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.

Why New Deer clients choose us

  • Tidy, careful work
  • Domestic, commercial and hotel work
  • Colour agreed with you before any work starts
  • Arbo and Everbuild products

Read how sealant jobs are priced or what customers say.

Remedial sealant around New Deer

Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.

Homes close to New Deer Parish Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.

New Deer is about 13 miles south-west of Fraserburgh, in Aberdeenshire. Anywhere in AB53, our applicators can take on remedial sealant. 161 places in Aberdeenshire are on our list. For nearby work, see our Aberdeen page.

Jobs for remedial sealant in AB53 works the same way as everywhere else we cover. Streets in the area include Main Street, High Street and Fordyce Avenue, all of which we cover. If you’re just outside New Deer, we cover Turfhill (1 mile west), Maud (2 miles east), Auchnagatt (4 miles south-east), New Pitsligo (5 miles north) and Cuminestown (6 miles west). Larger places within reach include Peterhead (15 miles east), Fraserburgh (13 miles north-east), Ellon (11 miles south-east), Turriff (10 miles west), Roanheads (15 miles east) and Clerkhill (15 miles east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.

Near you in New Deer

Other landmarks nearby include Maud Hospital (2.5 miles east) and Maud Junction railway station (2.5 miles east).

Map of New Deer © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job