Shetland Islands · Scotland
Regrouting in Symbister
Our applicators work in Symbister on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Good tiles let down by tired grout
- Grout stained black or orange that won’t clean
- Floor grout that has worn and darkened
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.
About our regrouting in Symbister
We take the old grout out to a consistent depth, without damaging the edges of the tiles. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. Common call-outs are for floor grout that won’t come clean and greasy, stained grout behind the hob, across shower walls, wet rooms and bathroom floors.
For a place like Symbister, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Symbister (ZE2)
- Wider area
- Shetland Islands
- Cover
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Use a soft brush rather than a wire one
- Run the extractor fan during and after a shower
- Clean grout with a mild bathroom cleaner
- Have loose tiles looked at early
Give the new grout the time we tell you before using the shower, so it cures fully. After that, rinse the tiles after showering and let the room air.
Fixing grout early is a small job. Left for a few years, they can become a leak, so get it looked at when you notice it.
Do you need regrouting in Symbister?
Grout that was put in corners cracks as the bath or tray moves. Those joints should be silicone, and when they are not, water gets in.
Keep an eye out for these signs:
- Floor grout that has worn and darkened
- Grout in a colour the owner wants to change
- Cracked or crumbling grout lines
- Corners filled with grout instead of silicone
For jobs in and around Symbister, choosing the right material for each joint is as important as a tidy finish.
Before you book anyone
- Is the old sealant removed completely?
- How the joint is cleaned and prepared
- What happens if the job turns out different
- Whether VAT is included
Symbister homes and their sealant
Symbister is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
Around Symbister, as everywhere, regrouting is only as good as the preparation behind it.
Symbister is in the Shetland Islands. From the centre of Symbister to the outskirts, we cover regrouting for every kind of property, from flats and houses to offices and hotels. Our area takes in 63 places across the Shetland Islands.
Here we cover the ZE2 postcode area for regrouting. Whether your property is on Rocky Road, Saeter and North Gardentown or a nearby road, we can help. Other places close to Symbister include Sandwick (1 mile south-west), Clate (1 mile south), Hamister (1 mile north), Huxter (1 mile east) and Tripwell (1 mile north-east). We also work in nearby towns such as Lerwick (14 miles south), Sound (15 miles south) and Brae (12 miles west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Symbister
The countryside around Symbister includes Ward of Clett and Bu Water.
What happens on the day
We bring everything the job needs with us, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. Most jobs take a few hours for a shower enclosure, longer for a whole room. In smaller Scottish places, parking is normally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
Before we arrive
- Let us know about stairs, lifts or work at height
- Let us know about earlier repairs to the joints
- Clear items away from the joints we’re working on
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Read more
What the job involves on each surface
Bathroom wall tiles
Tiles away from the shower stay drier but grout there still discolours. New grout freshens them up.
Bathroom floors
Grout on a floor is walked on as well as wetted. It wears and darkens over time.
Questions from Symbister
What guarantee comes with regrouting in Symbister?
All our work, in Symbister and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do you cover Symbister for regrouting?
Yes. We work across all of Scotland, and Symbister is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Are you fully insured?
Yes. We’re fully insured for domestic and commercial work.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
How we quote for regrouting
Jobs vary more than people expect. The main factors:
- How easy the joints are to reach
- The product the joint needs
- Any working-time requirements on site
- The number and length of the joints
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The address or postcode of the job
- How we’d reach the joints
- Whether it has been sealed before
- Whether it’s a home or a business
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Landlords, agents and businesses in Symbister
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.