Shetland Islands · Scotland
Symbister Floor Joint Sealing
Our applicators work in Symbister on sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Failed seals where bathroom floors meet baths and panels
- Gaps opening between the floor and skirting
- Perimeter joints in tiled floors filled with grout
Different surfaces, different methods
Thresholds
Thresholds between rooms meet two floors and often a door frame. A flexible sealant suits both floor finishes.
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. We reseal them with a floor-joint product suited to the traffic.
Floor joint sealing in Symbister
Floors move, and the joint where they meet a wall, skirting, threshold or another floor has to move with them. We seal skirting gaps, tiled floor movement joints and concrete floor joints with a sealant suited to the movement and traffic. We are often asked to deal with rigid edge joints in tiled floors and dirt and water collecting in open floor joints, on tiled floors, thresholds and wet room & bathroom floors.
For a place like Symbister, the journey and access are planned in advance. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Symbister (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Looking after it afterwards
After the cure time, these simple habits help:
- Look at floor joints each spring
- Don’t slide heavy items over sealed joints
- Keep caulk for dry, still joints only
- Avoid sloshing water against skirting
Keep off the joint for the time we give you. Feet are generally fine before mopping or wheeled traffic so we will give you each time.
Cracks along tile grout lines come back unless the movement is dealt with. A flexible joint added early helps protect the tiles themselves.
When to call us in Symbister
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. Cracks often run straight along a line of joints, where a flexible joint should have been.
If you can see any of these, it’s time to have the joints looked at:
- Skirting that has pulled away from the floor
- Gaps between floors and kitchen plinths
- Failed joint filler in concrete floors
- Worn sealant at door thresholds
In and around Symbister, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Comparing quotes
- The length of the guarantee
- What insurance they hold
- Whether VAT is included
- Which colour the sealant will be
What we do, step by step
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours, depending on the length of joint. Somewhere like Symbister may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we check the joint and the floor and agree which sealant suits it.
- We take out any old caulk, sealant or grout along the line.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- The sealant goes in, chosen for the floor and coloured to suit it.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Plan for the work area to be out of bounds to pets and children
- Tell us if parking is tricky
- Move anything stored near the joints
Getting a quote
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, email us at info@mrmastic.co.uk.
Advice
Floor joint sealing in Symbister: local notes
Floors around the Shetland Islands run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal. Island jobs need planning around ferries and the weather, so the more notice, the better.
Whether the job is in Symbister itself or nearby, the right material for each joint matters as much as a neat finish.
Symbister is in the Shetland Islands. Whether you are in the middle of Symbister or further out, we cover floor joint sealing for every kind of property. Symbister is one of 63 towns and villages in the Shetland Islands we cover.
All of ZE2 is covered for floor joint sealing. Floor joint sealing is available to properties on Rocky Road, Saeter and North Gardentown. Neighbouring places we cover for floor joint sealing include Sandwick (1 mile south-west), Clate (1 mile south), Hamister (1 mile north), Huxter (1 mile east) and Tripwell (1 mile north-east). Larger places within reach include Lerwick (14 miles south), Sound (15 miles south) and Brae (12 miles west). For island and remote addresses, the job takes a little more planning.
Near you in Symbister
For a walk, there’s Ward of Clett and Bu Water.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Symbister questions
Will you come out to Symbister?
Yes. Symbister is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
What guarantee comes with floor joint sealing in Symbister?
Every job comes with our 12-month guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Can you add a movement joint to a tiled floor?
Often, yes, where it suits the floor. The grout is raked out and replaced with a flexible sealant in a colour to suit so the floor can move.
Can I do it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we are using and why.
Do you seal warehouse floor joints?
Yes. Concrete floor joints in warehouses and units are part of our work. The product is chosen for the traffic the floor takes.
Landlords, agents and businesses in Symbister
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
We also work for property managers and facilities teams. Several sites can go on one quote, and we’re fully insured for the work.
Why act early in Symbister
Left open, concrete joints break down under traffic. A sealed joint supports the edges before they need a bigger repair. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first and agree the price before starting.
What you get with us
- A choice of colours where the product allows
- Rated 4.9 stars on Google
- Quality sealants from Arbo and Everbuild
- Sanitary silicone with an anti-fungal additive in wet areas
Take a look at what affects the cost or customer reviews.