Surrey · England
Mastic man in CR6
We cover every part of the CR6 postcode district, which takes in Warlingham, Hamsey Green and Chelsham. Old sealant is always cut out completely, with a one-year guarantee.
Where we work in CR6
Services in CR6
- Bathroom & kitchen resealing
- Remedial sealant & repairs
- Regrouting
- Sand mastic for sash & case windows
- External & façade joints
- Window & door mastic
- New-build mastic & snagging
- Glazing & conservatory sealant
- Fire-rated sealant
- Gutter, fascia & soffit sealing
- Floor & skirting joints
- Commercial & hotel sealant
- All services
Tell us what needs doing and your postcode for a quick quote: ring 0345 464 0079 or drop us an email.
Postcodes nearby
Across Surrey
Every town in Surrey
Every area we cover
Bathroom resealing across CR6: what to expect
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. We work on baths, shower trays & enclosures and basins & vanity units, and common reasons people get in touch are new sealant laid over old sealant that is now lifting and black mould in the silicone that won’t clean off.
Once we are on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take two to three hours for a typical bath, depending on how much old sealant there is.
- We start by protecting the area and stripping out the old bead.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
What you’ll pay
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Why choose Mr Mastic
- One-year guarantee on every job
- An ARBOMaster approved applicator
- We agree the colour with you first
- White, clear, grey or another colour, product permitting
Ask for a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Around Warlingham
Around Warlingham, our work takes us to homes and buildings near The White Lion Public House, Blanchman's Farm and Warlingham Village Primary School, among other places. Other local landmarks include Church of All Saints (under half a mile north) and Warlingham School (0.8 miles north-west). For rail, the closest station is Upper Warlingham station, about 0.9 miles west. Other landmarks nearby include Warlingham Park Hospital (1.3 miles north-east) and East Surrey Museum (2 miles south-west). For a walk, there’s Nore Hill and South London Downs National Nature Reserve.
Bathroom resealing across CR6: local notes
In CR6, bathroom resealing takes in flats, houses, rentals and businesses, in Warlingham, Hamsey Green and Chelsham and well beyond. The method is the same everywhere: old material cut out, joints cleaned and dried, and a fresh finish laid.
The South East is one of the drier parts of the UK, but outdoor sealant still needs a dry day and clean surfaces, so outside work in CR6 is planned around the forecast.
Warlingham: For landlords with property near Upper Warlingham station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Homes close to Church of All Saints include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Keeping the joints in good condition
Simple care keeps the joints in good condition. Our advice:
- Let new sealant cure fully before it gets wet
- Check the joints every few months for splits or lifting
- Use gentle cleaners on the silicone
- Open a window or run the fan so the room dries
Clean the silicone with care: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. A reseal in time can save the worktop.
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
For landlords and businesses
We work for landlords and letting agents as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
What affects the cost of bathroom resealing
The price is agreed before any work begins. It’s based on:
- The number of rooms or windows
- Whether there’s mould to deal with
- Working hours on commercial sites
- The number and length of the joints
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or email us and we will give you an honest view and a quote.
Helping us quote
What to tell us when you ask for a quote:
- The rough size of the job
- If someone has resealed it before
- Photos by email, if that’s easy
- Whether it’s a home or a business
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job and send photos if you have them.
Why act early?
The difference in a professional reseal is mostly what you don’t see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early.
Questions to ask before you book
- What product goes in the joint
- How hidden problems are handled
- What preparation is included
- Whether they seal over old material or remove it
Questions from CR6
Can mouldy silicone be sorted out?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Good ventilation helps keep it away.
Do you work in CR6?
Yes. We cover CR6, as part of our work across South East England, London and Scotland. To book, phone 0345 464 0079 or email us.
What should I tell you?
A short description and the location, plus pictures if you have them. If we need more, we’ll ask.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Can I add another job to the visit?
Yes. Just list everything you need.
