Kent · England
Hales Place Floor Joint Sealing
Floor joint sealing for Hales Place, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Floor edges that trap water and grime
- Chipped and open joints in warehouse floors
- Rigid edge joints in tiled floors
Floor joint sealing in Hales Place
Good floor joints come down to the right product and clean, prepared edges. Old caulk, grout or failed sealant comes out first, then clean, back and seal the joint. Typical jobs include concrete floor joints that have broken down and gaps at thresholds between rooms, on commercial floors, concrete floor joints and skirting boards.
For a new home in or near Hales Place, it’s worth checking the sealant early. Common snags include open skirting joints, lifting shower seals and gaps around frames.
You are covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or email us.
- Place
- Hales Place (CT2, CT1)
- Region
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of floor joint sealing
We don’t publish a price list, because jobs vary so much. The quote depends on:
- Any mould that needs treating
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- How much old sealant there is and how hard it is to remove
Doing several joints on one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
What to tell us for a quote
What to tell us when you ask for a quote:
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- How many joints, rooms or windows are involved
We quote each job on its own, so start by telling us what you need. Simply phone 0345 464 0079 or drop us an email and describe the job.
Hales Place questions
Will you come out to Hales Place?
Yes, Hales Place is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Canterbury West station. Can you help?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
How much does floor joint sealing cost in Hales Place?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
When can I walk on the floor?
We give you a cure time for each joint. Feet are normally fine first, then mopping, then heavy wheels in most cases.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we’ll agree it with you first.
Can grout be replaced with sealant on a tiled floor?
In many cases, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant coloured to suit. If tiles are loose, that needs fixing first.
Do you use a paintable sealant?
It depends on the sealant, so let us know first. We use a paintable flexible sealant on joints you plan to paint and wet areas get silicone.
When to call us in Hales Place
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. You’ll see a crack running along the grout, showing where a movement joint was needed.
If you can see any of these, it’s time to have the joints looked at:
- Failed seals where bathroom floors meet baths and panels
- Floor edges that trap water and grime
- Worn sealant at door thresholds
- Open gaps along the bottom of skirting boards
For buildings such as Church of St Stephen, joints in its floors, skirtings and thresholds need resealing as they wear.
Before booking anyone
- Whether the sealant suits the joint
- What the cure time is
- How much experience the applicator has
- What guarantee comes with the work
What sealant work cannot fix
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Damaged concrete that needs breaking out and repairing
- Movement too big for a sealant joint
- Subfloor problems that need a flooring contractor
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
What we seal
- Wet room & bathroom floors
- Skirting boards
- Thresholds
- Tiled floors
- Concrete floor joints
- Commercial floors
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Floor joint sealing in Hales Place: local notes
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That’s why the skirting and threshold joints need a flexible seal.
If you let a flat or house near Canterbury West station, gaps at skirtings and thresholds are worth sealing between tenancies. Managing a site like St Stephen's Junior School? Then entrance and corridor floor joints take a lot of traffic.
Hales Place is about 1 mile north of Canterbury, in Kent. Anywhere in CT2, we can carry out floor joint sealing at your property. Hales Place is one of 922 towns and villages in Kent where we work for floor joint sealing. You can also see our page for Chelmsford, roughly 40 miles from Hales Place.
Every address in CT2 and CT1 is within our area for floor joint sealing, from the main roads to the quietest streets. We cover properties on Downs Road, Godden Road and Tunstall Road. We also cover Canterbury (1 mile south), Harbledown (1 mile south-west), Rough Common (1 mile west), Wincheap (2 miles south) and Upper Harbledown (2 miles west). Larger places within reach include Ashford (14 miles south-west), Margate (14 miles north-east), Dover (14 miles south-east), Sittingbourne (15 miles west), Folkestone (15 miles south) and Ramsgate (15 miles east).
What’s near Hales Place
Around Hales Place, our work takes us to homes and buildings near Archbishop's School, St Thomas of Canterbury Church and St Edmund's School and the streets around them. Also close by are Ye Olde Beverlie Inn (within half a mile south) and Bus Company Island (0.8 miles south). The closest station to Hales Place is Canterbury West station, about 0.8 miles south of the centre. Nearby you will also find Whitefriars Shopping Centre (1.2 miles south) and Canterbury Castle (1.4 miles south). Not far away are Blean Woods RSPB Reserve.
Nearby places to Hales Place
Other services in Hales Place
The process
You don’t need to clear the whole room or building, just the space around the work. We protect the rest, and the work takes a few hours for most rooms, longer for large commercial floors in most cases. A visit to Hales Place is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First we check the joint and the floor and agree which sealant suits it.
- We take out any old caulk, sealant or grout along the line.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- The sealant goes in, chosen for the floor and coloured to suit it.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Move anything stored near the joints
- Let us know about parking restrictions
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
Advice
Different surfaces, different methods
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. We reseal them with a floor-joint product suited to the traffic.
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. We reseal them with a sealant suited to wet areas.
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Act on grout cracks that run in a straight line
- Vacuum floor joints regularly to stop grit building up
- Use a well-wrung mop rather than flooding the floor
- Keep caulk for dry, still joints only
Mop with a well-wrung mop rather than flooding the floor. Less water at the edges helps the joints last.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.