Kent · England
Floor & skirting joints in Wincheap, Kent
We cover Wincheap for sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Skirting caulk that keeps splitting
- Failed seals where bathroom floors meet baths and panels
- Skirting that has pulled away from the floor
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. We suggest:
- Walk round the room once a year and look at the edges
- Use a well-wrung mop rather than flooding the floor
- Keep heavy wheels off new concrete joints until cured
- Have a cracking tiled floor checked before tiles break
Lift furniture rather than sliding it over sealed joints. Sharp edges can cut the sealant especially in the first few days.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.
Floor joint sealing in Wincheap, done properly
In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. Each is resealed with a floor-joint product suited to what runs over it. If you have concrete floor joints that have broken down and open gaps along the bottom of skirting boards, we can help, on commercial floors, tiled floors and wet room & bathroom floors alike.
Where new homes go up in smaller places like Wincheap, it’s often a small development or a single plot. Each still needs its sealant and floor joints finished properly from day one.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Wincheap (CT1, CT2)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How the job changes by surface
Wet room and bathroom floors
Mop water gets into any open joint at the edge of a bathroom floor. A neat silicone joint keeps it out.
Tiled floors
Large or heated tiled floors need room to move. Where needed, a line of grout is replaced with flexible sealant.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a morning or an afternoon for most homes, including the tidy-up. In a smaller place like Wincheap, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
- Mention any sign-in or site rules at work premises
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Related advice
What affects the quote in Wincheap
You will get a clear quote before any work starts. It’s based on:
- Which sealant suits the joint
- The number of rooms or windows
- Access and height
- The old material and how stubborn it is
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- Photos by email, if that is easy
- How many joints, rooms or windows are involved
- What the problem is, such as mould, gaps, leaks or cracking
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before we start.
What we cannot put right
We will not take on work that won’t last, so here’s what sealant can’t put right:
- Floors that are uneven or need levelling
- Tiles that have lifted or broken
- Damaged concrete that needs breaking out and repairing
If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think.
Surfaces we seal
- Skirting boards
- Concrete floor joints
- Commercial floors
- Thresholds
- Wet room & bathroom floors
- Tiled floors
Why act early in Wincheap
Putting new grout into a crack that keeps reappearing does not last. The movement is still there, so the grout fails again. Replacing that line with flexible sealant gives it somewhere to go. Homes in smaller places like Wincheap can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What you get with us
- Anti-fungal silicone where joints get wet
- Old sealant always removed completely
- Domestic, commercial and hotel work
- Fully insured
See what affects the cost and customer reviews.
Should I try it myself first?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Floor joint sealing in Wincheap: local notes
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
For site and facilities teams at buildings such as Wincheap Foundation Primary School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. Letting a property close to Canterbury East station? Then gaps at skirtings and thresholds are worth sealing between tenancies. Community buildings like Church of St Mildred are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Wincheap is about 1 mile south-west of Canterbury, in Kent. From the centre of Wincheap to the outskirts, floor joint sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Across Kent, we cover 922 places, and Wincheap is one of them. For nearby work, see our Chelmsford page (41 miles or so).
Jobs for floor joint sealing in CT1 and CT2 works the same way as everywhere else we cover. Whether your property is on Ada Road, Cow Lane and Back Lane or anywhere close by, we can help. Being close to the A2, Wincheap is simple for us to get to for floor joint sealing. If you’re just outside Wincheap, we cover Canterbury (1 mile north-east), Thanington (1 mile south-west), Harbledown (1 mile north-west), Stuppington (1 mile south) and Hales Place (2 miles north). We also work in nearby towns such as Ashford (13 miles south-west), Margate (15 miles north-east), Dover (14 miles south-east), Sittingbourne (15 miles west), Folkestone (14 miles south) and Ramsgate (15 miles east).
Around Wincheap
Typical jobs here are in homes near Canterbury School of Architecture, St Thomas of Canterbury Church and Duke's Head Public House and the streets around them. You will also find The Canterbury Academy (0.5 miles north-west) and Whitehall Meadows (less than half a mile north-west). There’s a railway station in Wincheap itself: Canterbury East station. Nearby you’ll also find Canterbury Castle (less than half a mile north-east) and Rupert Bear Museum (less than half a mile north-east). The countryside around Wincheap includes Blean Woods RSPB Reserve.
Places near Wincheap
More services for Wincheap
Wincheap questions
I let a flat near Canterbury East station. Can you help?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Is Wincheap in your area for floor joint sealing?
Yes. Our work covers London and the South East, and Wincheap is part of that. You can phone 0345 464 0079 or send us an email and let us know what needs doing, and we’ll give you a clear quote.
What information do you need?
A short description and the location, plus photos if you have them. If we need more, we’ll ask.
What does floor joint sealing cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Do you work on commercial floors?
Yes. We reseal concrete floor joints in commercial and industrial units. The product is chosen for the traffic the floor takes.
Why has a gap opened under my skirting?
Movement from drying timber and settling floors. Rigid fillers split, so we use a flexible sealant.
Is the work guaranteed?
Yes: twelve months. If anything is not right with the work within the year, let us know and we will sort it.