Kent · England
New-build mastic & snagging in Hales Place, Kent
Plot mastic for developers and snagging failed sealant in new homes for householders, landlords and businesses in Hales Place. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Gaps between new skirting and floors
- Worktop and upstand sealant coming away
- Gaps opening as the house dries out and settles
New build mastic in Hales Place, done properly
We work in new homes and on new-build sites across Hales Place. Whether it’s one en suite or a run of plots, the method is the same: cut out, clean, prime where needed and reseal neatly. We work on plot handovers, skirting & floors and bathrooms & en suites, and common reasons people get in touch are cracked sealant around new window and door frames and gaps opening as the house dries out and settles.
In and around Hales Place, floors range from older timber boards to tiles and newer finishes, from timber that moves with the seasons to tiles laid on concrete. The sealant at skirtings and thresholds has to suit the floor it meets.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Hales Place (CT2, CT1)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
How we quote for new build mastic
You’ll get a clear quote before any work starts. It takes into account:
- Access and height
- Mould in or behind the old joints
- Which sealant suits the joint
- The number of rooms or windows
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, ring 0345 464 0079 or send us an email and we will give you an honest view and a quote.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Any access issues, like height or stairs
- Photos by email, if that is easy
- Whether it has been sealed before
- The address or postcode of the job
For new build mastic in Hales Place, call 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before we start.
Towns and villages near Hales Place
More services for Hales Place
Common problems we fix in Hales Place
Sealant is often one of the last jobs before handover. Joints are not always cleaned of dust or primed, so the bead never bonds properly.
Look out for any of the following:
- Frame joints opening as the plaster dries
- Plot mastic for developers ahead of handover
- Gaps opening as the house dries out and settles
- Cracked caulk along new skirting
If you’ve bought a new home near Canterbury West station, the sealant around baths, showers and frames is worth checking in the first year or two.
Before you book anyone
- What the quote includes, VAT included or not
- The length of the guarantee
- How the colour is chosen
- Which sealant they’ll use, and why
FAQs for Hales Place
Can you help a landlord with a rental near Canterbury West station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Do you cover Hales Place for new build mastic?
Yes. Our work covers London and the South East, and Hales Place is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
Do you work for developers?
Yes. Plot mastic and second-fix sealing for developers is part of our work. Send us the plot schedule and we’ll quote.
What should I tell you?
Tell us what needs doing and where, with photos by email if possible. If we need more, we’ll ask.
Why has my new-build shower seal failed already?
New homes dry out and move in their first couple of years, and sealant is often rushed onto dusty, unprimed surfaces. Both lead to early failure.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How it works
You do not need to clear the whole room or building before we come, just the space around the work. Everything nearby is protected, and the work takes a few hours for most snagging lists, longer for a run of plots in most cases. Parking around Hales Place is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We go through the snagging list or plot schedule and agree the joints to do.
- The old bead comes out in full, with no layer left behind.
- Surfaces are cleaned of building dust and primed where needed.
- We apply a sealant that suits each joint and tool it to a neat finish.
- Each area is checked and left with its cure time.
How to prepare
- Keep pets and children clear of the area while we work
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
Ask for a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.
Advice
Why act early in Hales Place
A tube of sealant from the DIY shop won’t fix the cause: dust, no primer and old sealant left in the joint. Cutting out, cleaning and priming are what make the difference. In an older home around Hales Place, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Doing several joints on one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why book with us
- Experience in homes, commercial sites and hotels
- More than 20 years in sealant work
- We never seal over old sealant
- Colour agreed with you before we start
See our cost guide or what customers say.
Surface by surface
Windows and doors
External mastic around new windows and doors is sometimes rushed or missed. We reseal it with a weatherproof, flexible sealant.
Plot handovers
Good preparation at handover saves snagging later. Dust from the build is removed first and prime where the product needs it.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Resist patching a failed seal with a tube from the DIY shop
- Wait for the cure time before using a resealed shower
- Do not wait for the house to settle if water is getting through
- Ventilate bathrooms well, especially in the first year
Ventilation matters in a new home, which is still drying out. Run the fan or open a window after bathing to help keep mould away.
If a shower tray or bath seal splits in the first year, look for movement. Have it resealed, and the tray or bath checked, before it gets worse.
When something else is needed
A few problems are outside what sealant work can do:
- Settlement cracks that need a surveyor
- Damaged fittings that need replacing
- Plumbing faults behind the sealant
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly before you book.
What we seal
- Plot handovers
- Skirting & floors
- Bathrooms & en suites
- Kitchens
- Show homes
- Windows & doors
New homes and floors in Hales Place
Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Around Hales Place, as everywhere, new build mastic is only as good as the preparation behind it.
Hales Place is about 1 mile north of Canterbury, in Kent. For new build mastic in and around Hales Place, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We’re based in Crawley and cover Kent, Hales Place included. Hales Place is one of 922 towns and villages in Kent we cover for new build mastic. Chelmsford is on our list too, around 40 miles away.
Here we cover the CT2 and CT1 postcode area for new build mastic. Streets in the area include Downs Road, Godden Road and Tunstall Road, all of which we cover. If you are just outside Hales Place, we cover Canterbury (1 mile south), Harbledown (1 mile south-west), Rough Common (1 mile west), Wincheap (2 miles south) and Upper Harbledown (2 miles west). We also work in nearby towns such as Ashford (14 miles south-west), Margate (14 miles north-east), Dover (14 miles south-east), Sittingbourne (15 miles west), Folkestone (15 miles south) and Ramsgate (15 miles east).
What’s near Hales Place
Locally, jobs take us to homes and businesses close to Archbishop's School, St Thomas of Canterbury Church and St Edmund's School. You will also find Ye Olde Beverlie Inn (under half a mile south) and Bus Company Island (0.8 miles south). The nearest railway station is Canterbury West station, roughly 0.8 miles south. Well-known places in the area include Whitefriars Shopping Centre (1.2 miles south) and Canterbury Castle (1.4 miles south). Not far away are Blean Woods RSPB Reserve.