Kent · England
Glazing Silicone in Hales Place
Glazing silicone for conservatories, rooflights, glass panels and shower screens in Hales Place, with a one-year guarantee on every job. Call for a quick quote.
- Leaks where conservatory glass meets the frame
- A quick top-up bead that didn’t last
- Silicone pulling away from the glass
FAQs for Hales Place
Is Hales Place in your area for glazing silicone?
Yes, Hales Place is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Is Hales Place within the area you cover?
Yes. Hales Place is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is balustrade sealant something you do?
Yes, where the base is finished with sealant. Photos help us see what’s there when you ring 0345 464 0079 or email us.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
What does glazing silicone cost?
Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or send us an email and let us know what needs doing and where.
Can a conservatory leak be sealed?
In many cases, as long as sealant is the cause. We find where the water gets in first before any sealing.
Do you replace glass?
No, our work is the silicone. A glazier replaces glass and units.
Glazing silicone in Hales Place, done properly
Many conservatory leaks come down to failed sealant at the glass-to-frame or frame-to-wall joints. We find the joint that’s letting water in and renew it, and if it’s something sealant cannot fix, we’ll tell you. Common call-outs are for silicone pulling away from the glass and shower screens leaking along the wall or tray, across glass-to-glass joints, glass-to-frame joints and rooflights.
In a smaller place like Hales Place, some walls face open ground and catch the full force of the weather. That’s hard on the mastic around frames and sills.
You get a one-year guarantee, the same in Hales Place as everywhere else we work.
- Place
- Hales Place (CT2, CT1)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Nearby places to Hales Place
Other services in Hales Place
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a few hours, depending on how many joints need doing from start to finish. For a job in Hales Place, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We look at the glazing and agree which joints need resealing.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- The joints are checked before we leave.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
Advice
What glazing silicone looks like in Hales Place
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Managing a site like St Stephen's Junior School? Then larger buildings have plenty of frames, and the mastic around each one ages. Homes close to Church of St Stephen include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Hales Place is about 1 mile north of Canterbury, in Kent. We provide glazing silicone to homeowners, landlords and businesses in Hales Place and the surrounding area. 922 places in Kent are on our list, from the larger towns to small villages. Our Chelmsford page covers work nearby (40 miles or so).
Work in CT2 and CT1 is quoted and booked the same way as anywhere else. If you need glazing silicone at a property on Downs Road, Godden Road and Tunstall Road or anywhere close by, we can help. We also cover the places around Hales Place: Canterbury (1 mile south), Harbledown (1 mile south-west), Rough Common (1 mile west), Wincheap (2 miles south) and Upper Harbledown (2 miles west). Further out, we also cover Ashford (14 miles south-west), Margate (14 miles north-east), Dover (14 miles south-east), Sittingbourne (15 miles west), Folkestone (15 miles south) and Ramsgate (15 miles east).
Around Hales Place
We work in homes and buildings around Archbishop's School, St Thomas of Canterbury Church and St Edmund's School, among other places. Also close by are Ye Olde Beverlie Inn (within half a mile south) and Bus Company Island (0.8 miles south). The nearest railway station is Canterbury West station, about 0.8 miles south of the centre. Well-known places in the area include Whitefriars Shopping Centre (1.2 miles south) and Canterbury Castle (1.4 miles south). Open spaces near Hales Place include Blean Woods RSPB Reserve.
Why it’s worth doing now in Hales Place
Resealing can’t fix a failed unit or a cracked panel. We will tell you that rather than seal it anyway and point you to a glazier or roofer. Homes in smaller places like Hales Place can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first.
Why book with us
- White, clear, grey or another colour, product permitting
- We never seal over old sealant
- We agree the colour with you first
- We’re fully insured
Read what affects the cost and our reviews.
What the job involves on each surface
Glass-to-glass joints
Glass-to-glass joints depend entirely on the sealant. It must be clean, neat and well bonded.
Conservatory frames
Conservatory frame joints are a common source of leaks. We remove the failed sealant and renew it.
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
If you manage several properties in or around Hales Place, several properties can go on one quote. Just tell us the addresses and what each one needs.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Keeping the joints in good condition
Aftercare is simple:
- Get a new leak looked at quickly
- Keep air moving in the conservatory
- Use a gentle glass cleaner and a soft cloth
- Look over the glazing joints once a year
Avoid scraping near the new silicone when cleaning the glass. Stick to a soft cloth.
Don’t leave lifting or mouldy silicone on glazing. Peeling silicone lets water in behind and the problem grows.
When to call us in Hales Place
UV light ages silicone and roof joints get the most sun. Old silicone hardens, cracks and loses its grip to the glass and frame.
Signs it’s time to call us include:
- Leaks where conservatory glass meets the frame
- Drips on the inside of a conservatory window
- Glass-to-glass joints that have split
- Black or yellowed silicone on glass joints
If you let a flat or house near Canterbury West station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.
What to look for in a quote
- What happens if they find a problem under the old sealant
- Which colour the sealant will be
- Whether they’re fully insured
- Who does the work, and how experienced they are