Kent · England
Commercial & hotel sealant in Hales Place, Kent
Sealant work for offices, hotels, washrooms and commercial buildings in Hales Place, with a one-year guarantee on every job. Ask us for a quote.
- Black, stained silicone in guest bathrooms
- Silicone laid over old silicone by a previous contractor
- Worktop sealant that has shrunk and stained
Commercial sealant in Hales Place
Office kitchens, staff washrooms and welfare facilities need to be usable every working day. We can plan the work for early mornings or out of hours so the working day is disturbed as little as possible. Each area is handed back with its cure time. We work on retail & leisure sites, student & care accommodation and welfare facilities, and the jobs we see most are failed joints in office kitchens and tea points and split sealant where wet room floors meet walls.
Commercial work around a smaller place like Hales Place generally means a pub, a shop, a school or small business units rather than office blocks. Each needs the same care with its sealant as any larger building.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or drop us an email.
- Where
- Hales Place (CT2, CT1)
- Region
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Workplaces and buildings in Hales Place
Hales Place has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Canterbury West station, several rental properties can be resealed on one programme. For site and facilities teams at buildings such as St Stephen's Junior School, busy washrooms and kitchens can be resealed in phases so they stay open.
Hales Place is about 1 mile north of Canterbury, in Kent. From the centre of Hales Place to the outskirts, we cover commercial sealant for every kind of property, from flats and houses to offices and hotels. Our Kent coverage runs to 922 places, Hales Place among them. Our Chelmsford page covers work nearby, about 40 miles away.
We cover every part of the CT2 and CT1 postcode area for commercial sealant. Whether your property is on Downs Road, Godden Road and Tunstall Road or a nearby road, we can help. Nearby, we also carry out commercial sealant in Canterbury (1 mile south), Harbledown (1 mile south-west), Rough Common (1 mile west), Wincheap (2 miles south) and Upper Harbledown (2 miles west). We also work in nearby towns such as Ashford (14 miles south-west), Margate (14 miles north-east), Dover (14 miles south-east), Sittingbourne (15 miles west), Folkestone (15 miles south) and Ramsgate (15 miles east).
Around Hales Place
Locally, jobs take us to homes and businesses close to Archbishop's School, St Thomas of Canterbury Church and St Edmund's School. You will also find Ye Olde Beverlie Inn (under half a mile south) and Bus Company Island (0.8 miles south). The closest station to Hales Place is Canterbury West station, about 0.8 miles south. Other landmarks nearby include Whitefriars Shopping Centre (1.2 miles south) and Canterbury Castle (1.4 miles south). Open spaces near Hales Place include Blean Woods RSPB Reserve.
Common questions in Hales Place
Do you work in hotels near Hales Place?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you work for landlords with property near Canterbury West station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status.
How long will you be here?
Typically it takes anything from a few hours to several days, depending on the number of rooms. Bigger jobs take longer, and we’ll say how long yours will take.
Can I choose the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
How to look after the new joints
So the new joints stay in good condition:
- Keep a record of which rooms were resealed and when
- Ask cleaners to go gently on the silicone
- Pass on the cure time to whoever cleans the rooms
- Encourage users to squeegee shower walls
Extract fans need to work. Where a room has no window, the fan is what dries it out, and that is what keeps mould away.
Signs to look for: mould, splits, peeling corners or water marks downstairs. Any of these means the joints need attention.
How we quote for commercial sealant
Your quote is based on your job. We look at:
- How many areas need sealing
- How easy the joints are to reach
- The size of the job
- The type of sealant required
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What to tell us for a quote
What to tell us when you ask for a quote:
- Any previous sealing or DIY work
- Where the property is
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before any work starts.
Why it’s worth doing now in Hales Place
Guests and staff judge a building by its bathrooms. Mouldy silicone looks unhygienic, however hard housekeeping work, and cleaning rarely puts it right. New sealant does. Around Hales Place, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Why Hales Place clients choose us
- Old sealant always removed completely
- 180+ five-star Google reviews
- Anti-fungal sanitary silicone in wet areas
- More than 20 years in sealant work
Take a look at how sealant jobs are priced or what customers say.
Also near Hales Place
Also in Hales Place
Different surfaces, different methods
Office washrooms & kitchens
Long vanity tops have joints that hold water and grime. It’s cut out, cleaned and resealed in one neat line.
Retail & leisure sites
Changing areas and showers at leisure sites are wet all day, so anti-fungal sanitary silicone is the product we use.
What we can’t put right
In fairness, there are a few things sealant will not fix:
- Extraction that isn’t working, which needs an electrician or ventilation contractor
- Damaged sanitaryware that needs replacing
- Faulty shower valves and leaking traps
If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer.
What we seal
- Office washrooms & kitchens
- Rental portfolios
- Student & care accommodation
- Retail & leisure sites
- Hotel bathrooms
- Welfare facilities
How it works
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours per area, with larger sites planned over several visits. A visit to Hales Place is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we visit and agree the scope, the sequence and the working hours.
- Room by room, we protect the area and remove all the old sealant.
- The joints are degreased, treated and left to dry.
- Anti-fungal sanitary silicone goes into wet areas, with suitable sealants elsewhere.
- Each room is checked and handed back with its cure time.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
- Keep pets and children clear of the area while we work
How to get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work and send you a clear quote.
Related advice
Common problems we fix in Hales Place
A rushed reseal between guests rarely lasts. Sealing over old silicone, sealing wet joints or using the wrong product all lead to the same thing: another reseal before long.
If you can see any of these, it’s time to have the joints looked at:
- Tired sealant in let properties
- Shower leaks reaching the floor below
- Washrooms that need sorting before an inspection
- Silicone laid over old silicone by a previous contractor
For buildings such as Church of St Stephen, any kitchen and washrooms need the same sealant care as any other building.
Comparing quotes
- Is VAT in the price?
- Whether the sealant suits the joint
- Which colour the sealant will be
- Are they insured?