Glasgow · Scotland
Shawlands Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Shawlands. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Old fire sealant that has split or come away
- Fire stopping disturbed by later work
- Unsealed gaps around fire door frames
Fire rated sealant for homes and businesses in Shawlands
We often work from an action list drawn up by a fire risk assessor for buildings in Shawlands. If you share the list, we can quote for the gaps that need fire-rated sealant. We work on linear gaps, plasterboard & masonry and service penetrations, and common reasons people get in touch are old fire sealant that has split or come away and unsealed gaps where pipes and cables go through a wall.
Scotland’s cities have offices, hotels, student flats, care homes and tenement blocks looked after by factors. In Shawlands, that can mean resealing washrooms room by room or fire-rated sealant around pipes and cables in common areas.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Shawlands (G41, G43, G42)
- Wider area
- Glasgow
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What sealant work cannot fix
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- Fire doors that need new seals, closers or hardware
- A wall that isn’t a fire-resisting element to begin with
- Certifying a building or signing off its fire safety
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before you book.
Surfaces we seal
- Service penetrations
- Flats & HMOs
- Door frames
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
Also near Shawlands
What else we do in Shawlands
When to call us in Shawlands
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. We see plenty of fire stopping that was hurried.
Look out for any of the following:
- Linear gaps at the head of walls
- Seals cut through by electricians, plumbers or data installers
- Old fire sealant that has split or come away
- Sealant items on a fire risk assessment action list
Schools such as Shawlands Academy are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- Is the old sealant removed completely?
- Who turns up on the day
- How the joint is cleaned and prepared
- Which sealant they’ll use, and why
How we quote for fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Whether the work is at height
- Any mould that needs treating
- The number and length of the joints
- Whether old sealant or filler has to be cut out
The cost reflects the work involved, not guesswork. That’s why we ask a few questions first and agree the price before starting.
Asking for a quote
Before you ask for a quote, have a think about:
- The type of property
- What’s wrong with the joints now
- Where the property is
- The rough size of the job
We do not publish a price list. Instead, we give you a clear quote for your job. To get started, drop us a line at info@mrmastic.co.uk.
Workplaces and buildings in Shawlands
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments. Shawlands has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you look after a church, hall or community building such as Shawlands Trinity Church and Halls, gaps around pipes and cables are worth checking after any building work there. Rented homes near Shawlands station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Shawlands is about 2 miles south of Glasgow, in Glasgow. Whether you’re in the middle of Shawlands or further out, we cover fire rated sealant for every kind of property. Our Glasgow coverage runs to 183 places, Shawlands among them.
Every address in G41, G43 and G42 is covered for fire rated sealant, from the main roads to the quietest streets. Whether your property is on Iser Lane, Haggs Road and Hector Road or a nearby road, our applicators can take on the job. Shawlands sits on or near the A77, which makes travel easy. We also cover Langside (1 mile south-east), Pollokshaws (1 mile south-west), Crossmyloof (1 mile north), Auldhouse (1 mile south-west) and Strathbungo (1 mile north-east). We also work in nearby towns such as Hillhead (3 miles north), Dowanhill (3 miles north), Woodlands (3 miles north), Woodside (3 miles north), North Kelvinside (4 miles north) and Partickhill (3 miles north).
Around Shawlands
Around Shawlands, our work takes us to homes and buildings near Queen's Park, Couper Institute and Library and The Sir John Stirling Maxwell pub, among other places. There’s a railway station in Shawlands itself: Shawlands station. Other landmarks nearby include Scottish Football Museum (1.4 miles east) and Silverburn Shopping Centre (2.1 miles west). For a walk, there’s Cathkin Braes.
Shawlands: your questions answered
I let a flat near Shawlands station. Can you help?
Yes. We work for landlords and agents as well as homeowners. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Do you work for hotels and guest houses in Shawlands?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
Do you certify the fire stopping?
Ratings and certificates are not something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Do you carry out fire risk assessments?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Do you come to Shawlands?
Yes. We’re based in Crawley and work across South East England, London and Scotland.
How long does the job take?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll confirm how long when we quote.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Check whether a sealant can be painted before decorating over it
- Get damaged fire seals looked at promptly
- Look in service cupboards and ceiling voids from time to time
- Make resealing part of every contractor’s brief
Follow the cure time we give you before decorating over the sealant. Not every fire-rated sealant takes paint.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
How the visit works
There’s no need to move everything out, only the area right around the joints. We protect the rest, and the work takes from a few hours to a few days, depending on the number of gaps and the access in most cases. Parking in city streets around Shawlands can be tight or controlled, so it helps to know about permits or nearby bays. For flats, mention the door entry system and any shared-stair arrangements.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Preparing for the visit
- On commercial sites, let us know about site rules
- Keep pets and children clear of the area while we work
- Clear items away from the joints we are working on
How to get a quote
Need a quote? Please send an email to info@mrmastic.co.uk with a few details. We will explain what we’d do and give you a clear quote before work begins.
Advice
How the job changes by surface
Door frames
Our work is the joint between frame and wall. Doors, seals and closers are for a door specialist.
Flats and HMOs
Conversions generally leave a mix of old and new service holes. We seal the ones on your specification with a tested product.