Glasgow · Scotland
Fire-rated sealant in Pollokshields, Glasgow
Our applicators work in Pollokshields on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Linear gaps at the head of walls
- Old fire sealant that has split or come away
- Gaps left after a refit or conversion
Fire rated sealant in Pollokshields, done properly
Filling a fire-stopping gap with standard silicone or caulk doesn’t make it fire-rated. We cut out the wrong material and the gap is resealed with a product tested for that use. We work on service penetrations, linear gaps and plasterboard & masonry, and people most often call us about sealant items on a fire risk assessment action list and gaps left after a refit or conversion.
In a Scottish city, commercial sealant work covers offices, hotels, student accommodation, care homes and factored tenement blocks. In Pollokshields, that can mean resealing washrooms room by room or fire-rated sealant around pipes and cables in common areas.
Every job is covered by our 12-month guarantee, wherever you are in Glasgow.
- Where
- Pollokshields (G41, G42, G5)
- Wider area
- Glasgow
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Questions from Pollokshields
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
I let a flat near Pollokshields West station. Can you help?
Yes. We work for landlords and agents as well as householders. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Do you do fire sealant around door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant following the tested details. The door, its seals and closer are for a door specialist.
Do you provide details of the products used?
Yes. We record the locations we’ve sealed and the products used for your files.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Is there a guarantee?
Yes. All our work carries our 12-month guarantee.
What does intumescent mean?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent ones swell in heat, and they’re one of the options. We use whichever the specification and tested details call for.
What the job involves on each surface
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first.
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before work begins.
Workplaces and buildings in Pollokshields
There are hotels and other places to stay in and around Pollokshields. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
If you let a flat or house near Pollokshields West station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Managing a site like Craigholme School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Pollokshields is about 1 mile south of Glasgow, in Glasgow. Jobs in Pollokshields get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Pollokshields is one of 183 places in Glasgow where we work for fire rated sealant.
We work across the G41, G42 and G5 postcode area for fire rated sealant. Local streets include Bruce Road, Minard Road and Leslie Road. Close by, we work in Strathbungo (1 mile south-east), Crossmyloof (1 mile south-west), Kinning Park (1 mile north-west), Govanhill (1 mile east) and Crosshill (1 mile south-east). We also work in nearby towns such as Dowanhill (3 miles north), North Kelvinside (3 miles north), Partickhill (3 miles north-west), Kelvinside (3 miles north), Hyndland (3 miles north-west) and Wyndford (3 miles north).
Local landmarks in Pollokshields
Locally, jobs take us to homes and businesses close to Shawlands Academy, Glasgow Women's Library and 51 pub, among other places. Nearby too are Queen's Park (0.8 miles south-east) and Our Lady and St Margaret's Primary School (0.7 miles north). Pollokshields has its own railway station: Pollokshields West station. Nearby you will also find Princes Square (1.6 miles north-east) and Scotland Street School Museum (0.7 miles north). Not far away are Hogganfield Loch and Cathkin Braes.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
The process
On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are, including the tidy-up. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. In Pollokshields, it helps to know the floor, the door entry arrangements and the nearest parking.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
How to prepare
- Keep pets and children clear of the area while we work
- Let us know about parking restrictions
- Mention any leaks or damp you’ve noticed
Getting a quote
If you are in Pollokshields and need fire rated sealant, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Read more
Places near Pollokshields
Other services in Pollokshields
Looking after it afterwards
After the cure time, these simple habits help:
- Ask every contractor to reseal any fire stopping they disturb
- Ask which product was used before you paint
- Never patch a fire seal with standard sealant
- Store the list of sealed gaps with your building paperwork
Avoid covering a sealed gap with anything that isn’t part of the tested detail. Repairs should use a matching fire-rated product. We can tell you which product we used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We look at:
- When we can work, for business premises
- The number and length of the joints
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- The rough size of the job
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
We quote each job on its own. Just drop us a line at info@mrmastic.co.uk with the details and send pictures if you have them.
When to call us in Pollokshields
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. We see plenty of fire stopping that was hurried, especially where it was squeezed in at the end of a project.
It’s worth asking for a quote if you see:
- Holes left by a change of layout
- Damaged fire sealant left by other trades
- Ordinary sealant used where a fire-rated product was needed
- Unsealed gaps where pipes and cables go through a wall
Community buildings like Trinity U.F Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Before you book anyone
- How the surfaces are prepared before sealing
- Whether they seal over old material or remove it
- The length of the guarantee
- How hidden problems are handled
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Sign-off of the building, which sits with building control or your assessor
- Walls or floors that weren’t built to resist fire
- Openings too large for sealant, which need batts, boards or another system
If you’re not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer before you book.
Surfaces we seal
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
- Service penetrations