Glasgow · Scotland
Fire Rated Sealant in Pollokshaws
Fire rated sealant across Pollokshaws and nearby, with old sealant always removed completely and a 12-month guarantee.
- Gaps flagged on a fire risk assessment
- Ordinary sealant used where a fire-rated product was needed
- Gaps left after a refit or conversion
Fire rated sealant in Pollokshaws, done properly
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. We work on flats & HMOs, door frames and plasterboard & masonry, and people most often call us about gaps flagged on a fire risk assessment and unsealed gaps around fire door frames.
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. In Pollokshaws, as anywhere, fire-rated sealant goes in to the product’s tested details and washroom sealant is chosen to cope with heavy use.
Every job is covered by our 12-month guarantee, wherever you are in Glasgow.
- Where
- Pollokshaws (G41, G43, G42)
- Region
- Glasgow
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How we quote for fire rated sealant
The price is agreed before any work begins. It’s based on:
- Mould in or behind the old joints
- Working hours on commercial sites
- Which sealant suits the joint
- The old material and how stubborn it is
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- Where the property is
- Roughly how big the job is
- Whether it’s a home or a business
- Any access issues, like height or stairs
If you’re in Pollokshaws and need fire rated sealant, email us at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
What fire rated sealant looks like in Pollokshaws
There are hotels and other places to stay in and around Pollokshaws. Hotel work can be planned room by room, with out-of-hours working where needed. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
For site and facilities teams at buildings such as Shawlands Academy, fire-stopping around service openings should be restored whenever new services go in.
Pollokshaws is about 2 miles south of Glasgow, in Glasgow. Anywhere in G41, we can carry out fire rated sealant at your property. Pollokshaws is one of 183 towns and villages in Glasgow we cover.
Every address in G41, G43 and G42 is within our area for fire rated sealant, from the main roads to the quietest streets. If you need fire rated sealant at a property on Haggs Road, Hector Road and Lochlea Road or a nearby road, our applicators can take on the job. Main roads around Pollokshaws include the A77, so getting to you is simple. If you are just outside Pollokshaws, we cover Auldhouse (1 mile south-west), Shawlands (1 mile north-east), Langside (1 mile east), Hillpark (1 mile south) and Crossmyloof (1 mile north). We also work in nearby towns such as Hillhead (3 miles north), Dowanhill (4 miles north), Woodlands (3 miles north), Woodside (4 miles north), North Kelvinside (4 miles north) and Partickhill (3 miles north).
Around Pollokshaws
Typical jobs here are in homes near Couper Institute and Library, The Sir John Stirling Maxwell pub and Pollok Country Park. Pollokshaws has its own railway station: Pollokshaws West station. Other landmarks nearby include Silverburn Shopping Centre (1.7 miles west) and Glasgow Victoria Infirmary (1.1 miles east). Not far away are Cathkin Braes.
When to call us in Pollokshaws
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it is not installed as tested. We see plenty of fire stopping that was hurried particularly when it was the last job before handover.
These are the problems we’re asked about most:
- Door frames with gaps between frame and wall
- Unsealed gaps where pipes and cables go through a wall
- Sealant items on a fire risk assessment action list
- Old fire sealant that has split or come away
Rented homes near Pollokshaws West station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Before booking anyone
- What the cure time is
- What insurance they hold
- How much experience the applicator has
- How the joint is cleaned and prepared
For landlords and businesses
Landlords and letting agents in Pollokshaws can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before the sealant goes in.
Your questions about fire rated sealant in Pollokshaws
How do Scotland’s building regulations apply to fire-rated sealant in Pollokshaws?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Do you take on hotel work around Pollokshaws?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Do you come to Pollokshaws?
We do. Pollokshaws is part of the area we cover.
Do you do fire sealant around door frames?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame.
Do you carry out fire risk assessments?
No, assessment isn’t something we do. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.
What does fire rated sealant cost?
Size, access and the old material all affect the cost. Ask us for a quote.
Leave it or put it right?
Sealant isn’t the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. We’ll say so if a gap needs something other than sealant. For landlords in Pollokshaws, damp and leaks can be a Repairing Standard issue, so failed sealant is best replaced before it becomes a complaint.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why us?
- We leave the area clean and tidy
- Quality sealants from Arbo and Everbuild
- ARBOMaster approved applicator
- Sanitary silicone with an anti-fungal additive in wet areas
Read how sealant jobs are priced and customer reviews.
Honest limits
We’ll always be straight with you, so here’s what new sealant won’t do:
- Certifying a building or signing off its fire safety
- A wall that isn’t a fire-resisting element to begin with
- Large holes that need a different fire-stopping system
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.
What we seal
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Door frames
- Flats & HMOs
What else we do in Pollokshaws
The process
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes a few hours for a handful of gaps, and longer for a whole building. Parking in city streets around Pollokshaws can be tight or controlled, so it helps to know about permits or nearby bays. If you are in a flat, let us know how we get in at the street door.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
- Mention any sign-in or site rules at work premises
Get a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details and send pictures if you have them.