Perth and Kinross · Scotland
Ruthvenfield Fire Rated Sealant
Problem with your fire-stopping gaps in Ruthvenfield? We remove the old material, prepare the joints and seal them properly.
- Gaps filled with a product that is not fire-rated
- Cracked or shrunken fire-rated sealant
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant in Ruthvenfield
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. We work on linear gaps, door frames and pipe & cable gaps, and common reasons people get in touch are open gaps behind door architraves and gaps left after a refit or conversion.
For holiday lets, guest houses and community buildings in or near Ruthvenfield, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
The work is covered for a year after we finish. If anything is not right with it, email us at info@mrmastic.co.uk.
- Location
- Ruthvenfield (PH1)
- Wider area
- Perth and Kinross
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Should I try it myself first?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Common questions in Ruthvenfield
How do Scotland’s building regulations apply to fire-rated sealant in Ruthvenfield?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you cover smaller places like Ruthvenfield?
Yes, Ruthvenfield is covered. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you offer different sealant colours?
In most cases you can choose. We’ll explain which colours are available.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
How long will you be here?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including the preparation. We will confirm how long when we quote.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Can tenants book the work?
Yes. Check with your landlord; we can send the quote to them too.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Why deal with it now?
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the sealing itself is often a contained piece of work. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
Why us?
- One-year guarantee on every job
- Neat joints and a tidy finish
- Fully insured
- ARBOMaster approved applicator
See our cost guide or customer reviews.
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- The amount of work
- When we can work, for business premises
- The old material and how stubborn it is
- Mould in or behind the old joints
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
What we need to know
You don’t need to know the technical terms. Just tell us:
- Whether it has been sealed before
- Where the property is
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved and give you a clear price.
Common problems we fix in Ruthvenfield
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole they leave does not always get resealed.
Look out for these signs:
- Standard silicone or caulk in a fire-stopping gap
- Gaps flagged on a fire risk assessment
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
For buildings such as St Serf's Church, service openings in its walls need the right fire-rated sealant, as in any building.
Comparing quotes
- Whether VAT is included
- Which colour the sealant will be
- What happens if the job turns out different
- Who turns up on the day
What the job involves on each surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
Flats and HMOs
Converted houses often have gaps around old and new services. We seal the ones on your specification with a tested product and record where they are.
The process
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. Outside jobs in Ruthvenfield need a dry day, because sealant won’t bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Mention any parking rules near the property
- Move anything stored near the joints
- Tell us about any water getting in
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, send an email to info@mrmastic.co.uk.
Related advice
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Ask which product was used before you paint
- Look in service cupboards and ceiling voids from time to time
- Flag any open gap you spot round a pipe or cable
- Keep general-purpose foam and caulk away from fire-stopping gaps
Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and have them put right.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the job gets bigger.
Fire rated sealant around Ruthvenfield
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
If you look after a building such as Bertha Park High School, gaps opened by contractors for new cabling are a common finding in schools and offices. Letting a property close to Perth station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Ruthvenfield is about 2 miles north-west of Perth, in Perth and Kinross. Anywhere in PH1, we cover fire rated sealant for homes and businesses. Our Perth and Kinross coverage runs to 107 places, and Ruthvenfield is one of them. We also work in Dundee, about 20 miles from Ruthvenfield.
Work in PH1 is quoted and booked the same way as anywhere else. Fire rated sealant is available to properties on Castle Brae, Tarry Row and Ruthvenfield Road. We also cover Huntingtower (1 mile south), Hillyland (1 mile south-east), Tulloch (1 mile east), Letham (1 mile south-east) and Luncarty (3 miles north). Within a short drive, we also cover Blairgowrie and Rattray (14 miles north-east), Crieff (14 miles west), Auchterarder (11 miles south-west), Kinross (14 miles south), Scone (3 miles east) and Coupar Angus (13 miles north-east).
Landmarks near Ruthvenfield
For rail, the closest station is Perth station, about 2.4 miles south-east. A little further out are Murray Royal Hospital (2.9 miles east) and St John's Shopping Centre (2.5 miles south-east). Not far away are Dupplin Lake and Mailer Hill.