Perth and Kinross · Scotland
Luncarty Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Luncarty, with a one-year guarantee on every job. Ask us for a quote.
- Standard silicone or caulk in a fire-stopping gap
- Open joints along the top of partitions
- Sealant items on a fire risk assessment action list
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
Fire rated sealant for homes and businesses in Luncarty
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. The right product depends on the gap size, the substrate and what passes through. We work on door frames, service penetrations and plasterboard & masonry, and common reasons people get in touch are open gaps behind door architraves and standard silicone or caulk in a fire-stopping gap.
In a smaller place like Luncarty, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Where
- Luncarty (PH1)
- Wider area
- Perth and Kinross
- Cover
- One year on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What happens on the day
Before we leave, we go over the finished joints with you. The visit itself normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. For a place like Luncarty, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Before we arrive
- Mention if the joints have been sealed before
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about parking restrictions
Get a quote
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Advice
Landlords, agents and businesses in Luncarty
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Do you need fire rated sealant in Luncarty?
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It looks sealed, but it isn’t fire-rated.
Most people get in touch after spotting something like this:
- Gaps flagged on a fire risk assessment
- Holes left by a change of layout
- Fire stopping disturbed by later work
- Linear gaps at the head of walls
If you look after a building such as Bertha Park High School, fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- Which colour the sealant will be
- What guarantee comes with the work
- Whether they’re fully insured
- What the quote includes, VAT included or not
Also near Luncarty
Other services in Luncarty
Leave it or put it right?
Sealant is not the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap is not suitable for sealant, we’ll tell you. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
What you get with us
- We leave the area clean and tidy
- Arbo and Everbuild products
- Domestic, commercial and hotel work
- We never seal over old sealant
See what affects the cost and our reviews.
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- Access and height
- Mould in or behind the old joints
- The product the joint needs
- The old material and how stubborn it is
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please email us at info@mrmastic.co.uk and we’ll talk you through it.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- Where the job is, and your postcode
- What’s wrong with the joints now
Need a quote? Please email us at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear price before any work starts.
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Fire risk assessments, which need a qualified assessor
- Problems with the door itself rather than the gap around the frame
- Large holes that need a different fire-stopping system
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before you book.
What we seal
- Flats & HMOs
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Pipe & cable gaps
- Door frames
Commercial buildings in Luncarty
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
If you look after a church, hall or community building such as Redgorton Church, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Perth station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Luncarty is about 4 miles north of Perth, in Perth and Kinross. If you need fire rated sealant in Luncarty, please drop us a line at info@mrmastic.co.uk for a quick quote. We cover Perth and Kinross from our Crawley base, Luncarty included. Across Perth and Kinross, we cover 107 places, and Luncarty is one of them. We also work in Dundee, about 19 miles from Luncarty.
Every address in PH1 is covered for fire rated sealant, from the main roads to the quietest streets. If you need fire rated sealant at a property on Marshall Road, Marshall Place and Marshall Gardens or a nearby road, we can help. We also cover Stormontfield (1 mile east), Stanley (2 miles north), Tulloch (3 miles south), Guildtown (3 miles north-east) and West Tofts (3 miles north). We also work in nearby towns such as Perth (4 miles south), Blairgowrie and Rattray (11 miles north-east), Crieff (15 miles west), Auchterarder (14 miles south-west), Letham (3 miles south) and Scone (3 miles south-east).
Local landmarks in Luncarty
For rail, the closest station is Perth station, roughly 4.2 miles south. Other landmarks nearby include Scone Palace (2.2 miles south-east) and Murray Royal Hospital (4 miles south-east).
Luncarty questions
Is Luncarty within the area you cover?
Yes, Luncarty is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Perth station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.
Can ordinary silicone be used in a fire-stopping gap?
No. A gap that needs fire stopping needs a tested fire-rated product fitted to the maker’s details.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Do you guarantee your work?
Yes, for a year. If there’s a problem with our work in that time, tell us and we’ll put it right.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What do you need from me for a quote?
Just the basics: the address or postcode, what’s wrong and any access issues. Then drop us a line at info@mrmastic.co.uk.
Do you carry out fire risk assessments?
No. That’s for a fire risk assessor, designer or building control. Our job is applying the sealant to their specification.