Perth and Kinross · Scotland
Guildtown Fire Rated Sealant
Our applicators work in Guildtown on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Fire stopping disturbed by later work
- Gaps filled with a product that isn’t fire-rated
- Fire seals that have cracked with movement
Fire rated sealant in Guildtown
Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. Typical jobs include ordinary sealant used where a fire-rated product was needed and door frames with gaps between frame and wall, across flats & HMOs, plasterboard & masonry and service penetrations.
For a place like Guildtown, the journey and timings are planned in advance, so the job can fit around guests, residents or opening hours where possible.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Guildtown (PH2)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlords, agents and businesses in Guildtown
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Places near Guildtown
Also in Guildtown
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
How the job changes by surface
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
The process
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes a few hours for a handful of gaps, and longer for a whole building. Outside jobs in Guildtown need a dry day, because sealant won’t bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Plan for the work area to be out of bounds to pets and children
How to get a quote
To get a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Read more
What we are called out for in Guildtown
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. Rushed fire stopping is common particularly when it was the last job before handover.
Signs it’s time to call us include:
- Damaged fire sealant left by other trades
- Sealant items on a fire risk assessment action list
- Old fire sealant that has split or come away
- Unsealed gaps around fire door frames
If you look after a church, hall or community building such as Cambusmichael Church, service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- Who turns up on the day
- Whether all the old sealant comes out first
- How the colour is chosen
- How the surfaces are prepared before sealing
Why deal with it now?
Paying for fire stopping that has to be redone is a false economy. Work that does not follow the tested detail may have to come out again once someone inspects it. In an older home around Guildtown, damp from a failed joint can get into timber and plaster.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Why choose Mr Mastic in Guildtown
- Neat joints and a tidy finish
- 20+ years of sealant experience
- Approved under the ARBOMaster scheme
- 4.9 on Google from 180+ five-star reviews
Take a look at what affects the cost and customer reviews.
Guildtown: your questions answered
Are the rules for fire-rated sealant different in Scotland?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Is Guildtown in your area for fire rated sealant?
Yes, Guildtown is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.
Will you assess my building’s fire safety?
No. Your fire risk assessor, designer or building control decides that. Our job is applying the sealant to their specification.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is intumescent sealant the same as fire-rated sealant?
Intumescent means it swells when heated. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Is there a guarantee?
Yes. Each job is guaranteed for twelve months, wherever you are.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
Do you hold any approvals?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Fire rated sealant around Guildtown
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
In and around Guildtown, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Guildtown is about 5 miles north of Perth, in Perth and Kinross. We carry out fire rated sealant for homes and businesses in Guildtown. Our Perth and Kinross coverage runs to 107 places, and Guildtown is one of them. We also work in Dundee, about 16 miles from Guildtown.
Here we cover the PH2 postcode area for fire rated sealant. You’ll find streets such as Oakbank Road, Northfield Road and Main Road, all of which we cover. Close by, we work in Stanley (2 miles west), West Tofts (2 miles north-west), Stormontfield (2 miles south-west), Luncarty (3 miles south-west) and Scone (4 miles south). Within a short drive, we also cover Perth (5 miles south), Blairgowrie and Rattray (8 miles north), Letham (6 miles south-west), Alyth (12 miles north-east), Coupar Angus (7 miles north-east) and Oakbank (6 miles south).
Landmarks near Guildtown
Locally, jobs take us to homes and businesses close to Stobhall New Library. Well-known places in the area include Perth Royal Infirmary (5 miles south) and Inchbervis Castle (0.8 miles north-west). The countryside around Guildtown includes Dunsinane Hill and Lily Loch.
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We look at:
- Access and height
- The size of the job
- How much old sealant there is and how hard it is to remove
- The type of sealant required
Combining jobs into one visit normally makes better use of the time than several visits. We’ll give you a clear price for the lot.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- The address or postcode of the job
- If someone has resealed it before
- Whether it’s a home or a business
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.