Glasgow · Scotland
Port Dundas Fire Rated Sealant
Fire rated sealant in Port Dundas from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Standard silicone or caulk in a fire-stopping gap
- Linear gaps at the head of walls
- Gaps left after a refit or conversion
Fire rated sealant for homes and businesses in Port Dundas
We can work through a building room by room or floor by floor. That record is useful for your files and for whoever looks at the building next. We are often asked to deal with linear gaps at the head of walls and joints picked up in a fire-stopping survey, across pipe & cable gaps, service penetrations and flats & HMOs.
Scotland has its own building regulations, with their own technical handbooks. In Port Dundas, as anywhere, fire-rated sealant goes in to the product’s tested details and washroom sealant is chosen to cope with heavy use.
All of our work is guaranteed for twelve months, in Port Dundas and everywhere else we cover.
- Location
- Port Dundas (G4, G2, G3)
- Region
- Glasgow
- Cover
- One year on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Leave it or put it right?
Doing it once, properly, beats doing it twice. Work that does not follow the tested detail may have to come out again once someone inspects it. Scottish rain finds any gap around a frame or wall joint, and in Port Dundas, damp can spread through stone and plaster before anyone sees it.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why choose Mr Mastic in Port Dundas
- Experience in homes, commercial sites and hotels
- We never seal over old sealant
- Sanitary silicone with an anti-fungal additive in wet areas
- Every job guaranteed for a year
See what affects the cost and our reviews.
Looking after it afterwards
After the cure time, these simple habits help:
- Check risers, ceiling voids and cupboards during building checks
- Store the list of sealed gaps with your building paperwork
- Flag any open gap you spot round a pipe or cable
- Keep general-purpose foam and caulk away from fire-stopping gaps
Follow the cure time we give you before decorating over the sealant. Not every fire-rated sealant takes paint, so ask us which we used.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
What affects the quote in Port Dundas
There’s no set price list, because jobs vary so much. What we look at:
- The type of sealant required
- The number of rooms or windows
- Whether the work is at height
- The amount of work
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Helping us quote
You don’t need to know the technical terms. Just tell us:
- A few photos by email, if you can
- Any access issues, like height or stairs
- The problem you’ve noticed
- Whether it has been sealed before
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, email us at info@mrmastic.co.uk.
When something else is needed
Before you book, it’s worth knowing the limits too:
- Openings too large for sealant, which need batts, boards or another system
- Doors that aren’t fire doors in the first place
- Sign-off of the building, which sits with building control or your assessor
If you are not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before booking.
Where we work in Port Dundas
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
- Service penetrations
- Door frames
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The process
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself normally takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. For a job in Port Dundas, tell us the floor, how the door entry system works and where we can park nearby.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Keep children and pets away from the work area
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
Ask for a quote
Want a quote for fire rated sealant? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Workplaces and buildings in Port Dundas
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments. Port Dundas has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you look after a building such as St Aloysius' College, fire-stopping around service openings should be restored whenever new services go in. Letting a property close to Glasgow Queen Street station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Port Dundas is about 2 miles north-east of Glasgow, in Glasgow. Wherever you are in the G4 postcode area, our applicators can take on fire rated sealant. Port Dundas is one of 183 towns and villages in Glasgow we cover.
Jobs for fire rated sealant in G4, G2 and G3 is quoted and booked the same way as anywhere else. We cover properties on Possil Road, Dawson Road and Braid Square and the roads around them. With the A804 close by, Port Dundas is easy for our applicators to reach. We also cover the places around Port Dundas: Cowcaddens (1 mile south-west), Hamiltonhill (1 mile north-west), Sighthill (1 mile east), Townhead (1 mile south-east) and Garnethill (1 mile south-west). We also work in nearby towns such as Langside (3 miles south), Yoker (5 miles west), Mount Florida (4 miles south), Hillpark (4 miles south), Shawlands (3 miles south-west) and Temple (3 miles north-west).
Near you in Port Dundas
In Port Dundas, that means homes and buildings near Andersonian Library, St Vincent Street Church and College of Piping, among other places. You’ll also find Kelvingrove Park (1.3 miles west) and 81 pub (0.7 miles south). Port Dundas’s nearest station is Glasgow Queen Street station, roughly 0.7 miles south of the centre. Other landmarks nearby include Bishop's Castle (1 mile south-east) and Chinatown (within half a mile south-west). Open spaces near Port Dundas include Hogganfield Loch and Lenzie Moss.
Places near Port Dundas
Other services in Port Dundas
Port Dundas questions
Do you work for landlords with property near Glasgow Queen Street station?
Yes, we work for letting agents and landlords. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will give you a clear price.
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
What fire rating will the seal have?
We don’t give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we fit a product whose tested details meet it with a record of each location.
How much does fire rated sealant cost in Port Dundas?
Every job is different, so each one gets its own quote. For a quick quote, send an email to info@mrmastic.co.uk with a short description of the job.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Do you take on fire stopping in schools and offices?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.