Glasgow · Scotland
Fire-rated sealant in Temple, Glasgow
Specialist fire rated sealant for Temple: careful preparation, the right product and tidy work. Call for a quick quote.
- Damaged fire sealant left by other trades
- Unsealed gaps around fire door frames
- Linear gaps at the head of walls
What affects the quote in Temple
Jobs vary more than people expect. What affects the quote:
- How much there is to do
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
Combining jobs into one visit is generally more efficient than separate visits. You’ll get one clear quote for the whole job.
Asking for a quote
When you call or email, it’s useful to know:
- The rough size of the job
- Where the job is, and your postcode
- Any access issues, like height or stairs
- Photos by email, if that’s easy
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.
Fire rated sealant in Temple, done properly
Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We are often asked to deal with unsealed gaps where pipes and cables go through a wall and holes left by a change of layout, across service penetrations, linear gaps and flats & HMOs.
Scotland has its own building regulations, with their own technical handbooks. For buildings in Temple, fire-rated sealant is installed to the manufacturer’s tested details, and washroom and kitchen sealant is chosen for heavy use.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Place
- Temple (G13, G12, G61)
- Region
- Glasgow
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Fire rated sealant around Temple
Temple has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
If you let a flat or house near Anniesland station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Managing a site like Knightswood Secondary School? Then fire-stopping around service openings should be restored whenever new services go in.
Temple is about 3 miles north-east of Renfrew, in Glasgow. Whether you’re in the middle of Temple or further out, fire rated sealant is available for homes and businesses alike. Temple is one of 183 places in Glasgow where we work.
Work in G13, G12 and G61 works the same way as everywhere else we cover. You’ll find streets such as Fern Lane, Ilay Road and Ryvra Road, all of which we cover. Temple is on the A82, which makes it straightforward to reach with everything needed for fire rated sealant. We also cover the places around Temple: Anniesland Cross (1 mile south), Anniesland (1 mile south-west), Netherton (1 mile north), Knightswood (1 mile west) and Kelvindale (1 mile east). We also work in nearby towns such as Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south).
Around Temple
Around Temple, our work takes us to homes and buildings near Glasgow University Library, Jordanhill College and Lock 27 pub and the streets around them. There’s a railway station in Temple itself: Anniesland station. Other landmarks nearby include Glasgow Museum of Transport (2.1 miles south-east) and Partick Castle (1.9 miles south-east). The countryside around Temple includes Kilmardinny and Castle Hill.
When to call us in Temple
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Any of these means the joints need attention:
- Joints picked up in a fire-stopping survey
- Unsealed gaps around fire door frames
- Ordinary sealant used where a fire-rated product was needed
- Old fire sealant that has split or come away
Community buildings like All Saints Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Questions to ask before you book
- What the cure time is
- What preparation is included
- Is the old sealant removed completely?
- Who turns up on the day
Aftercare tips
Good habits help new joints last longer. Our tips:
- Allow for resealing whenever new services are run
- Check risers, ceiling voids and cupboards during building checks
- Photograph sealed gaps before they’re covered up
- Never patch a fire seal with standard sealant
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is usually a straightforward job.
What happens on the day
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes from a few hours to a few days, depending on the number of gaps and the access. Parking in city streets around Temple can be tight or controlled, so it helps to know about permits or nearby bays. If you are in a flat, let us know how we get in at the street door.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- Mention if the joints have been sealed before
- Plan for the work area to be out of bounds to pets and children
- Move anything stored near the joints
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Read more
Honest limits
We will not take on work that will not last, so these are the limits:
- Fire doors that need new seals, closers or hardware
- Walls or floors that weren’t built to resist fire
- Big openings where sealant alone isn’t the tested solution
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before you book.
Where we work in Temple
- Service penetrations
- Door frames
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
Nearby places to Temple
More services for Temple
How the job changes by surface
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. Each one is sealed to the product’s tested detail, and tell you if sealant alone isn’t the right fix.
Common questions in Temple
Do you work for hotels and guest houses in Temple?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
I let a flat near Anniesland station. Can you help?
Yes, we work for landlords and agents. Just send an email to info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Do you provide details of the products used?
Yes. You get a list of where we worked and what we used.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before any work starts.
What fire rating will the seal have?
Ratings and certification sit with the product’s test evidence and whoever specified the work. Our part is installing the specified product to its tested details and list the locations and products for you.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Is there a guarantee?
Yes, always. There’s a 12-month guarantee on every job, large or small.
Is it messy?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
For landlords and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
We also work for property managers and facilities teams in Temple and across Glasgow. We can quote a run of properties together.