Glasgow · Scotland
Glazing & conservatory sealant in Temple, Glasgow
Problem with your glazing joints in Temple? We remove the old material, prepare the joints and seal them properly.
- Water getting into a conservatory at the joints
- Leaking glazing joints on a rooflight
- New silicone smeared over old sealant
How we handle glazing silicone in Temple
Glass replacement isn’t something we do and a misted double-glazed unit needs a glazier. What we do is the silicone around the glass, which is where many leaks start. If you are dealing with water running down inside the glass and glass-to-glass joints that have split, we can help, on glass-to-glass joints, glass-to-frame joints and conservatory frames alike.
Sash and case windows are a feature of older tenements in all four Scottish cities, and plenty still have them. Whether you’re in a tenement flat or a house in Temple, the joint between frame and wall is what keeps the weather out.
The work is covered for a year after we finish. If anything isn’t right with it, drop us a line at info@mrmastic.co.uk.

- Where
- Temple (G13, G12, G61)
- Wider area
- Glasgow
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Leave it or put it right?
Dealing with a leaking shower screen early protects the floor and ceiling. Water from a failed joint can soak into the floor before you notice. Wind-driven rain gets into any failed joint on the outside of a city building, and in Temple, damp can spread through stone and plaster before anyone sees it.
Combining jobs into one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why Temple clients choose us
- One-year guarantee on every job
- Anti-fungal sanitary silicone in wet areas
- We agree the colour with you first
- 20+ years of sealant experience
Take a look at what affects the cost and what customers say.
Nearby places to Temple
More services for Temple
How the job changes by surface
Glass-to-glass joints
Glass-to-glass joints depend entirely on the sealant. The bead needs to be tidy and fully bonded.
Rooflights
Water around a rooflight is not always the sealant. We check which it is.
FAQs for Temple
Is Temple in your area for glazing silicone?
Yes. We work across all of Scotland, and Temple is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing.
How is work on the outside of a tenement in Temple usually arranged?
It normally goes through the owners together, or through the factor if the building has one. The Tenements (Scotland) Act 2004 covers the common parts where the deeds don’t.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Can a conservatory leak be sealed?
That depends where the water is getting in. Sealant joints we can renew, but roof panels and structural problems need a conservatory specialist or roofer.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
What does glazing silicone cost?
It depends on the job, so we quote each one individually. For a quick quote, send an email to info@mrmastic.co.uk and tell us what needs doing and where.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Do you work for landlords and businesses?
Yes, often. Several properties can go on one quote.
Quotes for glazing silicone in Temple
Jobs vary more than people expect. The main factors:
- The amount of work
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- Working hours on commercial sites
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
What we need to know
To help us quote quickly, let us know:
- A few pictures by email, if you can
- Any previous sealing or DIY work
- The rough size of the job
- What’s wrong with the joints now
Asking for a quote is easy: let us know what needs doing and where. A few photos by email make the job easier to understand, and we’ll take it from there.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What we cannot put right
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Leaks from the roof covering or flashing (a roofer’s job)
- A roof that has moved or dropped
- A frame that needs repairing or replacing
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Glass-to-glass joints
- Shower screens
- Rooflights
- Glass-to-frame joints
- Conservatory frames
- Glass balustrade bases
Landlord and commercial work in Temple
We also work for property managers and facilities teams. Several sites can go on one quote.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Windows and doors in Temple
Under the Tenements (Scotland) Act 2004, shared parts of a tenement, such as the roof and outside walls, are looked after by the owners together, and many buildings use a factor to arrange it. Who owns the windows depends on the title deeds. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.
Rented homes near Anniesland station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows. If you live in an older home near All Saints Church, the joint between an old wall and a newer frame is generally the first place rain gets in. For site and facilities teams at buildings such as Knightswood Secondary School, its window and door frames need their mastic kept sound, just like a home’s.
Temple is about 3 miles north-east of Renfrew, in Glasgow. Jobs in Temple get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Temple is one of 183 places in Glasgow we cover for glazing silicone.
Our applicators cover all of G13, G12 and G61 for glazing silicone and the streets around it. That includes homes and businesses on Fern Lane, Ilay Road and Ryvra Road and the roads around them. Temple sits on or near the A82, which makes travel easy. Close by, we work in Anniesland Cross (1 mile south), Anniesland (1 mile south-west), Netherton (1 mile north), Knightswood (1 mile west) and Kelvindale (1 mile east). Within a short drive, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south).
Near you in Temple
In Temple, that means homes and buildings near Glasgow University Library, Jordanhill College and Lock 27 pub and the streets around them. Temple has its own railway station: Anniesland station. Other landmarks nearby include Glasgow Museum of Transport (2.1 miles south-east) and Partick Castle (1.9 miles south-east). Green spaces nearby include Kilmardinny and Castle Hill.
How it works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for most jobs from start to finish. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. For a job in Temple, tell us the floor, how the door entry system works and where we can park nearby.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
- Keep children and pets away from the work area
How to get a quote
Want a quote for glazing silicone? Please email us at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
