Glasgow · Scotland
Floor & skirting joints in Temple, Glasgow
Specialist floor joint sealing for Temple: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Failed seals where bathroom floors meet baths and panels
- Rigid edge joints in tiled floors
- Concrete floor joints that have broken down
About our floor joint sealing in Temple
Across Temple, we seal floor and skirting joints in homes and businesses. Each job starts with looking at the floor and the gap, since that decides which sealant suits. We work on wet room & bathroom floors, commercial floors and thresholds, and common reasons people get in touch are failed joint filler in concrete floors and failed seals where bathroom floors meet baths and panels.
New flats and houses are still being built in and around Scotland’s cities, and new-home owners often find sealant snags in the first year or two.
Your job is guaranteed for a year, as with all our work.
- Location
- Temple (G13, G12, G61)
- Wider area
- Glasgow
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
How we quote for floor joint sealing
The quote reflects the job in front of us. We look at:
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
- How much there is to do
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What we need to know
You don’t need to know the technical terms. It helps if you can tell us:
- Whether it’s a home or a business
- If someone has resealed it before
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
What else we do in Temple
Why deal with it now?
The right product depends on the floor and the traffic: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Getting that choice wrong is a common reason joints fail. In a Scottish city tenement, failed sealant affects more than one flat: a leak can come through the ceiling below, and gaps in shared walls or fire-rated joints matter to every flat.
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk and we will give you an honest view and a quote.
Why us?
- Quality sealants from Arbo and Everbuild
- We never seal over old sealant
- White, clear, grey or coloured to suit, where the product allows
- Over 20 years’ experience
Read how sealant jobs are priced and customer reviews.
How the visit works
When we arrive, we look over the joints with you first. We protect the surfaces around the joints before any work begins. Most jobs take a few hours for most rooms, longer for large commercial floors. Parking in city streets around Temple can be tight or controlled, so it helps to know about permits or nearby bays. For flats, mention the door entry system and any shared-stair arrangements.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- The joint is tooled neatly and the cure time explained.
How to prepare
- Keep pets and children clear of the area while we work
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
How to get a quote
Asking for a quote is easy: tell us what needs doing and where. Photos by email help us understand the job, and we’ll come back to you with a quote.
Read more
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Do you need floor joint sealing in Temple?
Some floors were never given a perimeter gap or movement joint. It pushes against the walls and skirting as it expands.
Look out for any of the following:
- Concrete floor joints that have broken down
- Gaps opening between the floor and skirting
- Worn sealant at door thresholds
- Failed seals where bathroom floors meet baths and panels
If you let a flat or house near Anniesland station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Before booking anyone
- Which sealant they’ll use, and why
- How the colour is chosen
- Whether they seal over old material or remove it
- How the joint is cleaned and prepared
Temple questions
Is there a guarantee on floor joint sealing in Temple?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Can you help a landlord with a rental near Anniesland station?
Yes, we work for landlords and letting agents. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will give you a clear quote.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
My floor grout keeps cracking in a line. Can you help?
Normally, yes. Straight cracks in grout often show where a movement joint was needed. We replace that grout with a flexible joint.
How much does floor joint sealing cost in Temple?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
When can I walk on the floor?
Follow the cure time we give you. Light use comes first, cleaning and heavy traffic later.
Surface by surface
Commercial floors
Commercial floors take more traffic than most homes. We talk through the traffic and choose a sealant suited to it.
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. We rake out any grout there and reseal.
What we cannot put right
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Subfloor problems that need a flooring contractor
- Loose, hollow or cracked tiles, which need a tiler
- Concrete repairs beyond the joint
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think.
Joints and surfaces we work on
- Tiled floors
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
- Commercial floors
- Skirting boards
Floor joint sealing around Temple
Across Glasgow, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal. Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.
Managing a site like Knightswood Secondary School? Then entrance and corridor floor joints take a lot of traffic. If you look after a church, hall or community building such as All Saints Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Temple is about 3 miles north-east of Renfrew, in Glasgow. Anywhere in G13, we can carry out floor joint sealing at your property. Our Glasgow coverage runs to 183 places, Temple among them.
All of G13, G12 and G61 is within our area for floor joint sealing. We cover properties on Fern Lane, Ilay Road and Ryvra Road. Temple sits on or near the A82. Other places close to Temple include Anniesland Cross (1 mile south), Anniesland (1 mile south-west), Netherton (1 mile north), Knightswood (1 mile west) and Kelvindale (1 mile east). Within a short drive, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south).
Landmarks near Temple
In Temple, that means homes and buildings near Glasgow University Library, Jordanhill College and Lock 27 pub. Temple has its own railway station: Anniesland station. Nearby you’ll also find Glasgow Museum of Transport (2.1 miles south-east) and Partick Castle (1.9 miles south-east). For a walk, there’s Kilmardinny and Castle Hill.